DVD System Operating Instructions Model No. SC-DT310 Model No. TV VCR AUX EXT AV SYSTEM SLEEP TV/AV TUNER BAND Region number supported by this player DVD CD DOUBLE RE-MASTER 1 2 3 GROUP 4 5 6 VOLUME REPEAT/ MIX 2CH 7 8 PLAY MODE/ P.
Dear customer System Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Unless otherwise indicated, illustrations in these operating instructions are of the system for the United Kingdom, Continental Europe and Russia.
Table of contents Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts. ∏ 1 Remote control ∏ 2 Batteries (For the United Kingdom, for remote control Continental Europe and Russia : EUR7623010) (For others: EUR7623020) ∏ 1 AC mains lead [For\the\United\Kingdom] [For\Australia\and\N.Z.
Caution for AC Mains Lead (For United Kingdom) (“EB” area code model only) Getting started For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse.
Disc information ∫ Discs that can be played Disc type Logo Indication used in instructions ∫ DVD-R discs Panasonic DVD-R recorded and finalized§ on a Panasonic DVD video recorder are played as DVD-Video on this unit. [RAM] DVD-RAM A process that allows play on compatible equipment. § [DVD-A] DVD-Audio Type ≥Non-cartridge discs ≥Discs that can be removed from their cartridges (TYPE 2 and 4) Capacity ≥12 cm 9.4 GB (double-sided) and 4.7 GB (singlesided) ≥8 cm 2.
Simple setup 1 STEP Plug in the AC mains lead after making all connections. Locating CENTER Simple setup SURROUND(R) FRONT(R) SUBWOOFER FRONT(L) SURROUND(L) Main unit AV control receiver VOLUME To raise the angle e.g.) DVD/CD Player SA-DT310 Í/ I SELECT DIGITAL INPUT AV CONTROL RECEIVER DOWN UP Ë SL-DT310 SL-DT310 DOUBLE RE-MASTER The size of the front speakers and surround speakers are the same respectively.
STEP 2 2 Speaker cables (4 wires, 4 m) 2 Speaker cables (2 wires, 4 m) 2 Speaker cables (2 wires, 10 m) Speakers Sheet of speaker-cable stickers 1 Attach the stickers to the speaker cables. Attach the speaker-cable stickers to make connection easier. A noise filter comes attached with the speaker cables to FRONT L, R (4 m) prevent undue influence to other equipment. Do not remove the noise filter from the speaker cable. e.g.
STEP 3 Television Video cable ∫ Connecting a television with a VIDEO IN terminal Connect directly to your television. Do not connect the unit through a video cassette recorder, because the picture may not be played correctly due to the copy guard. Simple setup [For\the\United\Kingdom,\Continental\Europe\and\Russia] Use the RCAJ adaptor (included) if your television has a 21-pin SCART terminal. You do not have to connect anything to the AUDIO terminals.
4 Flat cable and optical cable Optical cable SPEAKERS EXT + LOOP AM GND 1 R (6≠) L 2 3 R (6≠) L 4 5 (6≠) 6 (3≠) - OPT 2 FRONT HF/LF ANT FM ANT TO SL-DT310 A OPT 1 CENTER SUBWOOFER (TV) SURROUND Insert fully, with this side facing up. AC IN 75≠ DIGITAL IN Optical cable B Insert fully, with this side facing up.
Other speaker setup options Attatching to a wall (Center and surround speakers only) 2 [Note] Simple setup The wall or pillar on which the speakers are to be attached should be capable of supporting 5 kg per screw. 1 Screw a screw (not included) into the wall. 30—35 mm Remove the stand. BEFORE REMOVING THE STAND ≥Take the speaker cable out of the stand’s hole if it is threaded through. ≥Lay the speaker on a soft cloth. ‰7.5—9.4 mm 8—11 mm Wall Unscrew the screw with a Phillips-head screwdriver.
STEP 7 QUICK SETUP 1 SLEEP AV SYSTEM TV AUX VCR EXT TV/AV TUNER BAND DVD CD 1 2 4 5 7 8 2 DOUBLE RE-MASTER 1 2 3 3 AUDIO ONLY GROUP 6 Press [DVD] to select “DVD”. Press [SETUP] to show the QUICK SETUP screen. [For\the\United\Kingdom,\Continental\Europe\and\Russia] REPEAT/ MIX 2CH PLAY MODE/ P.MEMORY CANCEL Press [Í] to turn on the unit. 9 SETUP QUICK SETUP S10/-/-- Select the menu language.
Control reference guide Remote control 1 SLEEP 2 AV SYSTEM TV AUX VCR EXT TV/AV TUNER BAND DVD CD 1 2 3 4 5 6 7 8 A B 1 2 3 4 C DOUBLE RE-MASTER 3 Getting started GROUP 4 REPEAT/ MIX 2CH 5 6 PLAY MODE/ P.MEMORY CANCEL 9 S10/-/-- 7 8 5 6 7 D 8 0 SKIP SLOW/SEARCH CH E 9 TOP MENU MENU DIRECT NAVIGATOR PLAY LIST F : ; < : ENTER DISPLAY G TV VOL r VOLUME = ? @ ; < RETURN TV VOL s > 9 MUTING C.S.M PL FL DISPLAY AUDIO ONLY C.
Discs—Basic play DIGITAL INPUT indicator [RAM] [DVD-A] [DVD-V] [VCD][[CD] [WMA] [MP3] [JPEG] 4 VOLUME Preparation ≥Press [Í] to turn on the unit. ≥Turn on the television and select the appropriate video input on the television to suit the connections for the unit. SA-DT310 SELECT DIGITAL INPUT DOWN AV CONTROL RECEIVER UP 1 Ë If the disc contains both audio data (WMA and MP3) and JPEG, check “Mixed disc—Audio & Stills” setting in the SETUP menu (➡page 31).
Discs—Basic play When a menu appears on the television [DVD-A] [DVD-V] [VCD] SL-DT310 DOUBLE RE-MASTER DVD / CD PLAYER < Disc operations SLEEP AV SYSTEM TV AUX VCR EXT TV/AV TUNER BAND DVD CD 1 2 3 4 5 6 7 8 9 GROUP REPEAT/ MIX 2CH PLAY MODE/ P.MEMORY CANCEL Numbered buttons SLOW/SEARCH SKIP SLOW/SEARCH 6, 5 CH TOP MENU Press [:] or [9]. MENU ≥Each press increases the number of skips.
Discs—Convenient functions A-B repeat play TV AUX VCR EXT TV/AV TUNER BAND DVD CD [RAM] [DVD-A] [DVD-V] [VCD][[CD]][WMA] [MP3] You can repeat a section between points A and B within a program, title or track. 1 DOUBLE RE-MASTER 1 2 3 4 5 6 7 8 9 Press [DISPLAY] until the unit information screen is displayed GROUP GROUP REPEAT/ MIX 2CH REPEAT PLAY MODE/ P.MEMORY CANCEL For Southeast Asia, Australia and N.Z. During play Numbered buttons S10/-/-- 0 ( ➡page 23).
Discs—Convenient functions 1 AV SYSTEM TV AUX VCR EXT TV/AV TUNER BAND DVD CD 1 2 3 4 5 6 7 8 9 SLEEP Press the numbered buttons to select a title, chapter, group or track ([WMA] [MP3] then press [ENTER]) . T1 DOUBLE RE-MASTER Title No. Disc operations PLAY MODE/ P.MEMORY CANCEL PLAY MODE CANCEL SKIP Numbered buttons S10/-/-- 0 SLOW/SEARCH SLOW/SEARCH 6, 5 CH 1 3, 4, 2, 1 ENTER TOP MENU MENU DIRECT NAVIGATOR PLAY LIST P:01 Chapter No. Program No.
≥“–” or “– –” is displayed instead of the language number in circumstances such as when no language is recorded on the disc. [DVD-A] (Motion picture parts only) [DVD-V] (Discs with multiple subtitle languages) You can change the subtitle language and turn the subtitles on and off. [RAM] You can turn the subtitles on and off. Soundtracks [RAM] [DVD-A] [DVD-V] [VCD] (Discs with multiple soundtracks) During play Press [DISPLAY] until the disc information screen is displayed.
Discs—Convenient functions Variable Zoom function SLEEP AV SYSTEM TV AUX VCR EXT TV/AV TUNER BAND DVD CD 1 2 3 4 5 6 7 8 [RAM] [DVD-V] [VCD] [DVD-A] (Motion picture parts only) Change the zoom ratio so the picture expands to the optimum size to fill the screen. Preparation Change the setting “TV Aspect” to suit your television (➡ page 31). DOUBLE RE-MASTER GROUP 1 REPEAT/ MIX 2CH PLAY MODE/ P.
Playing the programs or play lists on DVD-RAM [RAM] SLEEP AV SYSTEM TV AUX VCR EXT TV/AV TUNER BAND DVD CD 1 2 3 4 5 6 7 8 9 Selecting a program to play— DIRECT NAVIGATOR Use the program list to find programs to play. 1 DOUBLE RE-MASTER Press [DIRECT NAVIGATOR]. DIRECT NAVIGATOR REPEAT/ MIX 2CH PLAY MODE/ P.
WMA/MP3, CD text and JPEG navigation menus Track title search [WMA] [MP3] [CD] (CD text only) SLEEP AV SYSTEM TV AUX VCR EXT TV/AV TUNER BAND DVD CD 1 2 Example: finding a track including the word “LOVE” 1 While the menu is displayed Press [3, 4] to select “Find” and press [ENTER]. SELECT DOUBLE RE-MASTER NUMBER 3 SELECT 4 5 ENTER 6 REPEAT/ MIX 2CH 7 8 PLAY MODE/ P.
To use the tree screen to find a group [WMA] [MP3] [JPEG] 1 A menu appears after you insert the disc. While the menu is displayed Press [1] while a track is highlighted to display a tree screen ([WMA] [MP3]). Press [3, 4, 2, 1] to select “Tree” and press [ENTER] ([JPEG]). MENU G Playing HighMAT discs Press [3, 4, 2, 1] to select then press [ENTER].
Using GUI (Graphical User Interface) screens SLEEP AV SYSTEM TV AUX VCR EXT TV/AV TUNER BAND DVD CD 1 2 3 4 5 6 7 8 9 GROUP PLAY MODE/ P.MEMORY CANCEL Numbered buttons S10/-/-- 0 SLOW/SEARCH Disc operations SKIP CH 1 3, 4, 2, 1 ENTER TOP MENU MENU DIRECT NAVIGATOR PLAY LIST DISPLAY RETURN Press [3, 4] to select the setting. For your reference ≥Depending on the condition of the unit (playing, stopped, etc.
Unless otherwise indicated, select items with [2, 1] and change with [3, 4]. Disc information 7 1 2 8 1 OFF 128kbps 44.
Using GUI (Graphical User Interface) screens Unit information Audio menu Picture menu OFF/48kHz OFF 2 1 480 1 Double re-master [RAM] [DVD-A] [DVD-V] [CD] [WMA] [MP3] (➡ page 29) 2 Dialogue Enhancer on/off [DVD-V] (Discs where the dialogue is recorded in the center channel) This makes the dialogue in movies easier to hear. Only when “PROGRESSIVE” is on 23: [For\Southeast\Asia,\Australia\and\N.Z.
The radio SELECT VOLUME ∫ If noise is excessive in FM Press [FM MODE] to display “MONO”. MONO VOLUME FM 87.50 SA-DT310 Í/ I SELECT DIGITAL INPUT DOWN AV CONTROL RECEIVER UP Ë Press [FM MODE] again to cancel the mode. The mode is also canceled when you change the frequency. ∫ AM frequencyl step [For[Southeast[Asia[ TV AUX VCR EXT TV/AV TUNER BAND DVD CD 1 2 4 5 7 8 TUNER DOUBLE RE-MASTER 3 AUDIO ONLY GROUP 6 REPEAT/ MIX 2CH PLAY MODE/ P.
The radio Selecting channels SLEEP AV SYSTEM TV AUX VCR EXT TV/AV TUNER BAND DVD CD 1 2 3 4 5 6 7 8 9 TUNER DOUBLE RE-MASTER 1 Press [TUNER] to select “FM” or “AM”. 2 Press the numbered buttons or W] to select [:, X CH ] or [9, CHW the channel. GROUP REPEAT/ MIX 2CH PLAY MODE/ P.MEMORY CANCEL Numbered buttons S10/-/-- 2 FM 87.
Sound field Dolby Pro Logic II SLEEP AV SYSTEM TV AUX VCR EXT TV/AV TUNER BAND DVD CD 1 2 3 4 5 6 7 8 DVD DOUBLE RE-MASTER The Dolby Pro Logic II processor works not only on sources recorded with Dolby Surround, but also on any stereo source. 1 Press [ÎPLII]. GROUP PL REPEAT/ MIX 2CH MIX 2CH PLAY MODE/ P.
Sound field SLEEP DOUBLE RE-MASTER AV SYSTEM TV AUX VCR EXT TV/AV TUNER BAND DVD CD 1 2 3 4 5 6 7 8 9 Custom Sound Memory — Store the sound settings [DVD-A] [DVD-V] [VCD][[CD]] Store the sound settings for a disc so the unit recalls them the next time you play it. ≥Number of discs: 30 ≥Settings: Dolby Pro Logic II, Subwoofer level, Center focus, Sound filed control DOUBLE RE-MASTER GROUP ∫ Storing the settings REPEAT/ MIX 2CH PLAY MODE/ P.MEMORY CANCEL 1 Make the settings.
Sound quality Adjusting the bass Press [SUBWOOFER LEVEL]. SUB W 1 Each time you press the button: SUB W 1>SUB W 2>SUB W 3>SUB W 4>SUB W 0 ^_______-----------------------------------------------------} 0 : 0 dB 1 : i3 dB 2 : i5 dB 3 : i8 dB 4 : i10 dB Double re-master — Enjoying more natural sound [RAM] [DVD-A] [DVD-V] [CD] Discs recorded with 2-channel LPCM at 44.1 kHz or 48 kHz This feature gives you a more natural sound by adding higher frequency signals not recorded on the disc.
Convenient functions The sleep timer SLEEP AV SYSTEM TV AUX VCR EXT TV/AV TUNER BAND DVD CD 1 2 SLEEP This timer turns the unit off after a set time. Press [SLEEP] to select the time (minutes). DOUBLE RE-MASTER 3 AUDIO ONLY GROUP 4 5 6 7 8 9 SLEEP REPEAT/ MIX 2CH PLAY MODE/ P.MEMORY CANCEL Each time you press the button: SLEEP 30_—)SLEEP 60_—)SLEEP 90 ^-=SLEEP OFF(=SLEEP 120(_} S10/-/-- 0 SKIP SLOW/SEARCH To cancel the timer Press [SLEEP] to select “SLEEP OFF”.
Changing settings This chart shows the settings for this unit. Change the settings to suit your preferences and to suit the unit to the environment in which it is being used. These settings are retained in memory until they are changed, even if the unit is turned off. See page 32 for details on menu operation. ≥Underlined items are the factory preset. Disc Video Audio Display Others Items Options Audio Choose the preferred audio language.
Changing settings Common procedures SLEEP AV SYSTEM TV AUX VCR EXT TV/AV TUNER BAND DVD CD See page 31 for menu and option details. DVD DOUBLE RE-MASTER 1 2 3 4 5 6 7 8 9 Preparation Press [DVD]. 1 GROUP REPEAT/ MIX 2CH PLAY MODE/ P.MEMORY CANCEL SETUP Numbered buttons S10/-/-- 0 CANCEL Press [SETUP] to show the menus.
Entering a password (Ratings) [DVD-V] The password screen is shown when you select levels 0 to 7. 1 Input a 4-digit password with the numbered buttons and press [ENTER]. ≥If you enter a wrong number, press [CANCEL] to erase it before you press [ENTER]. ≥The lock symbol appears closed to show the rating is locked. ≥Do not forget your password. 2 Press [ENTER] to confirm the 4 digits. Now, when you insert a DVD-Video that exceeds the ratings limit you set, a message appears on the television.
Operating other equipment Connection example Ensure the power is off when connecting the cables. To show the video from the video cassette recorder Select VIDEO 2 input on your television in this example. Television. Video cassette recorder L VIDEO OUT R AUDIO OUT VIDEO IN AUDIO OUT 1 L 2 R Already connnected To play sound from a video cassette recorder To play sound from your television Reduce the volume on the television to minimum and control the volume on this unit.
Operating a video cassette recorder DIGITAL INPUT indicator VOLUME SA-DT310 Í /I SELECT DIGITAL INPUT DOWN AV CONTROL RECEIVER UP Ë Preparation ≥Face the remote control at this unit and press [VCR]. ≥You can operate the video cassette recorder. ≥Change the video input mode on the television (“VIDEO 2” in the example). ≥Face the remote control at the video cassette recorder for the following operations.
Optional antenna connections Use outdoor antennas if radio reception is poor. Note Disconnect the outdoor antenna when the unit is not in use. Do not use the outdoor antenna during an electrical storm. FM outdoor antenna (Using a television antenna) AM outdoor antenna (Using a vinyl wire) ≥Disconnect the FM indoor antenna. ≥The antenna should be installed by a competent technician. Run a piece of vinyl wire horizontally across a window or other convenient location. Leave the loop antenna connected.
Safety precautions Placement Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit’s service life. Do not place heavy items on the unit. Voltage Do not use high voltage power sources. This can overload the unit and cause a fire. Do not use a DC power source. Check the source carefully when setting the unit up on a ship or other place where DC is used.
Troubleshooting guide (Reference pages are shown as black circled numbers 9.) Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, consult your dealer for instructions. Power No power. ≥Insert the AC mains lead securely into the household mains socket. 9 The unit is automatically switched to the standby mode. ≥The unit was switched to standby by the sleep timer. N .
Sound Humming heard during play. ≥An AC mains lead or fluorescent light is near the cables. Keep other appliances and cords away from this unit’s cables. No sound from the subwoofer. ≥Check that the subwoofer has not been set to “SUB W OFF”. M Picture Picture distorted. ≥Some distortion is normal during SEARCH. ≥The screen may be disrupted briefly when you turn on and off the AUDIO ONLY feature. M No picture. ≥Check the connection. 8 ≥Make sure the television is on.
Specifications (DIN 45 500) AV CONTROL RECEIVER ∫ Amplifier section NORSK ∫ Pickup Power output (For the United Kingdom, Australia, N.Z. and Southeast Asia : 240V) RMS power output (THD 10 %) FRONT (1 kHz both channel driven) 2k60 W SURROUND (1 kHz both channel driven) 2k60 W CENTER (1 kHz) 60 W SUBWOOFER (100 Hz) 100 W DIN power output (THD 1.