Operating Instructions

95
VQT3E82
≥ When the unit is connected to a PC it
cannot be turned off.
Disconnect the USB cable, before
turning this unit off.
≥ Do not disconnect the USB cable or the
AC adaptor while the access lamp is on or
card access icon ( ) appears on the
unit screen.
≥
Do not disconnect the USB cable or the
AC adaptor while the access lamp is on or
Built-in memory access icon ( )
appears on the unit screen.
≥ /
Do not disconnect the USB cable or the
AC adaptor while the HDD access lamp is
on or HDD access icon ( ) appears on
the unit screen.
≥
When performing reading/writing between a
PC and an SD card, be aware that some SD
card slots built into PCs and some SD card
readers are not compatible with the SDHC
memory card or SDXC memory card.
∫ To disconnect USB cable
safely
1 Double click the icon in task tray
displayed on the PC.
≥ Depending on your PC’s settings, this
icon may not be displayed.
2 Select [USB Mass Storage Device]
and click [Stop].
3
Verify [MATSHITA SDR-S70/SD USB
Device] is selected and click [OK].
Verify [MATSHITA SDR-T70/SD USB
Device] or [MATSHITA SDR-T70/MEM
USB Device] is selected and click
[OK].
Verify [MATSHITA SDR-H100/SD USB
Device] or [MATSHITA SDR-H100/
HDD USB Device] is selected and
click [OK].
Verify [MATSHITA SDR-H101/SD USB
Device] or [MATSHITA SDR-H101/
HDD USB Device] is selected and
click [OK].
SDR-T70
SDR-H100
SDR-H101
SDR-S70
SDR-T70
SDR-H100
SDR-H101
SDRS70&T70&H100EB-VQT3E82_mst.book 95 ページ ２０１０年１２月１日 水曜日 午後２時５２分