Operating Instructions

48
VQT4A16
Specifications
* The impedance of all the speakers is 3 ≠.
* This unit supports “HDAVI Control 5” function.
Specifications are subject to change without notice.
GENERAL
Power consumption: 80 W
Power consumption in
standby mode: Approx. 0.1 W
Power supply: AC 220 V to 240 V, 50 Hz
Dimensions (WkHkD):
430 mm k 47 mm k 263 mm
Mass: Approx. 2.4 kg
Operating temperature
range: 0 oC to 40 oC
Operating humidity range: 35 % to 80 % RH
(no condensation)
AMPLIFIER SECTION
RMS TTL POWER OUTPUT: 1000 W
1 kHz, 10 % total harmonic distortion
FRONT: 160 W per ch (3 ≠)
CENTRE: 160 W per ch (3 ≠)
SURROUND: 160 W per ch (3 ≠)
100 Hz, 10 % total harmonic distortion
SUBWOOFER: 200 W per ch (3 ≠)
Audio Input
AUX k 1
Digital Audio Input
Optical k 1
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Audio Format: PCM, Dolby Digital, DTS
FM TUNER SECTION
Frequency range: 87.50 MHz to 108.00 MHz (50 kHz
step)
Antenna terminals: 75 ≠ (unbalanced)
SPEAKER SECTION
Woofer
CONE TYPE
(cm)
Full range
CONE TYPE
(cm)
Super
tweeter
[BTT195] [BTT190]
Front j
6.5
j
Centre j
6.5
Piezo type
Surround j
6.5
j
Subwoofer
16
jj
Dimensions
(W (mm) k H (mm) k D (mm))
Mass
(Approx. kg)
[BTT195]
Front 292 k1185 k292 2.42
Centre 280 k84 k78 0.53
Surround 80 k139 k71 0.37
Subwoofer 145 k289.5 k258 3.0
[BTT190]
Front 80 k139 k71 0.37
Centre 280 k84 k78 0.53
Surround 80 k139 k71 0.37
Subwoofer 145 k289.5 k258 3.0
TERMINAL SECTION
USB slot: USB2.0: 2 system
SD card slot: Connector: 1 system
Ethernet: 10BASE-T/100BASE-TX 1 system
VIDEO SECTION
Signal system: PAL/NTSC
HDMI AV output*
Output connector: Type A (19 pin)
LASER Specification
Class 1 LASER Product
Wave length:
790 nm (CDs)/660 nm (DVDs)/405 nm (BDs)
Laser power: No hazardous radiation is emitted
with the safety protection
SC-BTT195&190EBEP-VQT4A16_mst.book 48 ページ ２０１２年１月１２日 木曜日 午前９時５０分