Operation Manual

- 18 -
1 Disconnect the AC power supply cord (AC mains lead).
2 Connect this unit to a broadband router, etc. using a LAN cable.
3 Connect the AC power supply cord (AC mains lead) to this unit,
and turn the unit on.
When the connection is established, the network indicator (blue) lights up.
Use category 5 or above straight LAN cables (STP) when connecting to
peripheral devices.
The LAN cable must be connected or disconnected while the AC power supply
cord (AC mains lead) is disconnected.
Inserting any cable other than a LAN cable in the LAN port can damage the
unit.
If the LAN cable is disconnected, the network-related settings (l 19) will be
initialized. In that case, make the settings again.
When a LAN cable is connected, the Wi-Fi function will be disabled.
Power consumption will be reduced when the unit is turned on or is in
standby mode.
Using a LAN cable
Broadband router, etc.
e.g.,
LAN cable (not supplied)