Operating Instructions - Language - English

Operations
14
RQT7380
Control guide
TUNED
MONO SLEEP ST
kHz
MHz
DIGITAL INPUT
SURROUND
SFC
M
2CH MIX C.FOCUS
L
C
R
LS RS
S
LFE
%
%
DIGITAL
PRO LOGIC
100Hz 1kHz
10kHz
Main unit
[SFC, MUSIC, AV/MOVIE]
For selecting sound field control modes.
[INPUT SELECTOR]
For selecting input.
Standby indicator [^]
When the unit is connected to the AC mains supply, this
indicator lights up in standby mode and goes out when the
unit is turned on.
[POWER 8]
Press to switch the unit from on to standby mode or vice
versa.
In standby mode, the unit is still consuming a small amount
of power.
Remote control signal sensor
[VCR 2]
Connect equipment like video cameras.
[TUNE2, TUNE1]
For tuning the radio and selecting preset stations.
Display
[DIGITAL INPUT]
Program format indicators
Show the channels contained in the digital
input signal.
They do not light when input is analog.
L: Front left channel
C: Center channel
R: Front right channel
LS: Surround left channel
S: If the surround channel is monaural.
RS: Surround right channel
LFE (Low Frequency Effects): Deep-bass
effect.
[%DIGITAL, dts, %PRO LOGICII]
Light to indicate the source’s input signal and
decoding format used.
[TUNED, M, MONO, ST ]
Radio indicators
TUNED: A station is tuned.
M: Flashes or lights during presetting.
MONO: You have switched to monaural mode with [FM
MODE] to improve reception.
ST: A stereo FM broadcast is tuned.
General display
Shows the input mode, radio
frequency, and other general
information.
[kHz, MHz]
Frequency unit indicators
kHz: AM, or PCM sampling
frequency
MHz: FM
INPUT SELECTOR
MUSIC AV/MOVE TUNE TUNE
^
SFC
VIDEO IN L AUDIO IN R VCR 2
8
POWER
SC-HT07
SC-HT07PP-EN.fm Page 14 Friday, May 7, 2004 3:41 PM