Operating Instructions

6
TQBJ2186
6
Overview of controls
Do the procedures with the remote control. You can also use the buttons on the unit if they are the same.
A Standby/on switch [`], [1]
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still consuming
a small amount of power.
When the unit
’s power source is other than household
mains socket, press
[1] on the unit to switch it on.
B Decrease the brightness of the display panel
The illumination is also switched off.
To cancel, press the button again.
C Select the audio source
Press [SELECT <, >] (unit: [SELECT]) repeatedly to
select the source:
On the unit:
To start Bluetooth
®
pairing, press and hold [ ].
D Basic playback control
E View the setup menu
F View the content information
G Select or confirm the option
H Set the sleep timer
I Adjust the volume level
On the unit:
Press [VOL] and then turn [VOLUME/MULTI
CONTROL] to adjust the volume.
Adjust the microphone volume level
Press and hold [–MIC VOL] until “MIC VOL” is shown.
Turn [VOLUME/MULTI CONTROL] to adjust the
volume.
J Mute the sound
To cancel, press the button again.
“MUTE” is also cancelled when you adjust the volume
or when you switch off the system.
K View the play menu
L Select the sound effects
USB
AUXBLUETOOTH
CD FM
D-IN
SC-TMAX10E_TQBJ2186 (01) En.fm Page 6 Wednesday, June 1, 2022 1:26 PM