Operating Instructions

25
TQBJ2196
Specifications
█ General
Dimensions (W x H x D)
Main unit
For table top layout
853 mm x 60.5 mm x 90 mm
For wall mounting layout
853 mm x 60.5 mm x 111 mm
Active subwoofer
185 mm x 303 mm x 337 mm
Mass
Main unit
For table top layout 1.9 kg
For wall mounting layout 2.0 kg
Active subwoofer 4.8 kg
Operating temperature range 0°C to +40°C
Operating humidity range
20% to 80% RH (no condensation)
█ Amplifier section
RMS output power: Dolby Digital Mode
Front ch 60 W per channel (6 Ω),
1 kHz, 10% THD
Subwoofer ch 120 W per channel (3 Ω),
100 Hz, 10% THD
Total RMS Dolby Digital mode power 240 W
█ Terminals section
HDMI output (ARC)
Output connector Type A (19 pin)
Digital audio input
Optical digital input Optical terminal
Sampling frequency 32/44.1/48 kHz
Audio format LPCM, Dolby Digital,
DTS Digital Surround
TM
USB Port For service use only
█ Speaker section
Front speakers (Built-in)
Full range 4.5 x 12 cm (Cone type) x 2
Active subwoofer
Woofer 16 cm cone type x 1
█ Bluetooth
®
section
Version Bluetooth
®
Ver. 4.1
Class Class 1
Supported profiles A2DP
Frequency band 2.4 GHz band FH-SS
Operation distance 30 m line of sight
Supported codec SBC
For Europe, the United Kingdom and Ireland
Operating frequency 2402 MHz to 2480 MHz
Maximum power (EIRP) 10 dBm
█ Wi-Fi section
Wi-Fi
WLAN Standard IEEE802.11a/b/g/n
Frequency range 2.4 GHz band (1-13 ch)/
5 GHz band
Security WPA2
TM
/WPA
TM
For Europe, the United Kingdom and Ireland
Operating frequency 2412 MHz to 2472 MHz
5180 MHz to 5320 MHz
5500 MHz to 5700 MHz
5745 MHz to 5825 MHz
Maximum power (EIRP) 18 dBm
Audio supported format (Google Chromecast)
HE-AAC/LC-AAC/MP3/CELT/Opus/Vorbis/
Wav/FLAC
Sampling frequency 8/12/16/24/32/48/11.025/
22.05/44.1 kHz
Audio word size 8/16 bits
Channel count 2 ch
█ Wireless section
Wireless module
Frequency range 5.740 GHz to 5.840 GHz
No. of channels 58
For Europe, the United Kingdom and Ireland
Operating frequency 5740 MHz to 5840 MHz
Maximum power (EIRP) 10 dBm
Note:
• Specifications are subject to change without notice.
Mass and dimensions are approximate.
• Total harmonic distortion is measured by the digital
spectrum analyser.
Power supply AC 220 V to 240 V, 50 Hz
Power consumption
Main unit 26 W
Active subwoofer 20 W
For Australia and New Zealand
Power consumption in standby mode
(approximate)
Main unit
When Bluetooth
®
and network standby is off
0.5 W
When Bluetooth
®
and network standby is on
3.0 W
Active subwoofer 0.5 W
For others
Power consumption in standby mode
(approximate)
Main unit 0.5 W
Active subwoofer 0.5 W
TQBJ2196_en.fm Page 25 Tuesday, February 26, 2019 6:32 PM