Operating Instructions

TQBJ2216

Placing the main unit in a rack or on a table

Additionally required accessories (commercially available)

 Fall prevention cord (x2)

 Screw eyes (to attach the fall prevention cord) (x2)

Note:

• Use commercially available screws that are capable of supporting over 30 kg.

• Use a cord that is capable of supporting over 30 kg (with a diameter of about 1.5 mm).

1 Attach the cord to the main unit.

If the cord cannot be threaded through the holes, try bending the cord, about 5 mm apart from the tip,

at an angle of 45° (as illustrated above).

Attaching the stand to the main unit (Optional)

You can attach the stand (supplied) to the main unit to increase the gap on the bottom of the main unit

so that the you can put it on top of compatible TV stand.

Screw

Stand

Cord

htb600.400_TQBJ2216-2_en.fm Page 12 Friday, June 3, 2022 11:25 AM