Operating Instructions

24
TQBJ2196
Indicators illumination
The indicators show the condition of this system. The indicator patterns illustrated below are shown
during normal operational conditions. They do not refer to the indications of a problem.
Indicators Description
The indicator blinks for 5 seconds.
• When surround is set to off. (~18)
• When the setting is on
(“Auto off”, “Bluetooth
®
standby”, “Network standby”, “Volume
limitation”). (
~19)
• When the audio format is Dolby Digital. (~18)
The indicator blinks for 5 seconds.
• When surround is set to on. (~18)
• When the audio format is DTS
®
. (~18)
The indicator blinks for 5 seconds.
• When the setting is off
(“Auto off”, “Bluetooth
®
standby”, “Network standby”, “Volume
limitation”). (
~19)
• When the audio format is PCM. (~18)
The indicator blinks for 10 seconds.
• When the remote control is set to code 1. (~23)
The indicator blinks for 5 seconds.
• When the dual audio is main. (~18)
The indicator blinks for 5 seconds.
• When the dual audio is secondary. (~18)
The indicator blinks for 10 seconds.
• When the remote control is set to code 2. (~23)
The indicator blinks for 5 seconds.
• When the dual audio is main+secondary. (~18)
The indicators blink continuously.
• When the sound is muted. (~17)
The indicator blinks quickly.
• When the main unit is ready for pairing. (~16)
The indicator blinks slowly.
• When the main unit is waiting to connect. (~17)
The indicator switched on.
• When the main unit is connected to a Bluetooth
®
device. (~17)
The indicator blinks.
• When the main unit is not connected to any network.
The indicator switched on.
• When the main unit is connected to a network. (~16)
All indicators The indicators blink until the system restarts.
• When the main unit is reset. (~23)
The indicators blink 10 times.
• When active subwoofer failed to connect. (~22)
TQBJ2196_en.fm Page 24 Tuesday, February 26, 2019 6:32 PM