Operating Instructions

20
VQT4Z42
Inserting or removing
media
≥ When inserting a media item, ensure that it is
facing the right way up.
≥ When removing the SD card, press the centre
of the card and pull it straight out.
≥ If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
≥ Use the front USB port when you connect a
iPod/iPhone, USB memory or a USB HDD.
The USB port on the rear panel is only for the
Communication Camera.
Enjoying TV with unit’s
speakers
1 Connect the TV and the main unit. (> 14)
2 Press [EXT-IN] several times to select the
appropriate external input mode. (> 21)
≥ Reduce the volume on the TV to its
minimum, and then adjust the volume of the
main unit.
Press [AUDIO] several times to select the
audio. (M1, M2)
≥ Set “PCM-Fix” (> 36) to “Off”.
≥ Only works with Dolby Dual Mono.

≥ You cannot change the audio type when the TV is
connected to this unit via the AUX terminal.
SD CARD
VOL
OPEN/CLOSE
*
* (For details > 26)
Selecting the type of audio
SC-BTT880EB-VQT4Z42_mst.book 20 ページ ２０１３年３月２１日 木曜日 午前９時４９分