Operating Instructions

ManualsBrandsPanasonic ManualsAV ProductsSCHTB250EB

TQBJ2086

Audio format

You can view the current audio format.

Press and hold [SOUND] for a minimum of

4 seconds.

Note:

• The indicator for the selected setting blinks for 5 seconds

and then exits the setting mode.

• The indicators may work differently if the main unit detects

an unsupported audio format from the connected TV.

• This function does not work when is selected as the

source.

Auto power down

The main unit is automatically switched off if there

is no audio input and when you do not use it for

approx. 20 minutes.

Press and hold [HDMI (ARC)] for a minimum of

4 seconds to select the mode.

Note:

• The indicator for the selected setting blinks for 5 seconds

and then exits the setting mode.

• The setting is maintained until it is changed again.

Bluetooth

standby

This function allows you to connect a paired

Bluetooth

device when the main unit is in standby

mode.

Press and hold [OPTICAL] for a minimum of

4 seconds.

Note:

• The indicator for the selected setting blinks for 5 seconds

and then exits the setting mode.

• The setting is maintained until it is changed again.

• If the AC mains lead is disconnected, the Bluetooth

standby function may not work. Make the setting again.

Volume limitation

The volume is set to 50 when you switch on the

system although the volume is set to above 50

before it is switched off.

Press and hold [DIMMER] for a minimum of

4 seconds.

Note:

• The indicator for the selected setting blinks for 5 seconds

and then exits the setting mode.

• The setting is maintained until it is changed again.

Audio mode Indication

Dolby Digital

DTS

PCM

Mode Indication

On (default)

Off

MUSIC CINEMA HDMI(ARC) OPTICAL

Mode Indication

Off (default)

Mode Indication

On (default)

Off

MUSIC CINEMA HDMI(ARC) OPTICAL

TQBJ2086_en.fm Page 13 Wednesday, December 27, 2017 2:30 PM

offset printing