Operation Manual
RQT9478
14
Connecting the wireless surround speakers
Connection
How to insert the digital transmitter
1
Press the dents on both sides with
force.
2
Remove the cover.
3
Insert fi rmly with the label side (with 4 screws)
facing front.
Digital
transmitter
(SH-FX70)
Label
Dent
• Use care because the cover
may pop out.
• Turn off this system before making any connections.
• To connect equipment, refer to the appropriate operating instructions.
Connecting the wireless surround speakers
The surround speakers are not included.
You can connect left and right surround speakers wirelessly by using Panasonic SH-FX70 (a set consisted of a digital transmitter
and a wireless system sold separately) with the system.
To use these options, insert the digital transmitter into the system’s digital transmitter terminal and connect surround speakers to
SH-FX70’s wireless system. See SH-FX70’s operating instructions for details.
See page 17 for sound fi eld effects when the wireless surround speakers are connected.
Surround speakers (left, right): Place them slightly at the back right and left of the listening-viewing position.
Setup example
When connecting the speaker system SB-HS100A (not included)
• Keep the cover
in a safe place
after removal.
Surround
speaker (right)
Wireless system
(SH-FX70)
approx.
120°
Surround
speaker (left)
This system
Setup of the surround speakers SH-FX70 is necessary to install the surround speakers.
SH-FX70 (not included) is
a combined unit of digital
transmitter and wireless system.
The surround speakers (left and right) are not
included.
Note
Set the distance from each speaker to the listening-viewing position. (➜ page 21)
You can adjust the delayed time of the sound arriving at the listening-viewing position.
Note
When the system is turned on (➜ page 16) after the digital transmitter is inserted, the digital transmitter is detected and “ ” lights
up on the display.
(Blinks during detecting operation and lights when detected.)
W
“ ” lights on while the digital transmitter is inserted, but in the following cases, it goes off or fl ashes.
OFF: When the surround playback using the wireless surround speakers is not possible such as when the playback mode is
stereo (2-channel) or the multi-channel broadcasting including digital terrestrial broadcasting (DTTV) is received.
Flashing: When electric waves are cut off (When SH-FX70 is off)
W
W
Display