Operating Instructions

74
VQT3E82
Playback
Editing
4
Copying between SD card and
Built-in Memory/HDD
[SDR-T70]/[SDR-H100]/[SDR-H101]
Still pictures recorded with this unit can be copied between an SD card inserted in this unit
and a built-in memory/HDD.
Motion pictures cannot be copied to SD card directly, can only be copied to PC.
Confirming remaining capacity on the copy destination
The amount of space left on the SD card, the built-in memory and HDD can be checked.
Depending on the media condition, some remaining capacity of the SD card, built-in
memory or HDD may not be used.
If the remaining capacity on a single SD card is not enough, you can copy to multiple SD
cards following the instruction on the screen.
¬ Change the mode to .
Select the menu. (l 25)
Current media information will be displayed.
Press the centre of the joystick to switch display between SD card and built-in memory.
/
Press the centre of the joystick to switch display between SD card and HDD.
Press the MENU button to end.
The SD card, built-in memory or built-in HDD requires some space to store information and
manage system files, so the actual usable space is slightly less than the indicated value.
The usable built-in memory/HDD space is generally calculated as 1 GB=1,000,000,000
bytes. The capacities of this unit, PCs and software are expressed as
1 GB=1,024k1,024k1,024=1,073,741,824 bytes. Therefore, the indicated value of the
capacity appears to be smaller.
[SETUP] # [MEDIA STATUS]
SDR-T70
SDR-H100
SDR-H101
SDRS70&T70&H100EB-VQT3E82_mst.book 74 ージ 2010年12月1日 水曜日 午後2時52