Operating Instructions

21
TQBJ2174
4 Put up the wall mounting sheet on the wall where
the unit is to be mounted.
≥ Spread out the wall mounting sheet when tapping it to
the wall.
5 Make holes on the wall at the center of each cross
mark on the sheet.
≥ Take the sheet away from the wall after its use.
6 Attach each wall mount bracket to the wall with two
screws (not supplied).
≥ Use a level to ensure both wall mount brackets are
level.
7 Attach the safety holder with two screws (not
supplied) to the wall.
8 Attach the unit.
≥ Connect the antenna and the AC mains lead to the unit
before hanging the unit onto the wall. (l 6)
1 Hook the unit securely onto the wall mount
brackets with both hands.
2 Slightly lift up the unit vertically until the slot
reaches the hook of the safety holder.
3 Push down until the unit is hooked and locked onto
the safety holder with a click sound.
≥ After hanging the unit, slightly pull the unit carefully to
confirm that the unit sits securely on the wall mount
brackets and the safety holder.
Wall mounting sheet
Adhesive tape (not supplied)
Wall
420 mm
102.5 mm
130.5 mm
141 mm
100 mm
118.5 mm
300 mm
100 mm
39 mm
73 mm
Space required
At least 30 mm
‰7.5 mm to
‰9.4 mm
‰4.0 mm
Wall mount bracket
At least 30 mm
‰7.5 mm to
‰9.4 mm
‰4.0 mm
Safety holder
Wall
AC mains lead

Hook
Wall mount
bracket
Safety holder
Wall
Slot
Pull Pull
SC-HC410_412-EGEB~TQBJ2174.book 21 ページ ２０２２年６月２０日 月曜日 午前１０時１４分