Operating Instructions

- 13 -
≥ The following steps are based on a smartphone.
≥ Do not connect a LAN cable. Doing so will disable the Wi-Fi
®
function.
1 Turn this unit on.
2 Go to Wi-Fi
®
settings on the device.
≥ Proceed to the next step after the network indicator changes from blinking in
blue and red to blinking slowly in blue
§
.
§ The blinking in blue starts after approximately 1 minute. If the blinking in
blue does not start, perform a network reset. (l 16)
Using an Internet browser
Settings Wi-Fi Settings