Operating Instructions

5
RQT8538
If noise is excessive in FM
You can improve FM reception by switching reception to monaural.
Radio operations
BAND
TUNING MODE
TUNER
Input using the numbered
buttons
To select a 2-digit number
e.g. 11: [ 10] → [1] → [1]
>
=
To adjust the volume
VOL 22
0
(Minimum)
50
(Maximum)
– VOLUME +
Function indicator
This indicator lights up when
the radio is chosen.
To adjust the volume
To improve reception
Manual
tuning
Radio stations
can be tuned
manually by
selecting the
station’s
frequency.
Select
“FM” or “AM”
Select the
frequency
Select
“
MANUAL TUNE ”
Select
“FM” or “AM”
Select the
frequency
Auto tuning
• Auto tuning stops when it finds a station.
• To cancel auto tuning press the same button
again.
Press and hold until the frequency
starts changing rapidly
Main unit
Remote control
NoteNote
Auto tuning may not function when there is
excessive interference.
Remote control
Main unit
BAND
TUNING MODE
TUNER
FM AM
Extend the whip antenna and
adjust its direction.
Change the direction and location
of the AM loop antenna.
Each time you press , the
display screen changes.
MONO
PLAY MODE
AU TO S TER EO
Ö
Preset
tuning
Radio stations
can be preset
into channels to
make it easy to
tune.
You can preset
up to 20 FM
channels and up
to 12 AM
channels.
Select a
channel
Tune to
the station
you want
to set as
the preset.
NoteNote
The station occupying a channel is erased if
another station is preset over that channel.
Within 10 seconds
Main unit
Select a channel
Remote control
Enter preset mode
PGM
Select
“FM” or “AM”
Select
“PRESET TUNE”
Select a
channel
TUNER/
BAND
Select a channel
123
4
5
6
7
8
0
9
>
=
10
TUNER/
BAND
Select
“FM” or “AM”
Select
“FM” or “AM”
TUNER
g To preset
g To select a channel
SC-EN29-EB (RQT8538-B)_1.fm 5 ページ ２００５年１１月１６日 水曜日 午後５時１８分