Operating Instructions

13
(Continued)
Read first
Installation
Installation
• Turn off all the equipment before connection and
read the appropriate operating instructions. Be
sure to raise this unit when moving, and do not
drag this unit.
• Do not carry this unit by holding the subwoofer of
the bottom of this unit.
Notes on the speakers
• These speakers do not have magnetic shielding.
Do not place them near TV, PC or other equipment
easily influenced by magnetism.
• Playing music at high volumes for a long period
can cause damage to the system and shorten the
life of the system.
• Decrease the volume in the following conditions to
prevent damage.
 When playing distorted sound
 When adjusting the sound quality
 When turning on/off this unit
For optimum sound effects
The quality and volume of the bass sound, sound
localisation performance, sound ambience, etc. will
change depending on the installation location of
this unit, listening position, room conditions, and
other factors. Refer to the information below when
installing this unit.
Determining the installation location
• Place this unit on a flat safe surface.
• To minimise the gap in audio quality between left
and right, install this unit in the way that acoustic
conditions (reflection and absorption of sound)
around this unit can be the same.
Adjusting the distances between this unit and
the wall
• If you install this unit close to a wall or a corner,
the bass sound will be more powerful, however,
if the unit is too close to it, sound localisation
performance and sound ambience may
deteriorate. If this occurs, adjust the distance
between this unit and the wall.