Operating instructions
RQT6683
16
Listening operations
A
B
1
2
5
CD
CD
7
3
4
3
2
1
SLEEPSLEEP
CLOCK
TIMER
PLAY
REC
AUTO OFFUTO OFF
DISC
PLAY MODEY MODE
MUTING
REW
S.SOUND EQS.SOUND EQ
DIMMER
DISPLAY
PRESET EQPRESET EQ
FF
1
23
4
65
7
89
PGM
10
VOL
VOL
AUX
TUNER/
BAND
TAPE
0
CLEARCLEAR
5
4
CD
/
REW
,
/
FF
1 7
PGM
1
23
4
5
1
23
4
65
7
89
10
0
CLEAR
DISC
CDs
Program play
By remote control only
This function allows you to program up to 24 tracks.
1 Press [CD 2/ J ] and then [L CLEAR].
2 Press [PGM].
3 Press [DISC].
4 (within 10 seconds or so)
Press [1] – [5] to select the disc you want.
5 Press the numeric button(s) to select the
track you want to play in the desired
sequence.
6 Repeat steps 3 through 5 until you have
programmed all the tracks you want.
7 Press [CD 2/ J ].
Play will start in the programmed sequence.
To cancel program play mode
Press [PGM] in the stop mode.
Programmed contents will be saved in memory.
To clear all programmed tracks
Press [L CLEAR] in the stop mode. “CLEAR” is displayed.
To select a two-digit track
Press [
10] and then the two numbers you want.
A When “CD FULL” appears
The number of programmed tracks is limited to 24. No
further tracks can be programmed.
B You can do the following during program mode:
• Check program contents.
Press [g
44
44
4/REW] or [f
33
33
3/FF].
Every time you press one of the buttons, the track and
program No. are shown on the display.
• Add to the program.
Repeat steps 3 through 5.
Memory retention
Your program is retained in memory for about 1 week while
the system is unplugged.
To replay your program
If you turned OFF your program with [PGM], you can play it
again as explained below.
1. Press [PGM].
2. Press [CD 2/ J].
If you program a track not on your CDs
The track is initially programmed, but during program play,
the player will skip that track and will continue playing from
the next programmed item.
Note
• During program play, you can search forward or backward
only within the current track.
• During program play, skipping is always in the programmed
order, whether forward or backward.
Specified track
number
Program order
Indicates program mode
RQT6683(11-20)NEW.P65 3/24/05, 10:20 AM16