Operating Instructions
18
TQBJ2086
Specifications
█
Amplifier section
[HTB258] [HTB250]
RMS output power: Dolby Digital Mode
Front ch 40 W per channel (6 Ω),
1 kHz, 10% THD
Subwoofer ch 40 W per channel (4 Ω),
100 Hz, 10% THD
Total RMS Dolby Digital mode power 120 W
[HTB208] [HTB200]
RMS output power stereo mode (both ch
driven)
Front ch 40 W per channel (6 Ω),
1 kHz, 10% THD
Total RMS Stereo mode power 80 W
█
Terminals section
HDMI output (ARC)
Output connector Type A (19 pin)
Digital audio input
Optical digital input Optical terminal
Sampling frequency 32 kHz, 44.1 kHz, 48 kHz
Audio format LPCM, Dolby Digital,
DTS Digital Surround
TM
USB Port For software update
█
Bluetooth
®
section
Version Bluetooth
®
Ver. 2.1 + EDR
Class Class 2
Supported profiles A2DP
Operating frequency 2.4 GHz band FH-SS
Frequency band 2402 MHz to 2480 MHz
Operation distance 10 m line of sight
Maximum RF Power 4 dBm
Supported codec SBC
█
Speaker section
Front speakers (Built-in)
Full range 4 x 10 cm (Cone type) x 1/ch
Active subwoofer [HTB258] [HTB250]
Woofer 14 cm cone type x 1
█
Wireless section
Wireless module
Frequency range 2404 MHz to 2476 MHz
No. of channels 38
RF output power 7 dBm (max.)
█
General
Power supply AC 220 V to 240 V, 50 Hz
Power consumption
Main unit 15 W
Active subwoofer [HTB2 58] [HTB250] 7.5 W
Dimensions (W x H x D)
Main unit 450 mm x 51 mm x 135 mm
Active subwoofer [HTB2 58] [HTB250]
97 mm x 451 mm x 307 mm
Mass
Main unit 1.6 kg
Active subwoofer [HTB2 58] [HTB250] 4.4 kg
Operating temperature range 0°C to +40°C
Operating humidity range
20% to 80% RH (no condensation)
Note:
• Specifications are subject to change without notice.
Mass and dimensions are approximate.
• Total harmonic distortion is measured by the digital
spectrum analyser.
Power consumption in standby mode
(approximate)
Main unit
When Bluetooth
®
standby is off 0.5 W
When Bluetooth
®
standby is on 2.0 W
Active subwoofer [HTB258] [HTB2 50] 0.5 W
When wireless activated in network standby
2.0 W
TQBJ2086_en.fm Page 18 Wednesday, December 27, 2017 2:30 PM
offset printing