Operating Instructions

ManualsBrandsPanasonic ManualsAV ProductsSCHTB250EB

TQBJ2086

Indicators illumination

The indicators show the condition of this system. The indicator patterns illustrated below are shown

during normal operational conditions. They do not refer to the indications of a problem.

Indicators Description

The indicator blinks for 5 seconds.

• When the setting is on

(“Auto power down”, “Bluetooth

standby”, “Volume limitation”)

(

~13)

• When the audio format is Dolby Digital. (~13)

• When the dual audio is main. (~12)

The indicator blinks for 5 seconds.

• When the audio format is DTS

. (~13)

The indicator blinks for 5 seconds.

• When the setting is off

(“Auto power down”, “Bluetooth

standby”, “Volume limitation”)

(

~13)

• When the audio format is PCM. (~13)

• When the dual audio is secondary. (~12)

The indicator blinks quickly.

• When the main unit is ready for pairing. (~11)

The indicator blinks slowly.

• When the main unit is waiting to connect. (~11)

The indicator lights on.

• When the main unit is connected to a Bluetooth

device.

(

~11)

The indicator blinks for 5 seconds.

• When the dual audio is main+secondary. (~12)

The indicator blinks for 10 seconds.

• When the remote control is set to code 2. (~16)

The indicator blinks for 10 seconds.

• When the remote control is set to code 1. (~16)

The indicators blink until the system restarts.

• When the main unit is reset. (~16)

The indicators blink continuously.

• When the sound is muted. (~12)

The indicators blink 10 times.

• When active subwoofer is failed to connect. (~16)

MUSIC CINEMA HDMI(ARC) OPTICAL

TQBJ2086_en.fm Page 17 Wednesday, December 27, 2017 2:30 PM

offset printing