Operating Instructions

18
VQT3M06
∫ When the connecting devices have an HDMI terminal
[BTT775] [BTT770] [BTT370]
A HDMI cable (not supplied)
B Set Top Box (Cable/Satellite), etc.
C Other devices (Video game, etc.)
≥ Make sure that the HDMI cable connection is made to enjoy
the videos from the Set Top Box, etc. Furthermore, select
“HDMI Input1” or “HDMI Input2” as a source.
HDMI Standby Pass-Through (> 44)
Even if this unit is in standby mode, a device connected with
this unit can output videos and sound to the TV.
Moreover, you can switch the HDMI input terminal by pressing
[EXT-IN] on the remote control.
≥ Sound will not be output from this unit’s speakers.
∫ When the connecting devices do not have an HDMI terminal
A Refer to the operating instructions of the
respective devices for the optimal connections.
B Optical digital audio cable (not supplied)
C Set Top Box (Cable/Satellite), etc.
[BTT775[for[Australia[and[New[Zealand]
Connection with Set Top Box, etc.
AV IN
(ARC)
AV O U T
AV O U T


 

HDMI IN 2
HDMI IN 1(CABLE/SAT)
HDMI AV OUT
(ARC)
TV
e.g.,
OPTICAL
OUT



OPTICAL
TV
e.g.,
To enjoy TV audio from this home theatre
system’s speakers:
1 Connect the STB and the main unit with the
Optical digital audio cable (not supplied).
2 Select “DIGITAL IN” or “D-IN” as a source
(> 25).
Digital transmitter connection
Insert fully until you
hear a click.
Do not insert or remove while the home theatre unit is on.
Make sure that the digital transmitter is fully inserted.
If the digital transmitter is not fully inserted, the sound may not
be available from the surround speakers.
DO
DO NOT
SCBTT775_770_370_270EBEPGN_VQT3M06.book 18 ページ ２０１１年１月１８日 火曜日 午後６時１４分