Operating Instructions

13
Getting started
VQT4A16
STEP 2: Preparing the speakers
[BTT195]
1 Attach the stand to the base. 2 Tighten the 3 screws (supplied) securely.
3 Attach the speaker.
4 Tighten the screw (supplied) securely.

≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
Attach the speaker cable sticker (supplied) and connect the speaker cables to the speakers.
e.g., Surround speaker
Assembling the front speakers
Thread the speaker
cable through the
base.
Slide the speaker cable into the
groove.
Leave the
space of
about 80 mm.
Connecting the speaker cables
SURROUND
Lch

Push
r: White
s: Blue line
Speaker cable sticker (supplied)
Connector
Speaker indication
Speaker cable sticker Connector
1 FRONT Lch 1 WHITE
2 FRONT Rch 2 RED
3 SURROUND Lch 3 BLUE
4 SURROUND Rch 4 GREY
5 CENTER 5 GREEN
6 SUBWOOFER 6 PURPLE
SC-BTT195&190EBEP-VQT4A16_mst.book 13 ページ ２０１２年１月１２日 木曜日 午前９時５０分