Operating Instructions

22
TQBM0479
∫ BERLIN PHILHARMONIC HALL MODE*
1
Reproduce sound field of the concert hall
“Philharmonie”, which is home to the Berlin
Philharmonic.
≥ This works only when the input selected is “TV”, “HDMI 1”,
or “HDMI 2”.
≥ This has an effect only on PCM sound sources.
∫ SUBWOOFER
You can adjust the amount of bass.
Of the levels “LEVEL 1” to “LEVEL 4”, the effect
increases the higher the level number.
∫ CLR DIALOG*
1
You can change the level of dialogue clarity when
you want to emphasise people’s voices, etc.
Of the levels “LEVEL 1” to “LEVEL 4”, the effect
increases the higher the level number.
If the sound becomes unnatural, select “OFF”.
≥ For DTS:X
®
content, change the level using “DTS:X
DIALOG CONTROL”.
∫ DTS:X DIALOG CONTROL*
1
*
3
You can change the level of dialogue clarity when
you want to emphasise people’s voices, etc.
This has an effect only when playing back DTS:X
®
content.
Of the levels “LEVEL 0” to “LEVEL 6”, the effect
increases the higher the level number.
∫ DUAL AUDIO*
1
*
3
Sets the preferred audio channel mode when
there are two audio modes received by this
system.
M1: Main
M2: Secondary
M1+M2: Main + Secondary
This effect only works if the audio output of the TV
or player is set to “Bitstream” and “Dual Mono” is
available in the sound source.
∫ DRC*
1
*
3
You can listen at low volumes but still hear
dialogue clearly.
If the sound becomes unnatural, select “OFF”.
≥ When playing back “Dolby TrueHD” audio, if “AUTO” is
selected, then depending on the content, the effect output
may be the one when “ON” is selected.
≥ This function is enabled only when Dolby Audio
TM
(Dolby
Digital, Dolby Digital Plus, or Dolby TrueHD), Dolby
Atmos
®
, or DTS
®
signals are being input.
∫ AGC
Auto gain control prevents sudden loud sound by
reducing the sound level automatically when the
input is too high.
This function is suitable for TV broadcast that has
sound level difference.
If the sound becomes unnatural, select “OFF”.
∫ LOW VOL MODE*
1
Enhance the dialogue in low volume condition.
Select “OFF” to cancel this effect if the dialogue
does not sound natural in low volume condition.
∫ WALL MOUNT
Select the appropriate speaker placement mode
to suit your placement method. This system will
adjust the sound effect according to the
placement mode setting.
ON: For wall mounting layout
OFF: For table top layout
≥ The default setting is “OFF”.

≥ Changed settings will be kept until it is changed again,
unless otherwise indicated.
*1 Other sound field settings cannot be changed when
“BERLIN PHILHARMONIC HALL MODE” is “ON”.
*2 If “SOUND MODE” is set to “STRAIGHT”, “3D
SURROUND” does not work.
*3 Effects are disabled when the input selected is
“BLUETOOTH” or “NETWORK”. It is also not possible to
change the settings.
You can view the current audio format.
Press and hold [SOUND] for more than 4 sec.

≥ The audio format is displayed for about 3 seconds.
≥ No audio format is displayed if input to this unit is
Bluetooth
®
or the network.
Audio format
SC-HTB900-EGEBGN-TQBM0479_eng.book 22 ページ ２０１９年１０月１５日 火曜日 午後３時１２分