Operating Instructions

36
VQT3Z99
Setup menu
Change the unit’s settings if necessary. The
settings remain intact even if you switch the unit
to standby.
Some items in the Setup menu are common to
the Option menu. You can get the same effect
with both menus.
About Multi User Mode
: Settings of the items with this indication are
saved by the respective users registered in the
HOME menu.
Please refer to page 23 for details about user
registration and switching.
1 Press [HOME].
2 Press [3, 4, 2, 1] to select “Others” and
press [OK].
3 Press [2, 1] to select “Setup” and press
[OK].
4 Select an item and change the settings.
To exit the screen
Press [HOME].
∫ Picture Mode (> 34)
∫ Picture Adjustment (> 34)
∫ Chroma Process (> 34)
∫ Detail Clarity (> 34)
∫ Super Resolution (> 34)
∫ HDMI Output
Press [OK] to show the following settings:
¾ HDMI Video Format
The items supported by the connected devices are
indicated on the screen as “
¢ ”. When any item
without “
¢ ” is selected, the images may be distorted.
≥ If “Automatic” is selected, the best suited
output resolution to the connected television
is automatically selected.
≥ To enjoy high-definition video up-converted to
1080p, you need to connect the unit directly
to 1080p compatible HDTV (High Definition
Television). If this unit is connected to an
HDTV through other equipment, the other
equipment must also be 1080p compatible.
¾ 24p Output
When this unit is connected to a TV supporting 1080/
24p output using an HDMI cable, movies and other
material recorded at 24p are output at 24p.
≥ When playing DVD-Video, set to “On” and then
set “24p” in “Picture Settings” (
> 34) to “On”.
≥ When BD-Video images other than 24p are
played, images are output at 60p.
≥ 24p: A progressive image recorded at a rate
of 24 frames per second (motion-picture film).
Many BD-Video movie contents are recorded
in 24 frames/second in accordance with the
film materials.
¾ HDMI Colour Mode
This setting is for selecting colour-space
conversion of the image signal when the unit is
connected using an HDMI cable.
¾ Deep Colour Output
This setting is for selecting whether to use Deep
Colour output when a television that supports
Deep Colour is connected.
¾ Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
¾ [BTT282] HDMI Standby Pass-Through
Even if this unit is in standby mode, a device connected
with this unit can output videos and sound to the TV.
Moreover, you can switch the HDMI input terminal
by pressing [EXT-IN] on the remote control.
≥ Sound will not be output from this unit’s speakers.
Picture
OK
RETURN
HDMI Output
Super Resolution
Detail Clarity
Chroma Process
Picture Adjustment
Picture Mode
Seamless Play
Still Mode
NTSC Contents Output
On
Automatic
Advanced
Normal
Setup
System
Ratings
Network
Language
3D
Sound
Picture
SC-BTT282&182EB-VQTVQT3Z99_mst.book 36 ページ ２０１２年２月８日 水曜日 午前１１時８分