Operating Instructions

TQBM0358
8
Media playback controls
The following marks indicate the availability of the feature.
Preparation
• Turn the unit on.
• Insert the media or connect the Bluetooth
®
device.
• Press [CD/USB] or [ ] to select the audio source.
Note:
• There will be no sound in search operation when playing
DSD files at USB selector.
• To use this unit’s remote control with a Bluetooth
®
device,
the Bluetooth
®
device must support AVRCP (Audio Video
Remote Control Profile).
Depending on the status of the device, some controls may
not work.
•
[CD] [USB]:Tracks can be selected by pressing the numeric
buttons.
You can display the track, artist, album name, file type,
bit rate, and other information. (The information varies
depending on the audio source.)
Press [DISPLAY] repeatedly.
e.g. [USB] (MP3)
Note:
• Maximum characters that can be shown:
approximately 32
• This system supports ver. 1 and 2 ID3 tags.
• Text data that the system does not support can show differently.
1 Press [PLAY MENU] to select “PLAYMODE” or “REPEAT”.
2 Press [ 2 , 1 ] to select the setting and then press [OK].
Note:
• During random playback, you cannot skip to tracks which
have been played or press the numeric buttons.
• Playmode function does not work with “Programme
playback”.
• The mode is cancelled when you open the disc tray or
remove the USB device.
This function allows you to programme up to 24 tracks.
[CD] (CD-DA)
1 Press [PROGRAM] in the stop mode.
“PROGRAM” is shown for a few seconds.
2 Press the numeric buttons to select the desired
track.
Do this step again to programme other tracks.
3 Press [1/;] to start playback.
[CD] (MP3), [USB]
1 Press [PROGRAM] in the stop mode.
“PROGRAM” is shown for a few seconds.
2 Press [3, 4] to select the desired album.
3 Press [9] and then press the numeric buttons
to select the desired track.
4 Press [OK].
Do steps 2 through 4 again to programme other
tracks.
5 Press [1/;] to start playback.
Note:
• The programme memory is cleared when you open the
disc tray or remove the USB device.
[CD]: CD audio in CD-DA format or a CD that
contains MP3 files
[USB]: USB devices containing MP3/AIFF/FLAC/
WAV/AAC/DSD files
[Bluetooth]:
Connected Bluetooth
®
device
Basic controls [CD] [USB] [Bluetooth]
Play Press [1/;].
Stop Press [∫].
• [USB]: The position is memorised and
“RESUME” is displayed.
• [USB]: Press [∫] twice to stop the
playback fully.
Pause Press [1/;].
Press again to continue playback.
Skip Press [:] or [9] to skip track.
(main unit: [:/6] or [5/9])
[CD] [USB] : Press [ 3 ] or [ 4 ] to skip the
MP3/AIFF/FLAC/WAV/AAC/DSD
album.
Search During play or pause
Press and hold [6] or [5].
(main unit: [:/6] or [5/9])
Viewing available information [CD] [USB]
[Bluetooth]
“A”: Album number
“T”: Track number
(“  ” stands for a number.)
“”:Album “”:Track
Play menu [CD] [USB]
PLAYMODE
OFF
PLAYMODE
Cancels the play mode setting.
1-TRACK Only plays the selected track.
• “1”, “ ” is displayed.
(Skip to the desired track.)
1-ALBUM Only plays the selected MP3/AIFF/
FLAC/WAV/AAC/DSD album.
• Press [3] or [4] to select the MP3/
AIFF/FLAC/WAV/AAC/DSD album.
• “1”, “ ” is displayed.
RANDOM Plays the contents randomly.
• “RND” is displayed.
1-ALBUM
RANDOM
Plays the tracks in the selected MP3/AIFF/
FLAC/WAV/AAC/DSD album randomly.
• Press [3] or [4] to select the MP3/
AIFF/FLAC/WAV/AAC/DSD album.
• “1”, “ ”, “RND” is displayed.
REPEAT
ON REPEAT Turns on repeat mode.
•“`” is displayed.
OFF REPEAT Turns off repeat mode.
Programme playback [CD] [USB]
Check
programme
contents
Press [:] or [9] in the stop
mode.
Clear the last
track
Press [DEL] in the stop mode.
Cancel
programme
mode
Press [PROGRAM] in the stop
mode.
• “PGM OFF” is shown for a few
seconds.
Clear all
programmed
tracks
Press [∫] in the stop mode. “CLEAR
ALL” is shown. Within 5 seconds,
press [∫] again.
SC-PMX90-92-EGEBGN~TQBM0358-1.book 8 ページ ２０２２年６月１日 水曜日 午後３時１６分