Operating Instructions

40
VQT3Z99
When connected to a 16:9 widescreen
television and playing 4:3 ratio image:
¾ TV System
Perform the setup so it matches the TV System
of the connected TV.
≥ [BTT282] When NTSC contents are played,
they are outputted in the signal format
specified in the “NTSC Contents Output”,
irrespective of the settings here. (> 37)
¾ Screen Saver Function
This is to prevent burn-in on the screen.
≥ When this is set to “On”:
If a list of playback content is displayed and
there is no operation for 10 minutes or more,
the screen switches to HOME menu
automatically.
≥ While playing and pausing, etc., this function
is not available.
¾ On-Screen Messages
Choose whether to show status messages
automatically.
¾ VIERA Link
Set to use “HDAVI Control” function when
connected via HDMI cable to a device that
supports “HDAVI Control”.
≥ Select “Off” when you do not want to use
“HDAVI Control”.
¾ Power Off Link
Select the desired power off link setting of this
unit for VIERA Link operation (> 28). (This
works depending on the settings of the
connected VIERA Link “HDAVI Control”
compatible equipment.)
Video/Audio
When the TV is turned off, this unit will turn off
automatically.
Video
When playing back audio only content, the
unit will not turn off automatically.
∫ Unit Settings
Press [OK] to show the following settings:
¾ Front Panel Display
Changes the brightness of the unit’s display.
≥ If “Automatic” is selected, the display is set to
bright and only dimmed during playback.
¾ Edit User Information
Change the user information registered in the
HOME menu.
∫ Quick Start
Speed of startup from standby mode is increased.
≥ When set to “On”, the internal control unit will be
powered and the idle power consumption will
increase so compared to when set to “Off”.
(About the power consumption > 48)
∫ Remote Control
Change the remote control code if other
Panasonic products react to this remote control.
∫ Firmware Update (> 20)
Press [OK] to show the following settings:
¾ Automatic Update Check
When this equipment remains connected to the Internet,
it will check for the latest firmware version when it is
turned on and you can update it if necessary.
¾ Update Now
You can update the firmware manually if a
firmware update is available.
∫ System Information
Press [OK] to show the following settings:
¾ Software Licence
Information about the software used by this unit
is displayed.
¾ Firmware Version Information
4:3
The sides are cut
off so the picture
fills the screen.
When playing
BD-Video, video is output as “4:3
Letterbox”.
4:3
Letterbox
Black bands
appear at the top
and bottom of the
picture.
16:9
Video is displayed as a 4:3 ratio
image in the centre of the screen.
Display firmware version of this unit and
wireless LAN module.
SC-BTT282&182EB-VQTVQT3Z99_mst.book 40 ページ ２０１２年２月８日 水曜日 午前１１時８分