Operating Instructions

20
TQBJ2216
█ FW UPDATE
Refer to “Firmware updates” (~below).
█ VERSION
Shows the firmware version.
Note:
Press [OK] again to exit.
Firmware updates
Occasionally, Panasonic may release updated
firmware for this system that may add or improve
the way a feature operates. These updates are
available free of charge.
Preparation
Download the latest firmware from the following
website and store it to a USB device to update the
firmware.
https://panasonic.jp/support/global/cs/audio/
(This site is in English only.)
1 Turn off the main unit, then connect the
USB device containing the latest firmware
to the main unit.
Depending on the shape of the USB device, the
cables connected to other terminals may
obstruct the connection. In that case, unplug
the connection cables around the USB device
first, then reconnect it.
2 Press [1] on the main unit to turn it on.
3 Press [SETUP] repeatedly to select “FW
UPDATE” and then press [OK].
4 Press [5] or [K] repeatedly to select
“YES?” and then press [OK].
The system switches off automatically when
the update completes and then switch on
again.
Note:
• You cannot output sound from this unit while updating the
firmware.
• To view the TV during update, change the settings on the
TV to have the sound output from the TV’s speakers. Refer
to the operating instructions of the TV for details.
HDMI CEC
This unit supports “HDMI CEC” (Consumer
Electronics Control) function.
See the operating instructions for connected
equipment for operational details.
Preparation
Confirm that the HDMI connection has been made.
(~8, 9)
Power on link
When the TV is switched on, the main unit also
switches on automatically. (This function does not
work when BT is the source.)
Power off link
When the TV is switched off, the main unit also
switches off automatically. (This function does not
work when BT is the source.)
Volume adjustment
You can control the volume setting of this system
using the volume or mute button on the TV remote
control.
If the TV’s speaker selection is changed to the TV
speakers, the main unit’s speakers are muted.
Muting will be cancelled by selecting the main
unit’s speakers again.
Changing speakers
When the main unit switches on, this system will
be selected as the TV’s speakers automatically.
When you switch off the main unit, TV speakers
will be automatically activated.
Note:
The operation cannot be guaranteed on all HDMI CEC
equipment.
DO NOT DISCONNECT the AC mains
lead while updating the firmware.
During the update process, no other
operations can be performed.
DO NOT DISCONNECT the AC mains lead
while “UPG” or “%” is shown on the
display panel.
(“” stands for a number.)
htb600.400_TQBJ2216-2_en.fm Page 20 Friday, June 3, 2022 11:25 AM