Panasonic Self Help Guides SC-BT100 5.1 & 7.1 Channel Surround Sound Setup DOC: UK/CCC/SH/SCBT100 V1.
Setting up a 5.1 or 7.1 Speaker System The SC-BT100 is supplied as a 3.1 surround sound system. Either one or two sets of SH-FX67 wireless speakers can be added to upgrade the system to become a 5.1 or .7.1 surround sound system.
5.1 / 7.1 Speaker Setup Continued Select Press You will see Sound Speakers Arrow Down to rear speakers section Arrow Down to Activate the rear speakers At this point you have activated one set of rear speakers for a 5.1 surround sound system. You must save your settings before your exit the speaker setup menu. Please follow the instructions for saving the settings on the next page. If you have purchased a second set of rear speakers to create a 7.
7.1 Speaker Setup Continued Select Press You will see Arrow Down to rear speakers section Arrow Down to Activate the rear speakers Saving the Settings Having activated the additional 5.1 or 7.1 speakers in the speaker setup menu, the settings must be saved before exiting the menu.
Pairing the additional Speaker System (s) The second stage to upgrading the SC-BT100 to become a 5.1 or 7.1 surround sound system is to pair the additional set or sets of wireless surround speakers (SH-FX67). Each SH-FX67 wireless speaker system comprises of: 2 Speakers 1 SH-FX67T Digital Transmitter Card 1 SE-FX67 Wireless Receiver •One Wireless Speaker system can be added to the SC-BT100 to create a 5.1 surround sound system. •Two Wireless Speaker systems can be added to the SC-BT100 to create a 7.
When using a single Wireless Receiver in a 5.1 channel surround sound system as shown in the illustration, ensure that the surround selector switch, found on the back of the receiver, is set to the Centre position When using a pair of Wireless Receivers in a 7.
Pairing Instructions (for 7.1 Channel Surround Sound only) It should not be necessary to pair the Digital Transmitter to the Wireless Receiver unit when a single receiver is being used (5.1 channel surround system) as they will have been paired at the factory. When creating a 7.1 channel surround sound system please follow the instructions below: 1. Select one Wireless Receiver and the Digital Transmitter card supplied with it and place it in position for the left hand channels. 2.