SC-HTE200-SQTxxxx.book 1 ページ ２０１５年４月２７日 月曜日 午前１０時２分 Operating Instructions Home Theater Audio System Model No. SC-HTE200 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Model number suffix “EB” denotes UK model.
SC-HTE200-SQTxxxx.book 2 ページ ２０１５年４月２７日 月曜日 午前１０時２分 Safety precautions WARNING CAUTION Unit Unit ≥ To reduce the risk of fire, electric shock or product damage, jDo not expose this unit to rain, moisture, dripping or splashing. jDo not place objects filled with liquids, such as vases, on this unit. jUse only the recommended accessories. jDo not remove covers. jDo not repair this unit by yourself. Refer servicing to qualified service personnel.
SC-HTE200-SQTxxxx.book 3 ページ ２０１５年４月２７日 月曜日 午前１０時２分 (For the AC mains plug of three pins) For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 10-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 10-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse.
SC-HTE200-SQTxxxx.book 4 ページ ２０１５年４月２７日 月曜日 午前１０時２分 Table of contents Safety precautions ........................................................................................... 2 Caution for AC Mains Lead ............................................................................. 3 Before use Supplied items.................................................................................................. 5 This system (SC-HTE200) .....................................................................
SC-HTE200-SQTxxxx.book 5 ページ ２０１５年４月２７日 Supplied items 月曜日 午前１０時２分 Before use This system (SC-HTE200) Precautions ∏ 1 Main unit (speaker) (SC-HTE200) Before use Accessories Check the supplied accessories before using this system. (N2QAYC000098) ∏ 1 AC mains lead For the United Kingdom and Ireland (SFQ0018) For Continental Europe (SFQ0016) Getting started ∏ 1 Remote control (with a battery) Reference Operations ≥ Product numbers are correct as of March 2015. These may be subject to change.
SC-HTE200-SQTxxxx.book 6 ページ ２０１５年４月２７日 月曜日 午前１０時２分 Control reference guide This system (Front) 1 2 6 1 2 4 1 1 5 1 7 [ ] NFC touch area (> 13, 14) [Í/I] Standby/on switch (Í/I) Touch to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
SC-HTE200-SQTxxxx.book 7 ページ ２０１５年４月２７日 月曜日 午前１０時２分 ∫ To replace a button-type battery Remote control Battery type: CR2025 (Lithium battery) 1 5 2 INPUT 3 SETUP 6 SOUND 7 OK 8 ≥ Set the button-type battery with its (i) mark facing upward.
SC-HTE200-SQTxxxx.book 8 ページ ２０１５年４月２７日 Connections Getting started ≥ Turn off all equipment before connection and read the appropriate operating instructions. Do not connect the AC mains lead until all other connections are completed. ∫ HDMI (High-Definition Multimedia Interface) ≥ The HDMI connection supports VIERA Link “HDAVI Control” (> 19) when used with a compatible Panasonic TV. ≥ Use the ARC compatible High Speed HDMI Cables. Non-HDMI-compliant cables cannot be utilised.
SC-HTE200-SQTxxxx.book 9 ページ ２０１５年４月２７日 [B] Not Labelled “HDMI (ARC)” 月曜日 午前１０時２分 Connection from an HDMI compatible device You can direct the audio signal from the connected Blu-ray Disc player, DVD player, Set Top Box, etc. to this system. Preparation ≥ Connect the main unit to the TV. (> 8) Getting started e.g.
SC-HTE200-SQTxxxx.book 10 ページ ２０１５年４月２７日 Connection from an other device (AUX) You can connect a device such as a Blu-ray Disc recorder, DVD recorder, game machine, or set top box. 月曜日 午前１０時２分 AC mains lead connection ≥ Connect only after all other connections are completed. A e.g., Set top box R L AUDIO OUT A AC mains lead (supplied) B To a household mains socket ≥ This system consumes a small amount of AC power (> 24) even when it is turned off.
SC-HTE200-SQTxxxx.book 11 ページ ２０１５年４月２７日 月曜日 午前１０時２分 Placement ≥ Make sure the TV is upright and not bent when setting up the TV on top of this unit. Also, do not put heavy objects on this unit. or try to get on it. Be particularly careful when there are small children around. This may result in tipping, breakage, and injury. Safety precaution When the TV is less than 50 kg, and the pedestal of the TV is within 590 mm (width) by 355 mm (depth), you can put the TV on top of this unit.
SC-HTE200-SQTxxxx.book 12 ページ ２０１５年４月２７日 Preventing tipping The TV may tip over during incidents such as earthquakes. Take measures to prevent tipping and falling for your safety. ≥ The information in this section is presented to help you reduce the damage caused by tipping or falling due to earthquakes, but is not meant to guarantee this effect in the event of an earthquake or similar incident.
SC-HTE200-SQTxxxx.book 13 ページ ２０１５年４月２７日 月曜日 午前１０時２分 Bluetooth® connection ≥ Refer to the operating instructions of the Bluetooth® device for further instruction on how to connect a Bluetooth® device. Preparation ≥ Turn on the Bluetooth® feature of the device and place the device near the main unit. Bluetooth® pairing 1 Press [ -PAIRING] to select “BLUETOOTH”. ≥ If “PAIRING” is indicated on the display, go to step 3. 2 Press and hold [ -PAIRING] until “PAIRING” is indicated on the display.
SC-HTE200-SQTxxxx.book 14 ページ ２０１５年４月２７日 1 Press [ -PAIRING] to select “BLUETOOTH”. 2 Touch and hold your device on the NFC touch area of the main unit [ ]. (> 6) Do not move the Bluetooth® device until it beeps, displays a message or reacts in some way. Once the Bluetooth® device has reacted, move the device away from the main unit. ≥ When the registration and connection of the Bluetooth® device is complete, the name of the connected device is indicated on the display for a few seconds.
SC-HTE200-SQTxxxx.book 15 ページ ２０１５年４月２７日 Using this system 月曜日 午前１０時２分 Operations Preparation ∫ To adjust the volume of this system Press [j VOL i]. ≥ Turn on the TV and/or connected device. ≥ Volume range: 0 to 100 ∫ To mute the sound Press [MUTE]. ≥ While muting, “MUTE” is indicated on the display. ≥ To cancel, press the button again or adjust the volume. ≥ Muting is cancelled if the main unit is turned off. SETUP SOUND OK 1 Press [Í] to turn on the main unit. 2 Select the source.
SC-HTE200-SQTxxxx.book 16 ページ ２０１５年４月２７日 月曜日 午前１０時２分 3D sound Sound menu This system provides a feeling that the sound and the image are as one. ≥ To change the applied effect, refer to “Sound menu”. (> right) 1 Press [SOUND] repeatedly to select the sound effect. 2 Press [4] [3] repeatedly to select the desired setting and then press [OK]. e.g., Image of 3D sound field SOUND MODE 3D sound With this effect you can enjoy Dolby® Virtual a surround sound effect Speaker similar to 5.1ch.
H.BASS 3D CLR DIALOG 17 ページ ２０１５年４月２７日 Enhance the harmonic bass effect. ON OFF The 3D Clear Mode Dialog feature creates a sound field similar to the sound coming from a TV screen and makes dialogues clearer. ON: 3D Surround, Clear Mode Dialog and Dolby Virtual Speaker effect OFF: Dolby Virtual Speaker effect The setting is set back to “ON” every time you turn the main unit on. Sets the preferred audio channel mode when there are two audio modes received by this system.
SC-HTE200-SQTxxxx.book 18 ページ ２０１５年４月２７日 月曜日 午前１０時２分 Setup menu LINK MODE Change the transmission mode to prioritise transmission quality or sound quality. Make sure that the Bluetooth® device is not connected (“BLUETOOTH READY” is indicated on the display). MODE 1: Emphasis on connectivity. MODE 2: Emphasis on sound quality. VIERA LINK Turn on the VIERA Link function. ON OFF Select “OFF” when your HDAVI Control device does not work correctly with this system. ≥ ARC will be disabled.
ページ ２０１５年４月２７日 Linked operations with the TV (VIERA Link “HDAVI ControlTM”) What is VIERA Link “HDAVI Control”? VIERA Link “HDAVI Control” is a convenient function that offers linked operations of this system, and a Panasonic TV (VIERA) under “HDAVI Control”. You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details. Preparation 1 Confirm that the HDMI connection has been made.
SC-HTE200-SQTxxxx.book 20 ページ ２０１５年４月２７日 Troubleshooting 月曜日 午前１０時２分 Reference Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, consult your dealer for instructions. If this system does not operate as expected, returning the settings to the factory preset may solve the problem. To return to the factory preset.
ページ ２０１５年４月２７日 ≥ When the HDMI connections are changed, after a power failure or after the AC mains lead has been removed, VIERA Link operations may not function properly. jTurn on all the devices that are connected to the TV with an HDMI cable and then turn the TV on. jTurn off the VIERA Link settings of the TV and turn it on again. For details refer to the operating instructions for the TV.
SC-HTE200-SQTxxxx.book 22 ページ ２０１５年４月２７日 ≥ If the main unit is connected to a Panasonic TV and turned on using the remote control or the touch key on the main unit, sound might not be output from this system. In this case, turn the main unit on using the TV’s remote control. (> 19) ≥ If the connections are correct, there might be a problem with the cables. Redo the connections with different cables. ≥ Check the audio output settings on the connected device.
ページ ２０１５年４月２７日 About Bluetooth® Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission. ∫ Frequency band used This system uses the 2.4 GHz frequency band. ∫ Certification of this device ≥ This system conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary. ≥ The action below are punishable by law in some countries: jTaking apart or modifying the unit.
SC-HTE200-SQTxxxx.book 24 ページ ２０１５年４月２７日 Specifications RMS output power (non-simultaneous drive) Front ch (L, R ch) 50 W per channel (1 kHz, 10 %, 6 ≠) Subwoofer ch 100 W per channel (100 Hz, 10 %, 3 ≠) Total RMS output power 200 W TERMINAL SECTION AC 220 V to 240 V, 50 Hz Dimensions (WkHkD) 600 mmk63 mmk365 mm Mass Approx. 5.
SC-HTE200-SQTxxxx.book 25 ページ ２０１５年４月２７日 月曜日 午前１０時２分 Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste.
SC-HTE200-SQTxxxx.book 26 ページ ２０１５年４月２７日 月曜日 午前１０時２分 Safety information for customers in the EU English Declaration of Conformity (DoC) Lietuviškai Hereby, “Panasonic Corporation” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Customers can download a copy of the original DoC to our R&TTE products from our DoC server: http://www.doc.panasonic.
SC-HTE200-SQTxxxx.book 27 ページ ２０１５年４月２７日 月曜日 午前１０時２分 Eesti keel Român Vastavusdeklaratsioon (DoC) Declaraţie de Conformitate (DoC) “Panasonic Corporation” kinnitab käesolevaga, et see toode on vastavuses põhiliste nõuete ja muude direktiivi 1999/5/EÜ asjakohaste sätetega. Kliendid saavad koopia meie R&TTE toodetele kehtiva originaalvastavusdeklaratsiooni koopia alla laadida meie DoCserverist: http://www.doc.panasonic.
SC-HTE200-SQTxxxx.book 42 ページ ２０１５年４月２７日 月曜日 午前１０時２分 For the United Kingdom and Ireland customers Sales and Support Information Customer Communications Centre ≥ For customers within the UK: 0344 844 3899 ≥ For customers within Ireland: 01 289 8333 ≥ Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays). ≥ For further support on your product, please visit our website: www.panasonic.co.
