Operation Manual
14
RQT0A22
Listening to DAB+
Preparation
≥ Make sure that the DAB antenna is connected. (l 5)
≥ Turn the unit on.
≥ Press [RADIO/EXT-IN] repeatedly to select “DAB+”.
To listen to DAB+ broadcasts, the available stations
need to be memorised in this unit.
≥ This unit will automatically start the “DAB AUTO
SCAN” and memorise the stations that are available
in your region if the memory is empty.
≥ “SCAN FAILED” is displayed when the auto scan is
unsuccessful. Locate the position with the best reception
(l 15, “To verify or improve the signal reception quality”) and
then re-scan DAB+ stations.
∫ To re-scan DAB+ stations
When new stations are added or when the antenna
has been moved, reperform the auto scan.
1 Press [PLAY MENU] to select “AUTOSCAN” and
then press [OK].
2 While “START ?” is flashing,
Press [OK].
≥ When updating the memory with the auto scan, preset
stations will be erased. Preset them again (l right).
Preparation*
1 Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
2 Press [3, 4] to select “STATION” and then press
[OK].
1 Press [RADIO/EXT-IN] repeatedly to select
“DAB+”.
2 Press [:/6] or [5/9] to select the
station.
You can preset up to 20 DAB+ stations.
1 While listening to a DAB broadcast
Press [OK].
2 Press [3, 4] to select the desired preset channel
number and then press [OK].
≥ You cannot preset stations when the station is not
broadcasting or when the secondary service is selected.
≥ The station occupying a channel is erased if another station
is preset in that channel.
∫ Listening to preset DAB+ stations
Preparation*
1 Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
2 Press [3, 4] to select “PRESET” and then press
[OK].
1 Press [RADIO/EXT-IN] repeatedly to select
“DAB+”.
2 Press [:/6] or [5/9] to select the
station.
≥ To select by preset, make sure that stations have already
been preset manually.
≥ To add additional preset stations, select the station using the
method mentioned in “Listening to the memorised stations”
(l left).
Some DAB+ stations provide a secondary service as
well as the primary service. If the station you are
listening to is providing secondary service, the
secondary service indicator “ ” lights up.
1
While the secondary service indicator “ ” lights up.
Press [PLAY MENU] repeatedly to select “DAB
SECONDARY”.
2 Press [3, 4] to select the secondary service and
press [OK].
≥ The setting will go back to primary service when changes are
made (e.g. the station is changed).
* The “TUNEMODE” setting is memorised until it is changed.
Memorising stations
Listening to the memorised stations
Presetting DAB+ stations
Listening to the secondary service
SC-ALL5CD-EGEBGN~RQT0A22.book 14 ページ 2015年4月23日 木曜日 午後4時44分