Operating instructions

RQT6683
19
Listening operations
2
2
A
B
C
DEMOSTOP
,
2
DEMOSTOP
,
2
REC
REC
SLEEPSLEEP
CLOCK
TIMER
PLAY
REC
AUTO OFFUTO OFF
DISC
PLAY MODEY MODE
MUTING
REW
S.SOUND EQS.SOUND EQ
DIMMERDIMMER
DISPLAY
PRESET EQPRESET EQ
FF
1
23
4
65
7
89
PGM
10
VOL
VOL
CD
AUX
TUNER/
BAND
TAPE
0
CLEARCLEAR
PLAY MODE
Recording operations
Recording from the radio
Preparation: Do the preparatory steps (\ page 18).
1 Tune to the required station.
(\ page 10 or 11)
2 Press [[/ J REC] to start recording.
To stop recording
Press [STOP L, –DEMO].
To stop recording temporarily
Press [[/ J REC].
To resume recording, press [[/ J REC].
To cut an unnecessary part while recording
1. Press [[/J REC] during the unnecessary part. The
cassette deck will go into the stop mode.
2. Press [[/ J REC] to resume recording again.
To record on the other side of the tape
Turn the tape over and press [[/ J REC].
Note
When recording an AM broadcast, sound is momentarily
interrupted when you start and stop the recording.
B To reduce noise while recording an AM broadcast
(Beat proof function)
By remote control onlyly
Press and hold [PLAY MODE] while recording.
Every time you press the button:
BP1 BP2
Select the position where there is less noise.
C Recording CDs
You can use 1-DISC/ALL-DISC mode (A page 14) to make
recordings.
Preparation:
Do the preparatory steps (A page 18).
Insert the CD(s) you want to record (A page 12).
1-DISC/ALL-DISC recording
1 Do steps 1 to 4 on page 14.
Ensure CD is stopped.
2 Press [[/ J REC] to start recording.
The CD starts.
To stop recording
Press [STOP L, –DEMO].
CD play stops automatically.
To stop recording temporarily
Press [[/ J REC].
To resume recording, press [[/ J REC].
If the tape finishes before the CD
The CD continues playing. Press [STOP L, –DEMO] to stop
it.
To record programmed tracks
Program the tracks (A page 16).
Press [[/ J REC] to start recording.
Play starts.
To stop recording, press [STOP L, –DEMO].
Disc play stops automatically.
A
RQT6683(11-20)NEW.P65 3/24/05, 10:20 AM19