Operating Instructions
Advanced
operations
41
VQT3Z99
∫ DivX Registration
You need this registration code to purchase and
play DivX Video-on-Demand (VOD) content.
∫ Default Settings
This returns all values in the Setup menu and the
Option menu to the default settings, except for
some settings of network, ratings, remote control
code, language, etc.
∫ Adjusting speaker level
(Effective when playing multi-channel audio)
1 Select “Test” and press [OK].
A test signal is output.
2 While listening to the test signal
Press [3, 4] to adjust the volume of
subwoofer ( ).
The volume can be adjusted between r6 dB
to s6 dB.
3 Press [OK].
The test signal stops.
A Te st
To finish the speaker setting
Press [3, 4, 2, 1] to select “Complete” and
press [OK].
Enjoying sound effects
from all speakers
For more details on each setting, refer to “Sound
Settings” on the Option menu. (> 34)
1 Press [SURROUND].
2 While the mode is displayed
Press [3, 4] to select the desired setting.
(
>
34
)
∫ Adjusting speaker level during play
1 Press [CH SELECT] to activate the speaker
setting mode.
2 Press [CH SELECT] several times to select
the speaker.
≥ Press [2, 1] to adjust the balance of the
front speakers.
3 Press [3] (increase) or [4] (decrease) to
adjust the speaker level for subwoofer.
s6 dB to r6 dB
1 Press [SOUND].
2 Press [3, 4] to select “2CH SOURCE” or
“ALL SOURCE”, and then press [OK].
e.g.,
3 While the selected mode is displayed
Press [3, 4] to select the desired setting and
press [OK].
Repeat this procedure if necessary. (> 34)
≥ The sound effects/modes may not be available or have no
effect with some sources.
≥ You may experience a reduction in sound quality when
these sound effects/modes are used with some sources. If
this occurs, turn the sound effects/modes off.
Speaker settings
dB
0
Complete
Test
RL
0
dB
SW
Surround Effects
Sound Effects
SC-BTT282&182EB-VQTVQT3Z99_mst.book 41 ページ 2012年2月8日 水曜日 午前11時8分