SC-HTB770_RQT9849-B_mst.book 1 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Operating Instructions Home Theater Audio System Model No. SC-HTB770 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Model number suffix “EB” denotes UK model.
SC-HTB770_RQT9849-B_mst.book 2 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Safety precautions Table of contents WARNING CAUTION Unit Unit ≥ To reduce the risk of fire, electric shock or product damage, jDo not expose this unit to rain, moisture, dripping or splashing. jDo not place objects filled with liquids, such as vases, on this unit. jUse only the recommended accessories. jDo not remove covers. jDo not repair this unit by yourself. Refer servicing to qualified service personnel.
２０１３年２月２５日 Caution for AC Mains Lead (For the AC mains plug of three pins) For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse.
SC-HTB770_RQT9849-B_mst.book 4 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Table of contents Safety precautions ........................................................................................... 2 Caution for AC Mains Lead ............................................................................. 3 About Bluetooth® ............................................................................................. 3 Before use Supplied items ........................................................................
SC-HTB770_RQT9849-B_mst.book 5 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Before use ≥ The illustrations shown may differ from your unit. ≥ These operation instructions are applicable to model SC-HTB770 for variety of regions. Unless otherwise indicated, illustrations in these operating instructions are of the model for the United Kingdom and Ireland.
SC-HTB770_RQT9849-B_mst.book 6 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Control reference guide This system (Front) 4 5 6 7 1 2 3 Main unit 1 2 3 4 *1 *2 6 Standby/on switch (Í/I) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
SC-HTB770_RQT9849-B_mst.
SC-HTB770_RQT9849-B_mst.book 8 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Remote control ∫ Before using for the first time Remove the insulation sheet A.
SC-HTB770_RQT9849-B_mst.book 9 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Step 1 Selecting the placement method Getting started ≥Choose a placement method that suits you best.
SC-HTB770_RQT9849-B_mst.book 10 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Caution ≥ This system is to be used only as indicated in these instructions. Failure to do so may lead to damage to the amplifier and/ or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance. ≥ Do not attempt to attach the speakers to a wall using methods other than those described in this manual.
SC-HTB770_RQT9849-B_mst.book 11 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Step 2 Assembling the speakers When attaching the speakers to a wall Place the speakers horizontally The speakers can be wall mounted by drilling screws into the wall, etc. Make sure that the screw used and the wall are strong enough to support the weight of at least 33 kg. The screws and other items are not supplied as the type and size will vary with each installation.
SC-HTB770_RQT9849-B_mst.book 12 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Connect the speaker cables. * Push 45 Green Red 1 Insert the wire fully. r: White s: Blue line White A Right speaker connector B Centre speaker connector C Left speaker connector ≥ Insert the wire fully, taking care not to insert beyond the wire insulation. 2 Press into the groove.
SC-HTB770_RQT9849-B_mst.book 13 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Wall mount the speakers: Fit the speaker securely onto the screw(s). Red connector: The speaker attached to the red connector cable is to be placed on the right side. Getting started White connector:The speaker attached to the white connector cable is to be placed on the left side. White Red A Right speaker connector B Left speaker connector DO ≥ Move the speaker so that the screw is in this position.
SC-HTB770_RQT9849-B_mst.book 14 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Place the front speakers vertically The speakers can be wall mounted by drilling screws into the wall, etc. Make sure that the screw used and the wall are strong enough to support the weight of at least 33 kg. The screws and other items are not supplied as the type and size will vary with each installation. ≥For details about the required screws, refer to the diagram below the step “Drive a screw into the wall.”(> 16).
SC-HTB770_RQT9849-B_mst.book 15 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Assemble the centre speaker: Connect the speaker cable. ≥ Insert the wire fully, taking care not to insert beyond the wire insulation. A Centre speaker connector 1 Insert the wire fully. r: White s: Blue line Green Push Assemble the front speakers: Attach the stand neck. ≥ The two front speakers are interchangeable. ≥ Keep the screws out of reach of children to prevent swallowing. Getting started A Screw (supplied) ≥ Tighten securely.
SC-HTB770_RQT9849-B_mst.book 16 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Drive a screw into the wall. ≥ Use the measurements indicated below to identify the screwing positions on the wall. ≥ Leave at least 20 mm of space above and on each side of the speaker to allow enough space for fitting the speaker. ≥ Keep the screws out of reach of children to prevent swallowing.
SC-HTB770_RQT9849-B_mst.book 17 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Fit the speaker(s) securely onto the screw(s). Red connector: The speaker attached to the red connector cable is to be placed on the right side. White connector:The speaker attached to the white connector cable is to be placed on the left side. White Red B Right speaker connector Getting started A Left speaker connector DO Front speaker DO NOT Centre speaker ≥ Move the speaker so that the screw is in this position.
SC-HTB770_RQT9849-B_mst.book 18 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 When placing the speakers on a table Place the speakers using the leg stands ∏ 2 Front Speakers ∏ 1 Centre speaker ∏ 3 Speaker cables WHITE: Left RED: Right GREEN: Centre ∏ 1 Metal bracket ∏ 2 Leg stands ∏ 6 Screws ≥For a safety measure to prevent the speakers from falling, refer to page 23. ≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
SC-HTB770_RQT9849-B_mst.book 19 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Place the speakers using the support legs and speaker feet ∏ 2 Front Speakers ∏ 1 Centre speaker ∏ 3 Speaker cables WHITE: Left RED: Right GREEN: Centre ∏ 1 Metal bracket ∏ 2 Support legs ∏ 6 Screws ∏ 2 Speaker feet ≥For a safety measure to prevent the speakers from falling, refer to page 23. ≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Attach the support legs and speaker feet.
SC-HTB770_RQT9849-B_mst.book 20 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Place the front speakers using the speaker bases ∏ 2 Front Speakers ∏ 1 Centre speaker ∏ 2 Stand necks ∏ 2 Speaker bases ∏ 6 Screws ∏ 2 Speaker feet ∏ 3 Speaker cables WHITE: Left RED: Right GREEN: Centre ∏ 2 Side caps ≥For a safety measure to prevent the speakers from falling, refer to page 23. ≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
SC-HTB770_RQT9849-B_mst.book 21 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Assemble the front speakers: Attach the stand neck. ≥ The two front speakers are interchangeable. ≥ Keep the screws out of reach of children to prevent swallowing. A Screw (supplied) ≥ Tighten securely. Getting started Assemble the front speakers: Insert the speaker cable through the speaker base and connect the speaker cables. ≥ Be sure to insert the speaker cable through the threading hole as indicated in the illustration.
SC-HTB770_RQT9849-B_mst.book 22 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Assemble the front speakers: Attach the speaker base. ≥ The two front speakers are interchangeable. ≥ Keep the screws out of reach of children to prevent swallowing. Screw (supplied) ≥ Tighten securely. Align the projecting parts with the holes on the speaker. Press into the groove. Red connector: The speaker attached to the red connector cable is to be placed on the right side.
SC-HTB770_RQT9849-B_mst.book 23 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Additional speaker fall prevention measures To prevent the speakers from falling, it is recommended, as an additional protection measure, to attach the speakers to the wall or table with a fall prevention cord (hereafter “cord”). ≥ Consultation with a qualified installation specialist concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support is recommended (> 12, 16).
SC-HTB770_RQT9849-B_mst.book 24 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 When attaching the speakers vertically Wall mounting B A C A C * B * A C A On a table * * A Cord*1,2 B Screw eye *1 *2 24 C Wall D Approx. 150 mm If the cord cannot be threaded through the holes, try bending the cord in 2 locations, about 10 mm apart from the tip, at an angle of 45o (as illustrated above).
SC-HTB770_RQT9849-B_mst.book 25 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Step 3 Connections ≥Turn off all equipment before connection and read the appropriate operating instructions. Do not connect the AC mains lead until all other connections are completed. ∫ HDMI ≥ The HDMI connection supports VIERA Link “HDAVI Control” (> 31) when used with a compatible Panasonic TV. ≥ Use the ARC compatible High Speed HDMI Cables. Non-HDMI-compliant cables cannot be utilised.
SC-HTB770_RQT9849-B_mst.book 26 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Connection with other devices You can direct the audio signal from the connected Blu-ray Disc player, DVD player, Set Top Box, etc. to this system. When the device has an HDMI terminal Preparation ≥Connect the main unit to the TV (> 25). HDMI OUT e.g., Blu-ray Disc player HDMI OUT A e.g., Set top box AUX2 (HDMI3) AV IN HDMI OUT e.g.
SC-HTB770_RQT9849-B_mst.book 27 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Speaker cable connection Match the connector shape and connect to the terminals of the same colour. 6 R 6 CENTER 6 L DIGITAL AUDIO IN AC IN 6 R 6 CEN TER 6 L SPE AK ERS A RED Right speaker connector B GREEN Centre speaker connector C WHITE Left speaker connector AC mains lead connection Getting started ≥ Connect only after all other connections are completed.
SC-HTB770_RQT9849-B_mst.book 28 ページ ２０１３年２月２５日 Active subwoofer wireless connection Preparation ≥ Turn on the main unit. Press [BÍ CI]. 月曜日 午前１１時５３分 Bluetooth® connection By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® audio device from this system wirelessly. Preparation ≥ Turn on the Bluetooth® feature of the device and place the device near the main unit. Bluetooth® pairing Press [ ] to select “ ”. ≥ If the “ ” indicator flashes quickly, go to step 3.
SC-HTB770_RQT9849-B_mst.book 29 ページ ２０１３年２月２５日 Using this system 月曜日 午前１１時５３分 Operations Adjust the volume and sound effect level. Preparation ≥ Turn on the active subwoofer. ≥ Turn on the TV and/or connected device. ∫ To adjust the volume of this system Press [i VOL j]. ≥ Volume range: 0 to 100* ∫ To adjust the dialog effect level DIALOG LEVEL INPUT SELECTOR LINK MODE SOUND ----PAIRING This setting will change the level of the Clearmode dialog effect.
SC-HTB770_RQT9849-B_mst.book 30 ページ ２０１３年２月２５日 3D sound This system provides a feeling that the sound and the image are as one. ≥ To change the applied effect, refer to “Sound modes”. (> right) e.g., Image of 3D sound field 月曜日 午前１１時５３分 Sound modes By changing the sound mode, it is possible to enjoy the sound that is suitable to the TV program or image from the connected device. ∫ To select the sound mode Press [SOUND].
SC-HTB770_RQT9849-B_mst.book 31 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Linked operations with the TV (VIERA Link “HDAVI ControlTM”) What is VIERA Link “HDAVI Control”? Preparation 1 Confirm that the HDMI connection has been made. (> 25, 26) 2 Set the “HDAVI Control” operations on the connected equipment (e.g., TV). 3 For the optimal “HDAVI Control” operations change the following settings on the connected TV*1. ≥ Set the default speaker settings to this system.
SC-HTB770_RQT9849-B_mst.book 32 ページ ２０１３年２月２５日 Advanced operations Audio format indicator To display the current audio format. Press and hold [SOUND] for more than 4 sec. With this function, you can prevent sudden loud sounds. The output will be reduced automatically when the input exceeds a certain level. Press and hold [INPUT SELECTOR] on the remote control for more than 4 sec. “STADIUM” indicator blinks: Dolby Digital is the audio format. “STANDARD” indicator blinks: Auto gain control is on.
２０１３年２月２５日 Using the Dolby Virtual Speaker effect Depending on your preference, It is possible to turn off the 3D surround effect and the clearmode dialog effect. While pressing and holding [SOUND] on the remote control, press and hold [VOL r] on the main unit for more than 4 sec. “STANDARD” indicator blinks: 3D surround effect and clear-mode dialog effect is on. “STEREO” indicator blinks: 3D surround effect and clear-mode dialog effect is off.
SC-HTB770_RQT9849-B_mst.book 34 ページ ２０１３年２月２５日 ∫ To reduce the clear-mode dialog effect When the dialog does not sound natural while the volume is set low, it is possible to reduce the dialog enhancing effect as follows: While pressing and holding [SOUND] on the remote control, press and hold [s VOL] on the main unit for more than 4 sec. ≥ All the indicators will blink once when the clear-mode dialog effect is reduced.
SC-HTB770_RQT9849-B_mst.book 35 ページ ２０１３年２月２５日 HDMI This system does not operate correctly. If the HDMI cable is connected to the wrong terminal (HDMI IN or HDMI OUT), this system will not operate correctly. Turn the main unit off, disconnect the AC mains lead and reconnect the HDMI cable(s). (> 25, 26) VIERA Link related operations no longer function properly. ≥ Check the VIERA Link setting on the connected devices.
SC-HTB770_RQT9849-B_mst.book 36 ページ ２０１３年２月２５日 Sound No sound (or image). ≥ Turn muting off. (> 29) ≥ Check the connections to the other devices. (> 25, 26) ≥ Make sure that the received audio signal is compatible with this system. (> 38) ≥ Turn this system off and then on again. ≥ If the main unit is connected to the TV with only an HDMI cable, make sure that the TV’s HDMI terminal is labelled “HDMI (ARC)”. If not, connect using the optical digital audio cable.
SC-HTB770_RQT9849-B_mst.book 37 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Indicator illumination The indicators display the condition of this system by flashing. The indicator patterns illustrated below are displayed during normal operational conditions. They do not refer to the indications of a problem. Indicator Description The BD/DVD indicator blinks*2 and sound mode indicators light up in sequence for 1 minute.
SC-HTB770_RQT9849-B_mst.book 38 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Specifications AMPLIFIER SECTION RMS output power: Dolby Digital Mode Front ch (L, R ch) 60 W per channel (6 ≠), 1 kHz, 10 % THD Centre ch (C ch) 60 W per channel (6 ≠), 1 kHz, 10 % THD Subwoofer ch 120 W per channel (8 ≠), 100 Hz, 10 % THD Total RMS Dolby Digital mode power 300 W WIRELESS SECTION Wireless module Frequency Range No. of channels 2.40335 GHz to 2.
SC-HTB770_RQT9849-B_mst.book 39 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Unit care SPEAKER GENERAL ∫ Clean this system with a soft, dry cloth For wall mounting layout Horizontal placement Dimensions (WkHkD) 1230 mmk68 mmk41 mm Mass 1.98 kg Vertical placement of front speakers Front speaker Dimensions (WkHkD) 68 mmk541 mmk41 mm Mass 0.78 kg Centre Speaker Dimensions 178 mmk70 mmk45 mm (WkHkD) Mass 0.
SC-HTB770_RQT9849-B_mst.book 40 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Safety information for customers in the EU Declaration of Conformity (DoC) Hereby, “Panasonic Corporation” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Customers can download a copy of the original DoC to our R&TTE products from our DoC server: http://www.doc.panasonic.
SC-HTB770_RQT9849-B_mst.book 41 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Norsk Samsvarserklæring (DoC) Български Декларация за съответствие (DoC) “Panasonic Corporation” erklærer at utstyret er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF. Kundene kan laste ned en kopi av den originale samsvarserklæringen (DoC) for vårt R&TTE utstyr fra vår DoC server: http://www.doc.panasonic.
SC-HTB770_RQT9849-B_mst.book 42 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.
SC-HTB770_RQT9849-B_mst.book 43 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 Limited Warranty (ONLY FOR AUSTRALIA) Panasonic Warranty 1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warranty period. 2.
SC-HTB770_RQT9849-B_mst.book 37 ページ ２０１３年２月２５日 月曜日 午前１１時５３分 For the United Kingdom and Ireland customers Sales and Support Information Customer Communications Centre ≥ For customers within the UK: 0844 844 3899 ≥ For customers within Ireland: 01 289 8333 ≥ Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays). ≥ For further support on your product, please visit our website: www.panasonic.co.
