Operating Instructions

15
Getting started
VQT4Z42

≥ Use an FM outdoor antenna if radio reception is poor.
∫ When the connecting devices have an HDMI terminal

HDMI standby pass-through
Even if this system is in standby mode, the audio and/or video signal from the device connected to the HDMI1 IN (CABLE/SAT)
or HDMI2 IN terminal will be sent to the TV connected to the HDMI AV OUT terminal (the sound will not be output from this
system). Even while the unit is in the standby mode, you can change the input signal HDMI1 IN (CABLE/SAT) or HDMI2 IN by
pressing [EXT-IN] on the remote control.
∫ When the connecting devices do not have an HDMI terminal
FM antenna connection
75
Affix this end of the antenna to a wall or pillar where
the reception is best.
FM indoor antenna (supplied)
Other device connection
AV IN
(ARC)
AV O U T
AV O U T
e.g.,
Set Top Box, etc.
Video game, etc.
HDMI cable
(not supplied)
HDMI cable
(not supplied)
OPTICAL
OUT
e.g.,
Optical digital audio cable
(not supplied)
Set Top Box, etc.
SC-BTT880EB-VQT4Z42_mst.book 15 ページ ２０１３年３月２１日 木曜日 午前９時４９分