Operating Instructions

TQBM0736
8
8
ENGLISH
Bluetooth
®
operations
By using the Bluetooth
®
connection, you can listen to the
sound from the Bluetooth
®
audio device from this system
wirelessly.
• Refer to the operating instructions of the Bluetooth
®
device for details.
Preparation
• Turn on the Bluetooth
®
feature of the device and place
the device near this unit.
1 Press [ ] to select “BLUETOOTH”.
If “PAIRING” is indicated on the display, go to step 3.
2 Press [PLAY MENU] to select “PAIRING” and
then press [OK].
• Alternatively, press and hold
[SELECTOR - PAIRING] on the unit.
3 Select “Panasonic PMX802-****” from the
Bluetooth
®
device’s Bluetooth
®
menu.
• [PMX802M] Displayed as “Panasonic PMX802M-****”.
• The MAC address (e.g., alpha-numerical string that is
unique to each set) may be displayed before this unit is
displayed.
• The name of the connected device is indicated on the
display for a few seconds.
4 Start playback on the Bluetooth
®
device.
1 Press [ ] to select “BLUETOOTH”.
“READY” is indicated on the display.
2 Select “Panasonic PMX802-****” from the
Bluetooth
®
device’s Bluetooth
®
menu.
[PMX802M] Displayed as “Panasonic PMX802M-****”.
The name of the connected device is indicated on
the display for a few seconds.
3 Start playback on the Bluetooth
®
device.
Note:
• If prompted for the passkey, input “0000”.
• You can register up to 8 devices with this unit. If a 9th
device is paired, the device that has not been used for the
longest will be replaced.
• This unit can only be connected to one device at a time.
• When “BLUETOOTH” is selected as the source, this unit
will automatically try and connect to the last connected
Bluetooth
®
device. (“LINKING” is indicated on the display
during this process.) If the connection attempt fails, try to
establish a connection again.
You can change the transmission mode to prioritise
transmission quality or sound quality.
Preparation
• Press [ ] to select “BLUETOOTH”.
• If a Bluetooth
®
device is already connected, disconnect
it.
1 Press [PLAY MENU] repeatedly to select
“LINK MODE”.
2 Press [2, 1] to select the mode and then press
[OK].
MODE 1: Emphasis on connectivity
MODE 2: Emphasis on sound quality
Note:
• Select “MODE 1” if the sound is interrupted.
• The factory default is “MODE 2”.
1 While a Bluetooth
®
device is connected:
Press [PLAY MENU] repeatedly to select
“DISCONNECT?”.
2 Press [ 2, 1] to select “OK? YES” and then press
[OK].
Note:
• You can also disconnect the Bluetooth
®
device by pressing
and holding [SELECTOR - PAIRING] on the unit.
• The Bluetooth
®
device will be disconnected if a different
audio source (e.g., “CD”) is selected.
Media information
• Please be aware that Panasonic accepts no
responsibility for the loss of data and/or information.
• This unit does not guarantee connection with all USB
devices.
• FAT16 and FAT32 file systems are supported.
• This unit supports USB 2.0 High Speed.
• USB devices with storage capacity of more than 32 GB
cannot work in some conditions.
• Connect a USB device with a thickness of 8 mm or
less.
• USB devices may not be recognised by this unit when
connected using the following:
– a USB hub
– a USB extension cable
• It is not possible to use USB card reader/writers.
• Supported file formats and extensions:
MP3 (“.mp3”), AIFF (“.aiff”), FLAC (“.flac”),
WAV (“.wav”), AAC (“.m4a”), DSD (“.dff”, “.dsf”)
• Depending on how you create the files, they may not
play in the order you numbered them or may not play
at all.
• Not all files on the USB device may be read if there are
some files not supported.
Note:
• Files are defined as tracks and folders are defined as
albums.
• This system can access up to:
- 800 albums (including root folder)
- 8000 tracks
- 999 tracks in one album
• This system can play back discs that conform to the
CD-DA format.
• This system can play back CD-R/RW with CD-DA or
MP3 format content.
• The unit may not be able to play some discs due to the
condition of the recording.
• Before playback, finalise the disc on the device it was
recorded on.
• If the disc includes both MP3 and normal audio data
(CD-DA), the unit plays the type recorded in the inner
part of the disc.
• This unit cannot play files recorded using packet write.
• Disc must conform to ISO9660 level 1 or 2 (except for
extended formats).
Connecting via Bluetooth
®
menu
Pairing with Bluetooth
®
devices
Connecting a paired Bluetooth
®
device
Bluetooth
®
transmission mode
Disconnecting a Bluetooth
®
device
Compatible USB devices
Compatible CD
SC-PMX802_E_GN_TQBM0736-2_eng_fre.book 8 ページ ２０２３年２月９日 木曜日 午前１０時５２分