Operating Instructions

TQBM0933

D:\A_Job\PSG\_FY22\SC-PM270\Source\woi\PM272EB.EG_TQBM0933_EN.fm

Sleep timer

The sleep timer switches off the system after the set time.

1 Press [SETUP] repeatedly to select “SLEEP”.

2 Press [R, T] to select the setting (in minutes) and then press [OK].

To cancel, select “OFF”.

Note:

• The remaining time is always shown on the display. The display changes temporarily when you perform other

operations.

• The sleep timer always comes first. Be sure not to set an overlap of timers.

Others

Auto off

This system automatically switches off when you do not use it for approximately 20 minutes.

1 Press [SETUP] repeatedly to select “AUTO OFF”.

2 Press [R, T] to select “ON” and then press [OK].

To cancel, select “OFF”.

Note:

This function does not work when you are in radio source or when a Bluetooth

device is connected.

Bluetooth

standby

This function automatically switches on the system when you establish a Bluetooth

connection from a

paired device.

1 Press [SETUP] repeatedly to select “BLUETOOTH STANDBY”.

2 Press [R, T] to select “ON” and then press [OK].

To cancel, select “OFF”.

Note:

Some devices may take longer to respond. If you are connected to a Bluetooth

device before switching off the

system, wait for a minimum of 5 seconds before connecting to this system from your Bluetooth

device again.

Software updates

Occasionally, Panasonic may release updated software for this system that may add or improve the way

a feature operates. These updates are available free of charge.

For more details, refer to the following website.

https://panasonic.jp/support/global/cs/

(This site is in English only.)

█

Checking the software version

1 Press [SETUP] repeatedly to select “SW VER.” and then press [OK].

The software version is shown.

2 Press [OK] again to exit.

SLEEP 30 SLEEP 60 SLEEP 90 SLEEP 120

OFF

PM272EB.EG_TQBM0933_EN.fm Page 23 Wednesday, August 30, 2023 4:20 PM