Operating Instructions - Language - English

27
RQT6131
Reference
Specifications
SPEAKER SECTION
Type 2 way speaker system
Speaker(s)
Woofer 12 cm cone type
Tweeter 6 cm cone type
Impedance
HIGH 6 Ω
LOW 6 Ω
Input power
HIGH 80 W (Music)
LOW 80 W (Music)
Output sound pressure level
85 dB/W (1.0 m)
Cross over frequency 3.5 kHz
Frequency range 45 Hz–22 kHz (–16 dB)
55 Hz–20 kHz (–10 dB)
Dimensions (WxHxD) 210 x 315 x 228 mm
Mass 2.6 kg
GENERAL
Power supply
(For United Kingdom, Australia
and New Zealand)
AC 230-240 V, 50 Hz
(For Continental Europe, Russia and
Ukraine)
AC 230 V, 50 Hz
Power consumption
(For Europe) 165 W
(For Australia and New Zealand) 155 W
120 W
Dimensions (WxHxD) 250 x 315 x 345 mm
Mass
(For Europe) 7.3 kg
(For Australia and New Zealand) 7.0 kg
6.7 kg
Power consumption in standby mode:
Approx. 0.49 W
Notes
1. Specifications are subject to change
without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by
the digital spectrum analyzer.
3. The labels “HIGH” and “LOW” on the
rear of the speakers refer to High
frequency and Low frequency.
AMPLIFIER SECTION
(For Europe)
RMS Power output
10% Total harmonic distortion
1kHz, both channels driven
(Low channel) 52 W per channel (6 Ω)
10 kHz, both channels driven
(High channel) 48 W per channel (6 Ω)
Total Bi-Amp power
100 W per channel
(For Australia and New Zealand)
RMS Power output
10% Total harmonic distortion
1 kHz, both channels driven
(Low channel) 42 W per channel (6 Ω)
10 kHz, both channels driven
(High channel) 38 W per channel (6 Ω)
Total Bi-Amp power 80 W per channel
Input sensitivity
AUX 250 mV
Input Impedance
AUX 13.3 kΩ
AMPLIFIER SECTION
RMS Power output
10% Total harmonic distortion
1 kHz, both channels driven
(Low channel) 36 W per channel (6 Ω)
10 kHz, both channels driven
(High channel) 34 W per channel (6 Ω)
Total Bi-Amp power 70 W per channel
Input sensitivity
AUX 250 mV
Input Impedance
AUX 13.3 kΩ
FM TUNER SECTION
Frequency range
87.50 – 108.00 MHz (50 kHz steps)
(For Europe)
Sensitivity 1.8 µV (IHF)
S/N 26 dB 1.5 µV
(For Australia and New Zealand)
Sensitivity 2.5 µV (IHF)
S/N 26 dB 2.2 µV
Antenna terminal(s) 75 Ω (unbalanced)
AM TUNER SECTION
Frequency range
522 – 1629 kHz (9 kHz steps)
Sensitivity
S/N 20 dB (at 999 kHz) 560 µV/m
CASSETTE DECK SECTION
Track system 4 track, 2 channel
Heads
Record/playback Solid permalloy head
Erasure Double gap ferrite head
Motor DC servo motor
Recording system AC bias 100 kHz
Erasing system AC erase 100 kHz
Tape speed 4.8 cm/s
Overall frequency response
(+3 dB, –6 dB at DECK OUT)
NORMAL (TYPE I) 35 Hz – 14 kHz
S/N 50 dB (A weighted)
Wow and flutter 0.18% (WRMS)
Fast forward and rewind time
Approx. 120 seconds with
C-60 cassette tape
CD SECTION
Sampling frequency 44.1 kHz
Decoding 16 bit linear
Pickup
Beam source/wavelength
Semiconductor laser/780 nm
(For Norge)
Bølgelengde 780 nm
Laser-styrke Ingen farlig strålning
sendes ut
Number of channels Stereo
Frequency response
20 Hz–20 kHz (+1, –2 dB)
Wow and flutter Below measurable limit
Digital filter 8 fs
D/A converter MASH (1 bit DAC)
SPEAKER SECTION SB-AK300
Type 3 way speaker system
Speaker(s)
Woofer 12 cm cone type
Tweeter 6 cm cone type
Super tweeter Piezo type
Impedance
HIGH 6 Ω
LOW 6 Ω
Input power
HIGH 100 W (Music)
LOW 100 W (Music)
Output sound pressure level
85 dB/W (1.0 m)
Cross over frequency 3.5 kHz
Frequency range 45 Hz–22 kHz (–16 dB)
55 Hz–20 kHz (–10 dB)
Dimensions (WxHxD) 210 x 315 x 251 mm
Mass 2.8 kg
SC-AK300
SC-AK200
SB-AK300
SB-AK200
SC-AK300
SC-AK200
SC-AK300
SC-AK200