Operation Manual

21
RQTX1111
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
You can attach all of the speakers (except subwoofer) to a wall.
≥ The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 kg per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers.
1 Drive a screw (not included) into the wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).
≥ Never use alcohol, paint thinner or benzine to clean this unit.
≥ Before using chemically treated cloth, carefully read the instructions that
came with the cloth.
Do not use commercially available lens cleaners as they may cause
malfunction. Cleaning of the lens is generally not necessary although
this depends on the operating environment.
Speaker installation option
Attaching to a wall
[PT580] Front speaker
[PT880] Front and surround speakers
Attach to a wall without the base and the stand
At least 30 mm
‰7.0 mm to 9.4 mm
Wall or pillar
3 mm to 5 mm
‰4.0 mm
[PT580] Surround speaker
100 mm
Center speaker
72 mm
348.5 mm
DO
NOT
DO
e.g.
In this position,
the speaker will
likely fall if moved
to the left or right.
Move the
speaker so that
the screw is in
this position.
Reattaching the speaker cable
Maintenance
Clean this unit with a soft, dry cloth
Before moving the unit, ensure the disc tray is empty. Failure to
do so will risk severely damaging the disc and the unit.
Insert the cable
from the bottom.
Pull out the cable
through the hole.
Leave about
120 mm.
21
Getting StartedPlaying DiscsOther Operations
SC-PT580-880EP-RQTX1111-R_eng.book Page 21 Monday, December 28, 2009 5:29 PM