Operating Instructions

TQBJ2216

Overview of controls

Do the procedure with the remote control. You can also use the buttons on the main unit if they

are the same.

A Standby/on switch [1]

Press to switch the unit from on to standby

mode or vice versa. In standby mode, the unit

is still consuming a small amount of power.

B Adjust the volume level (~18)

C Select the input source

[HTB400]

[HTB600]

D Select the Bluetooth

device as the source

(~17)

To start Bluetooth

pairing, press and hold

[].

E Display panel

F Remote control sensor

Point the remote control at the remote control

sensor, away from obstacles and within the

operation range.

Distance: Within approximately 7 m

Angle: Approximately 20° up and down, 30° left

and right

G [HTB600]

WIRELESS LINK indicator (~17)

Note:

• Do not place objects in front of this system.

• Do not place objects on top of the main unit.

Do not block the top surface of the main unit for proper

ventilation.

• Remove dust and dirt from this system regularly. (~23)

[HTB600]

Main Unit (Front)

Active subwoofer (Front)

TV BT

HDMI

htb600.400_TQBJ2216-2_en.fm Page 5 Friday, June 3, 2022 11:25 AM