Setup Guide Operating Instructions DVD Home Theater Sound System Model No. SC-PT350W Preparing the remote control Placement of speakers Wireless system connection Simple setup Connect to the power supply. Connect to the antenna. Connect to the speakers. Connect to the various television terminals. Performing QUICK SETUP Operating other equipment Once all the connections are completed, kindly read the Operations Guide for playback operations. EB RQTX0060-B_Out_new3.
Accessories Please check and identify the supplied accessories. 1 Remote control (N2QAYB000093) 2 Remote control batteries 1 FM indoor antenna (RSA0007-L) 2 AC mains leads (K2CT3CA00004) 1 Antenna plug adaptor (K1YZ02000013) 1 Sheet of speaker cable stickers Preparing the remote control 1 Insert so the poles (+ and –) match those in the remote control. R6/LR6, AA Mishandling of batteries can cause electrolyte leakage which can severely damage the remote control.
Placement of speakers Setup example Place the front, center, and surround speakers at approximately the same distance from the seating position. The angles in the diagram are approximate. 1 2 3 FRONT (L, R) SURROUND (L, R) CENTER 5 Main unit (with digital transmitter) 4 5 SUBWOOFER WIRELESS SYSTEM 7 Avoiding interference To avoid interference, maintain the following distances between the wireless system and other electronic devices that use the same radio frequency (2.4 GHz band).
Placement of speakers (continued) Use only supplied speakers • Using other speakers can damage the unit, and sound quality will be negatively affected. • Place speakers on flat secure bases. Take proper precautions to prevent the speakers from falling if you cannot set them up on an even surface. • Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains.
Wireless system connection Connect the surround speaker cables to the wireless system L R Do not insert the wires beyond the wire insulation (\ page 6). Click! +: White −: Blue SURROUND Rch 4 SURROUND (R) 4 SURROUND Lch Rear panel of this unit 3 SURROUND (L) 3 Connecting the wireless system to the power supply Conserving power The wireless system consume a small amount of power when it is in off mode (approx. 0.3 W).
Simple setup Making the connections Connect the AC mains lead only after all other connections have been made. • Ensure that you have the complete accessories before making the connections. Conserving power The main unit consumes a small amount of power, even when it is standby mode (approx. 0.8 W). To save power when the unit is not to be used for a long time, unplug it from the household mains socket. You will need to reset some memory items after plugging in the unit. Connect to the antenna.
Connect to the various television terminals. • Do not connect the unit through a video cassette recorder. • Due to copy guard protection, the picture may not be displayed correctly. • Turn the television off before connecting, and refer to the television’s operating instructions.
Performing QUICK SETUP The QUICK SETUP screen assists you to make necessary settings. To display the picture from this main unit, switch on the television and change the television’s input mode which is connected to this main unit (example: VIDEO 1, AV 1, etc.). To change your television’s input mode, refer to its operating instructions. • This remote control is able to perform some basic television operations (\ page 38, Operations Guide). 2 1 3 Select “DVD/ CD”.
Operating other equipment Optional antenna connection Use the outdoor antenna if radio reception is poor. FM outdoor antenna (Using a television antenna) FM outdoor antenna (not included) Rear panel of this main unit 75 coaxial cable (not included) Antenna plug adaptor (included) • Disconnect the FM indoor antenna. • The outdoor antenna should be installed by a competent technician. Note • Disconnect the outdoor antenna when the unit is not in use.
Operating other equipment (continued) Optional connection for set top box Set top box (not included) Television (not included) Rear panel of this main unit SCART cable (not included) Optical-In for 5.1 ch surround This unit can decode the surround signal from the set top box. Press [EXT-IN] to select “D-IN” audio input on the remote control. • Optical input settings (\ page 38, Operations Guide) Optical digital audio cable (not included) • Do not bend sharply when connecting.
Connecting with your HDMI-compatible television and set top box • Do not use the SCART cable when the HDMI cable is being used for connection. • When the HDMI cable is connected, there will be no video output from the SCART and COMPONENT VIDEO OUT terminals of the main unit. • Do not connect any kind of audio/video distribution devices between this unit and the television (such as an amplifier, etc.). • Set “Video Mode” to “On” and “Audio Output” to “On” (\ page 27, “HDMI” tab, Operations Guide).
Matsushita Electric Industrial Co., Ltd. Web Site: http://panasonic.net En RQTX0060-B L0307NC0 RQTX0060-B_Out_new3.
