Before using . Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. These operating instructions ars applicable to tha following system. These operating instructions, however, fundamentally explain the operation of system 8C-AK27.
TRV Y] Supplied 806ES80TIRS oo converse & Suggestions fof. safety .. 8 ‘auction for AC Mains Lead oncerning:the:remote control .. Battery installation .. Corset method of use Placement of speakers connections .. Basic connections (for supplied accessorizing) Optional antenna connections . Exterminate unit connection ant panel Controls turning the demo function off economy mode.
Before using . ) ROTARY (For United Kingdom) ("EB” area code medal only) For your safety, please read the following text carefully. This appliance is supplied with a molded thees pin main plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by PASTA or BSI 1o BS1362. Check for the PASTA mark @ or the BSI mark ¥ on the body of the fuse.
parting the batteries in the correct polarities UM-3 @ R8, Aa, UM-G Po Battery installation [ Use of batteries mix old and new batteries, or batteries of different types {manganese and alkaline, etc.). & Never subject batteries to excessive heat or flame; do not attempt to dissembler thee; and be sure they are not shewn-circuited. * If the ram ate control is not 1o be used for a long period of time, remove e batteries and stirs them in a cool, dark place.
Before using . RO For Australia and New Zealand For United Kingdom [} Adhesive tape s FM indoor antenna [ Adhesive tape e FM Indoor antenna Anterior holder For Australia and New Zealand AM loop antenna For United Kingdom AM loop | antenna | Back Basic connections (for supplied accessories) & Plug the AC power cord into a household AC outset only after ali other connections have been made.
For Australia and New Zealand 7 s FIA OUTGOES neaten —am_.
Before using . No. Name Ref. page @) Economy button (ECO) 3y AC supply indicator (AC IN) This indicator lights when the unit is connects to the AC mains supply. [OW For Australia and New Zealand Standby/on switch POWER) Standby/on switch (O/1) Crass to switch the uni from on to standby mode or vice versa [n standby mode, the unit is still consuming & small amount of power. Disc tray Disc select buttons and Indicators {MISC 1-DISC manager button (CD MANAGER) .
Main unit {continued) No. Name @ Deck 1 cassette holder & 3D Ale Q button Sound equalizer control/indicators {SOUND EQ) @ Headphone Jack (PHONES) .. @ Deck 2 cassette holder . Before using Remote control B ] Buttons only) and @ have the same functions as the corresponding buttons on the map unit No. Name Ref. page Numeric buttons Program button (PROGRAM Cancel button (CANCEL) g a, PP buttons (A, D) Muting bunion (MUTING /v button Sleep button (SLEEP) Disc button (DISC} ..
For Australia and New Zealand row En For others clock hes not hen set, & demonstration of the display is shown when the unit is switched to standby. This function i set 10 on at the time of purchase. Tum this function off to get the most from the economy mode {see below}. Press and hood until “NO DEMO” is displayed. The display changes each tine the button s held down.
This is a 24-hour display clock. This example in the figure shows how to set the time for 16:28 (4:25 n Press [/1] to switch on the system, E Press [CLOCK/TIMER] to select “CLOCK”. Every time you press the button: CLOG ~» SPLAY — REC £ Previous display Before using . B (within 7 seconds or so) Press show the present time. For others E’ Press [CLOCK/TIMER] to finish setting the time. The display wil rectum to whatever was displayed before you set the time.
Listening operations stations can be get in each band with the automatic or unreal memory pres siting. * if broadcast frequencies are preset in the memory, you can easily tune in any of these frequencies from the system o remote control unit, & You can preset just those stations you fiche. {Ses “Presetting only your favorite stations” below.) Press [TUNER BAND] to select band. The system wit come on automatically. Every time you press the button: FM «» AM Press [TUNE MODE] to select "MANUAL".
“ Press [TUNER BAND] to select band. The system will come on aromatically. Every dime you press the button: Press [TUNE MODE] to select “PRESET” or “MANUAL”. Every tire you press the bunion: MANUAL < PRESET. PRESET: For preset stations MANUAL: For non-preset stations E’ Press select the desired broadcast. “STEREO” lights when an FM stereo broadcast is being received. “TUNED lights when you precisely duns in & broadcast station, .s.
I tannest Duse number Nuremberg of tracks Label must face upward. Loading and: checking CDs Always stop the hanger before loading or changing CDs. You cannot change CDs while a disc is playing. How to load €Ds Press [CD]. o The system will some on automatically. Press [4 OPEN/CLOSE 1] ~ [& OPEN/CLOSE whichever you want. The tray will open. Set CD in the tray. Note the lighted disc indicator{see below) for the disc you are at, and press its corresponding button [& OPEN/CLOSE 1] [# OPEN/CLOSE 5].
S e Elapsed playing time {Of current track number) Sequential play Press [CD]. 0 The system will come on automatically. E inert CD in the tray. {For details, see page 14.) E Press [DISC 1] [DISC 5] 1o select the disc you want, (it the desired CD is indicated on the display pearl, the same appellation can be accomplished by passing A1} Piaf wil start from the first track on the selected disc, and will continue until the last track of the final disc (see below) is played. m Adjust the velum level.
Listening operations Press [CD]. o E Press [DISC). B a (within 10 seconds or so} Press sleet the disc you want, Press the numeric bunion to select the desired track number. The CD will be played from the selected track to the last frack of the final disc {page 15). To select b two-sigh track Tress [210] and then the two numbers you want within 10 seconds or so. For example Track no. 20: [2101 Track no. 35: [210] Repeat play by remote control only Press [REPEAT] before or during play.
Specified track number Program order Indicates < program made Program play You san program up to 24 tracks. n Press [CD]. Ensure CD is stopped. Press [PROGRAM]. Press [DISC]. Press select the disc you want. Press the numeric button to select the desired track. Repeat steps through until you have programmed all the tracks you want, fl {within 10 secants or so) Press VAL Piaf will start in the programmed sequence. o cancel program play mode Press [PROGRAM] in the stop mode.