VQT0T50_PP_ENG.book 1 ページ 2005年8月31日 水曜日 午後2時25分 Operating Instructions SD Video Camera Model No. SDR-S100 Before connecting, operating or adjusting this product, please read the instructions completely. For USA assistance, please call: 1-800-272-7033 or, contact us via the web at: http://www.panasonic.com/contactinfo For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.
VQT0T50_PP_ENG.book 2 ページ 2005年8月31日 水曜日 午後2時25分 Before opening the CD-ROM package, please read the following. End User License Agreement You (“Licensee”) are granted a license for the Software defined in this End User License Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co., Ltd.
VQT0T50_PP_ENG.book 3 ページ 2005年8月31日 水曜日 午後2時25分 Contents End User License Agreement ............ 2 Preparation Image stabilizer function .................. 41 This is for reducing image shakes during recording. MagicPix functions ........................... 42 This allows recording in dark locations. Information for your safety ................ 5 Introduction ......................................... 7 Accessories ......................................... 9 Parts identification and handling ....
VQT0T50_PP_ENG.book 4 ページ 2005年8月31日 水曜日 午後2時25分 Contents (continued) PC Others With a PC............................................73 Installing MotionSD STUDIO ............77 Installing the Web Camera Driver ....78 Connection and recognition procedures ......................................80 Using MotionSD STUDIO ..................82 Reading the MotionSD STUDIO operating instructions....................83 Using the unit as a Web Camera......83 To disconnect USB cable safely ......
VQT0T50_PP_ENG.book 5 ページ 2005年8月31日 水曜日 午後2時25分 Preparation Information for your safety WARNING TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES AND DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.
VQT0T50_PP_ENG.book 6 ページ 2005年8月31日 水曜日 午後2時25分 Information for your safety (continued) FCC Note: (U.S. only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
VQT0T50_PP_ENG.book 7 ページ 2005年8月31日 水曜日 午後2時25分 U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098, and 4,907,093. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited consumer uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
VQT0T50_PP_ENG.book 8 ページ 2005年8月31日 水曜日 午後2時25分 Introduction (continued) ∫ Cards that you can use with this unit On this unit, you can use SD Memory Cards of the following capacity (from 8 MB to 2 GB). 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB (Maximum) Please confirm the latest information on the following website. (This website is in English only.) http://panasonic.co.
VQT0T50_PP_ENG.book 9 ページ 2005年8月31日 水曜日 午後2時25分 Accessories Check the accessories before using this unit.
VQT0T50_PP_ENG.book 10 ページ 2005年8月31日 水曜日 午後2時25分 Parts identification and handling 3 1 2 4 5 6 1 2 3 4 5 6 7 Lens hood (P11) Lens cover Built-in flash (P54) Lens (LEICA DICOMAR) Remote Control Sensor (P13) Indication lamp (P32) Tripod mount (P11) 7 8 Zoom lever [W/T] (P36) Volume lever [rVOLs] (P58) 9 Record button (P33, 50) 10 Cursor button (P22) ≥ Press up, down, left or right to select items. ≥ Press the button in the center to enter the selection.
VQT0T50_PP_ENG.book 11 ページ 2005年8月31日 午後2時25分 26 LCD monitor (P21, 107) 26 29 30 31 水曜日 27 28 32 Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture.
VQT0T50_PP_ENG.book 12 ページ 2005年8月31日 水曜日 午後2時25分 Parts identification and handling (continued) Multi-connector [MULTI] Only connect the supplied multi cable and supplied headphone cable to this connector as the sound may not be output correctly if you connect other cords. ∫ Connecting headphones 1 (optional: ‰ 3.5 mm stereo mini plug) using the headphone cable (supplied) 2 MULTI 2 1 Hand strap fixture We recommend using the hand strap (supplied) to prevent the unit from dropping.
VQT0T50_PP_ENG.book 13 ページ 2005年8月31日 水曜日 午後2時25分 ∫ Install a button-type battery (supplied) in the remote control 1) While pressing the stopper 1, pull out the battery holder. 2) Set the button-type battery with its (i) mark facing upward 2 and get the battery holder back in place. 2 1 ∫ About the button-type battery ≥ When the button-type battery runs down, replace it with a new battery (CR2025). The battery typically lasts about one year; the actual life may be less with heavy use.
VQT0T50_PP_ENG.book 14 ページ 2005年8月31日 水曜日 午後2時25分 Inserting/Removing an SD card Before inserting/removing an SD card, be sure to turn the power [OFF]. (P18) If the SD card is inserted or removed with the power turned on, this unit may malfunction or the data recorded on the SD card may be lost. 1 Open the LCD monitor and then slide the card slot open lever 1 to open the card slot cover. 1 2 Insert/remove the SD card into/from the card slot 2.
VQT0T50_PP_ENG.book 15 ページ 2005年8月31日 水曜日 午後2時25分 ∫ About the SD Memory Cards that you can use SD card capacity Recording mode Motion picture recording mode 8 MB, 16 MB 32 MB, 64 MB, 128 MB 256 MB, 512 MB, 1 GB, 2 GB (Maximum) Cannot be used. Cannot be guaranteed in operation¢ Refer to page 34. Still picture recording mode Can be used. ¢ The recording may suddenly stop during motion picture recording. (P35) ∫ About the SD card ≥ Do not touch the terminals on the back of the SD card.
VQT0T50_PP_ENG.book 16 ページ 2005年8月24日 水曜日 午後4時44分 Inserting/Removing the Battery 1 Remove the battery cover. 1 1 While pushing the battery cover, 2 2 2 slide it in the direction of the arrow. Insert the battery. 1 A 3 1 Place the battery label side up. 2 Insert the projecting parts of the battery in the holes on the unit. 3 Put the battery cover back in its original place. A Label B Projecting parts 2 B Removing the battery Remove the battery cover, then remove the battery.
VQT0T50_PP_ENG.book 17 ページ 2005年8月31日 水曜日 午後2時25分 Charging the Battery When this unit is purchased, the battery is not charged. Charge the battery before using this unit. ¬ Set the power switch to [OFF]. (P18) Connect the AC adaptor (supplied) A B to this unit and the AC outlet. 1 Open this unit’s terminal cover. 2 Connect the AC adaptor to this unit’s DC input terminal [DC IN 9.3V]. 3 Connect the AC mains lead to the AC adaptor, then the AC outlet.
VQT0T50_PP_ENG.book 18 ページ 2005年8月31日 水曜日 午後2時25分 Turning the unit on/off How to turn on the power 1 Set the power switch to [ON]. The status indicator 1 lights red and, in motion picture recording mode or still picture recording mode (P20), the lens cover opens. ON OFF How to turn off the power ON Set the power switch to [OFF]. The status indicator goes out and the lens cover closes.
VQT0T50_PP_ENG.book 19 ページ 2005年8月31日 水曜日 午後2時25分 To cancel quick start Press the menu button, use the cursor button to select [ [ QUICK START]#[OFF]. (P26) ≥ To cancel quick start standby, turn off the power. ≥ Quick start standby is canceled after 5 minutes have elapsed. In this case, the unit cannot be quick-started and it takes longer for it to start operating.
VQT0T50_PP_ENG.book 20 ページ 2005年8月31日 水曜日 午後2時25分 Selecting a mode The Mode Dial is used to switch between recording and playback modes. Rotate the mode dial slowly but surely. Set the desired mode 1. Rotate the mode dial, and set the desired mode pictograph to the position shown in the illustration. PC 1 Motion picture SP 0h00m00s ; R 0h03m recording mode (P33) 15:42 Use this to record DEC 15 2005 motion pictures (MPEG2). The unit can be used as a Web camera when it is connected to a PC.
VQT0T50_PP_ENG.book 21 ページ 2005年8月31日 水曜日 午後2時25分 Using the LCD monitor Adjusting the monitor’s angle A B 90o 90o 1 90o 90o 2 180o 180o A When recording 1 Face-to-face 2 Normal B When playing back Rotating the LCD monitor beyond the angles given above may damage it.
VQT0T50_PP_ENG.book 22 ページ 2005年8月31日 水曜日 午後2時25分 Using the cursor button One-touch navigation This unit has a cursor button for selecting recording functions, performing playback operations, etc. so it is easy to operate this unit with one hand. Press the cursor button while simultaneously viewing the screen. Press the cursor button to operate the operation icons 1 and menu screen 2 appearing on the LCD monitor.
VQT0T50_PP_ENG.book 23 ページ 2005年8月31日 水曜日 午後2時25分 Using the recording function ¬ When the mode dial is at the 1 or position Press the button in the center. 1 An operation icon appears on the LCD monitor. 1 2 While an operation icon is displayed, a blue border appears around the outside of the button in the centre of the cursor button. ≥ Each time the button in the center is pressed, the indication changes. Press the cursor button up, down, left or right to make a selection.
VQT0T50_PP_ENG.book 24 ページ 2005年8月31日 水曜日 午後2時25分 Using the cursor button (continued) About the operation icons which are displayed Each time the button in the center is pressed while an operation icon is displayed, the indication changes as shown below. ¢ The operation icon is off. Motion picture recording mode ([AUTO/MANUAL/FOCUS] switch is set to [AUTO]) ([AUTO/MANUAL/FOCUS] switch is set to [MANUAL]) Motion picture playback mode ≥ The indication can also be changed during playback.
VQT0T50_PP_ENG.
VQT0T50_PP_ENG.book 26 ページ 2005年8月31日 水曜日 午後2時25分 Using the menu screen Refer to the “Menu list” (P89) for information about the menus. 1 Press the [MENU] button. BASIC ADVANCE SETUP SETUP 2 ENTER EXIT MENU The menu setting screen is displayed. (The menu displayed differs depending on the position of the mode dial.) ≥ Do not switch the mode dial when the menu is displayed. ≥ The menu screen is not displayed during recording and playback.
VQT0T50_PP_ENG.book 27 ページ 5 2005年8月31日 水曜日 午後2時25分 Press the cursor button right or press the button in the center. BASIC SCENE MODE WIND CUT XP SP LP REC MODE WIDE CLOCK SET SETUP ENTER EXIT MENU 6 Press the cursor button up or down in order to select the desired item. BASIC SCENE MODE WIND CUT XP SP LP REC MODE WIDE CLOCK SET SETUP ENTER EXIT MENU 7 or Press the button in the center to enter the selection or press the cursor button left to get back to the previous screen.
VQT0T50_PP_ENG.book 28 ページ 2005年8月31日 水曜日 午後2時25分 Setting date and time If the screen shows the incorrect date/time, then adjust it. ¬ Rotate the mode dial to select 1 SCENE MODE WIND CUT REC MODE SETUP YES NO EXIT ENTER MENU 2 CLOCK SET DEC 15 2005 SETUP SET ENTER 03 . Press the menu button, then use the cursor button to select [ BASIC]#[ CLOCK SET]# [YES].
VQT0T50_PP_ENG.book 29 ページ 2005年8月31日 水曜日 午後2時25分 Changing the date and time display style SETUP Press the menu button, select [ SETUP]#[ DATE/TIME], then use the cursor button to select the desired display style. (P26) 1/3 DISPLAY DATE/TIME OFF DATE FORMAT D/T FORMAT CARD QUICK START DATE SETUP ENTER EXIT ≥ The date and time display can also be changed by pressing the [DATE/TIME] button on the remote control.
VQT0T50_PP_ENG.book 30 ページ 2005年8月31日 水曜日 午後2時25分 Adjusting LCD monitor (continued) Changing the picture quality on the LCD monitor (LCD AI) Press the menu button, then use the SETUP cursor button to select 2/3 POWER SAVE [ SETUP]#[ LCD AI]# BEEP SOUND LCD AI NORMAL [DYNAMIC] or [NORMAL]. (P26) LCD SET INITIAL SET SETUP ENTER DYNAMIC – [DYNAMIC]: The image on the LCD monitor becomes clear and vivid. – [NORMAL]: Switches to the standard picture quality.
VQT0T50_PP_ENG.book 31 ページ 2005年8月31日 水曜日 午後2時25分 Recording Check before recording First, format the SD card if one which has been used on another device is going to be used for the first time on this unit. (P65) When the SD card is formatted, all of the recorded data (files) is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a PC or other device before proceeding with the formatting. When copying images recorded using this unit to a PC, you must use MotionSD STUDIO.
VQT0T50_PP_ENG.book 32 ページ 2005年8月31日 水曜日 午後2時25分 Check before recording (continued) ∫ About the indication lamp 1 The indication lamp flashes when signals from the remote control are sensed and during self-timer operation. When [ REC LAMP] in [ ADVANCE] is set to [ON], the lamp lights during recording. You can therefore confirm recording when this unit is attached to a tripod or when using the remote control.
VQT0T50_PP_ENG.book 33 ページ 2005年8月31日 水曜日 午後2時25分 Motion picture recording (MPEG2 motion pictures) Record motion pictures onto an SD card. 1 Rotate the mode dial to select . The lens cover now opens automatically. PC 2 Press the record button to start recording. Ending the recording Press the record button again. 1 [¥] and [;] are red during recording. 2 Do not move this unit until [;] is green.
VQT0T50_PP_ENG.book 34 ページ 2005年8月31日 水曜日 午後2時25分 Motion picture recording (MPEG2 motion pictures) (continued) Changing the recording mode of the motion picture Press the menu button, then use the 1 BASIC cursor button to select the desired recording mode by selecting [ BASIC]#[ REC MODE]. (P26) SCENE MODE WIND CUT REC MODE WIDE CLOCK SET SETUP ENTER XP SP LP EXIT MENU – XP : Motion pictures can be recorded with the highest picture quality.
VQT0T50_PP_ENG.book 35 ページ 2005年8月31日 水曜日 午後2時25分 ∫ When recording stops suddenly during motion picture recording When using an SD card on which data has been written many times and the data writing speed has reduced, the recording may suddenly stop during motion picture recording. At this time, the following message will appear: REC STOPPED. NOW WRITING. CARD MAY NOT BE SUITABLE. CHECK CARD.
VQT0T50_PP_ENG.book 36 ページ 2005年8月31日 水曜日 午後2時25分 Zoom in/out function This is for moving the zoom lever to adjust the magnification. You can make people and objects appear closer and landscapes can be recorded in wide angle. You can zoom in up to 10k optically. ¬ Rotate the mode dial to select 1 or . Move the zoom lever.
VQT0T50_PP_ENG.book 37 ページ 2005年8月31日 水曜日 午後2時25分 ∫ To use the zoom microphone function Interlocked with the zooming operation, the microphone will collect sounds clearly far away with the tele-shot or those in the vicinity with the wide-angle shot. ¬ Rotate the mode dial to select ADVANCE D.ZOOM O.I.S. MAGICPIX OFF REC LAMP ZOOM MIC SETUP . Press the menu button, then use the cursor button to select [ ADVANCE]>[ ZOOM MIC]>[ON].
VQT0T50_PP_ENG.book 38 ページ 2005年8月31日 水曜日 午後2時25分 Soft skin mode This makes skin colors appear softer for a more attractive appearance. This is more effective if you record the bust image of a person. ¬ Rotate the mode dial to select or . 1 Press the button in the center of the cursor button to display the icon shown in the illustration. 2 Press the cursor button down, then select the [ ] soft skin icon. ≥ The [ white.
VQT0T50_PP_ENG.book 39 ページ 2005年8月31日 水曜日 午後2時25分 Backlight compensation function This is for protecting a backlit subject from being darkened. Use this function when the light is emanating from behind the subject and the subject appears dark. ¬ Rotate the mode dial to select or . 1 Press the button in the center of the cursor button to display the icon shown in the illustration. 2 Press the cursor button right, then select the [ª] backlight compensation icon.
VQT0T50_PP_ENG.book 40 ページ 2005年8月31日 水曜日 午後2時25分 Wind noise reduction function This is for reducing the wind noise coming into the microphone when recording. ¬ Rotate the mode dial to select BASIC SCENE MODE WIND CUT OFF REC MODE ON WIDE CLOCK SET SETUP ENTER EXIT . Press the menu button, then use the cursor button to select [ BASIC]>[ WIND CUT]>[ON]. (P26) MENU To cancel the wind noise reduction function Press the menu button, then use the cursor button to select [ BASIC]>[ WIND CUT]>[OFF].
VQT0T50_PP_ENG.book 41 ページ 2005年8月31日 水曜日 午後2時25分 Image stabilizer function This is for reducing image shakes during recording. Reduces the image shaking due to hand movement when recording. ¬ Rotate the mode dial to select ADVANCE D.ZOOM O.I.S. OFF MAGICPIX ON REC LAMP ZOOM MIC SETUP ENTER or . Press the menu button, then use the cursor button to select [ ADVANCE]>[ O.I.S.]>[ON].
VQT0T50_PP_ENG.book 42 ページ 2005年8月31日 水曜日 午後2時25分 MagicPix functions This allows recording in dark locations. This function allows you to record color subjects in dark locations to stand out against the background. Attach this unit to a tripod, and you can record images free from vibration. ≥ Recorded scene is seen as if frames were missed. ¬ Rotate the mode dial to select ADVANCE D.ZOOM O.I.S. OFF MAGICPIX REC LAMP ZOOM MIC SETUP ENTER ON EXIT MENU .
VQT0T50_PP_ENG.book 43 ページ 2005年8月31日 水曜日 午後2時25分 Scene mode This is for recording in various situations. When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures. ¬ Rotate the mode dial to select 1 AUTO or . Set the [AUTO/MANUAL/FOCUS] switch to [MANUAL].
VQT0T50_PP_ENG.book 44 ページ 2005年8月31日 水曜日 午後2時25分 Scene mode (continued) Sports mode ≥ For slow-motion playback or playback pause of recorded scenes, this mode prevents camera shakes. ≥ During normal playback, the scene movement may not look smooth. ≥ Avoid recording under fluorescent light, mercury light or sodium light because the color and brightness of the playback scene may change.
VQT0T50_PP_ENG.book 45 ページ 2005年8月31日 水曜日 午後2時25分 Manual focus adjustment This allows subjects to be focused manually. If auto focusing is difficult due to the conditions, then manual focusing is available. ¬ Rotate the mode dial to select 1 AUTO or . Set the [AUTO/MANUAL/FOCUS] switch to [MANUAL]. MANUAL FOCUS 2 MNL Move the switch down and set it to the [FOCUS] position. ≥ The manual focus indication [1MF] will be displayed.
VQT0T50_PP_ENG.book 46 ページ 2005年8月31日 水曜日 午後2時25分 White balance This is for recording in natural colours. The automatic white balance function may not reproduce natural colours depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. ¬ Rotate the mode dial to select 1 MNL or . Set the [AUTO/MANUAL/FOCUS] switch to [MANUAL]. The icon shown in the illustration is displayed automatically.
VQT0T50_PP_ENG.book 47 ページ 2005年8月31日 水曜日 午後2時25分 To set the white balance manually MNL Select [ ] mode, fill the screen with a white subject and then press the cursor button up to select the [ ] indication. ≥ When the [ ] display changes from flashing to on, setting is complete. About flashing of the [ ] indication When the manual adjustment mode is selected ≥ Flashing indicates that the white balance previously adjusted is stored. This setting is stored until the white balance is adjusted again.
VQT0T50_PP_ENG.book 48 ページ 2005年8月31日 水曜日 午後2時25分 Manual shutter speed/aperture adjustment Shutter Speed Adjust it when recording fast-moving subjects. Aperture Adjust it when the screen is too bright or too dark. ¬ Rotate the mode dial to select 1 MNL or . Set the [AUTO/MANUAL/FOCUS] switch to [MANUAL]. The icon shown in the illustration is displayed automatically. 2 MNL 1//60 F2.
VQT0T50_PP_ENG.
VQT0T50_PP_ENG.book 50 ページ 2005年8月31日 水曜日 午後2時25分 Still picture recording (JPEG still pictures) For the number of still pictures to be recorded on an SD card, refer to P88. 1 Rotate the mode dial to select . The lens cover opens automatically. PC 2 Press the record button halfway (not all the way down) to bring the subject into focus. (In auto focusing mode only) 1 Shutter chance mark 2 Focus area 3 Shutter speed 4 Iris/gain 1/60 F2.
VQT0T50_PP_ENG.book 51 ページ 2005年8月31日 3 水曜日 午後2時25分 Press the record button all the way down (as far as it will go) to record. To record still pictures clearly ≥ When zooming in on the subject with a magnification of 4k to 10k, it is difficult to reduce the slight shaking from holding this unit by hand. We recommend decreasing the zoom magnification and approaching the subject when recording. ≥ You can record stable pictures without shaking by using a tripod and the remote control.
VQT0T50_PP_ENG.book 52 ページ 2005年8月31日 水曜日 午後2時25分 Still picture recording (JPEG still pictures) (continued) ∫ Number of pixels and picture quality for still picture recording PICTURE SIZE Changing the recording size 1 BASIC SCENE MODE 2048 PICTURE SIZE PICT.QUALITY 1280 CLOCK SET 640 HDTV SETUP ENTER EXIT MENU Press the menu button, use the cursor button to select [ BASIC]>[ PICTURE SIZE], then set the desired size.
VQT0T50_PP_ENG.book 53 ページ 2005年8月31日 水曜日 午後2時25分 ∫ About the shutter chance mark ≥ The shutter chance mark does not appear in manual focus mode. ≥ When the subject is not easily focused, focus on the subject manually. (P45) ≥ You can record still pictures on the SD card even if the shutter chance mark does not appear, but pictures may be recorded without being focused. ≥ The shutter chance mark does not appear or is difficult to display in the following cases. – When the zoom magnification is high.
VQT0T50_PP_ENG.book 54 ページ 2005年8月31日 水曜日 午後2時25分 Built-in flash Use the built-in flash in order to record still pictures in dark places. ¬ Rotate the mode dial to select 1 . Slide the [OPENß] flash lever. The flash rises. ≥ The flash will flash when the record button is pressed. Setting the flash mode ADVANCE 1/2 FLASH RED EYE FLASH LEVEL O.I.S. REC LAMP SETUP ENTER EXIT MENU Press the menu button, then use the cursor button to select [ ADVANCE]>[ß FLASH] and then select the desired setting.
VQT0T50_PP_ENG.book 55 ページ 2005年8月31日 水曜日 午後2時25分 To adjust the brightness of the flash ADVANCE 1/2 FLASH RED EYE FLASH LEVEL O.I.S. Press the menu button, use the cursor button to select [ ADVANCE]>[ FLASH LEVEL], then set the desired brightness level. (P26) REC LAMP SETUP ENTER EXIT MENU ≥ Do not accidentally press or cover the flash with your fingers when holding the camera. ≥ Store the flash when it is not being used.
VQT0T50_PP_ENG.book 56 ページ 2005年8月31日 水曜日 午後2時25分 Self-timer recording This is for recording using the timer. You can record still pictures on an SD card using the timer. ¬ Rotate the mode dial to select . 1 Press the button in the center to display the icon shown in the figure. 2 Press the cursor button left to select the [Ø] self-timer icon. The [Ø10] icon flashes orange, then lights white.
VQT0T50_PP_ENG.book 57 ページ 2005年8月31日 水曜日 午後2時25分 Playback Motion picture playback (MPEG2 motion pictures) 1 Rotate the mode dial to select PC 2 1 3/24 . The lens cover closes automatically. The motion pictures (up to 12 scenes) recorded on the SD card are displayed as thumbnails. Press the cursor button up, down, left or right to select the scene to be played back. 1 Scene number 2 Bar graph display The selected scene will be encircled by a red SETUP PLAY frame.
VQT0T50_PP_ENG.book 58 ページ 2005年8月31日 水曜日 午後2時25分 Motion picture playback (MPEG2 motion pictures) (continued) Slow-motion playback The motion pictures will be played back at a speed approx. 1/5 the normal speed. 1) Press the cursor button up during motion picture playback to pause the playback. 2) Keep pressing the cursor button right. (Slow-motion pictures will be played back in reverse when you keep pressing the cursor button left.) ≥Normal playback is restored when the cursor button up is pressed.
VQT0T50_PP_ENG.book 59 ページ 2005年8月31日 水曜日 午後2時25分 Playing back motion pictures by date PLAY SETUP PLAY MODE VIEW ALL REPEAT PLAY BY DATE RESUME PLAY LOCK SETUP ENTER EXIT MENU 01 DEC. 15. 2005 02 DEC. 16. 2005 ENTER ≥When [PLAY MODE] is set to [VIEW ALL], all recorded motion pictures will be played back in succession. ([ ALL] is displayed.) 2) Press the cursor button up or down to select the date for playback, then press the button in the center.
VQT0T50_PP_ENG.book 60 ページ 2005年8月31日 水曜日 午後2時25分 Still picture playback (JPEG still pictures) 1 Rotate the mode dial to select PC 2 1 3/24 . The lens cover closes automatically. The still pictures (up to 12 scenes) recorded on the SD card are displayed as thumbnails. Press the cursor button up, down, left or right to select the scene to be played back. 1 Scene number 2 Bar graph The selected scene will be encircled by a red SETUP PLAY frame.
VQT0T50_PP_ENG.book 61 ページ 2005年8月31日 水曜日 午後2時25分 Playing back still pictures as a slide show PLAY SETUP PLAY MODE PICTURE SLIDE SHOW LOCK DPOF SET SETUP ENTER EXIT MENU Press the menu button, then use the cursor button to select [ PLAY SETUP]#[ PLAY MODE]# [SLIDE SHOW]. (P26) ≥ Still pictures will not be played as a slide show when [PICTURE] is selected.
VQT0T50_PP_ENG.book 62 ページ 2005年8月31日 水曜日 午後2時25分 Deleting scenes This is for deleting scenes recorded on SD cards. The deleted scenes cannot be restored. ∫ Deleting multiple files from the thumbnail display. ¬ Rotate the mode dial to select or . 1 Press the menu button, then use the cursor button to select [ DELETE]#[ SELECT] or [ ALL].
VQT0T50_PP_ENG.book 63 ページ 2005年8月31日 ∫ Deleting scenes one at a time ¬ Rotate the mode dial to select 1 or 水曜日 午後2時25分 . Press the [ playback. ] button during DELETE SCENE? YES NO SETUP ENTER 2 DELETE SCENE? YES NO SETUP ENTER When the confirmation message appears, use the cursor button to select [YES], then press the button in the center. ≥ To stop deleting, select [NO].
VQT0T50_PP_ENG.book 64 ページ 2005年8月31日 水曜日 午後2時25分 Locking scenes This is for preventing scenes from being deleted by mistake. Scenes recorded on an SD card can be locked so that they may not be deleted by mistake. (However even if you lock some scenes on an SD card, formatting the card will delete all the scenes.) ¬ Rotate the mode dial to select 1 PLAY MODE YES DPOF SET NO SETUP ENTER EXIT MENU 2 LOCK SETUP 1/24 ENTER .
VQT0T50_PP_ENG.book 65 ページ 2005年8月31日 水曜日 午後2時25分 Formatting an SD card This is for initializing (formatting) cards. Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased. Store important data on a PC, etc. When saving scenes recorded using this unit to a PC, you must use MotionSD STUDIO. (P73) ¬ Rotate the mode dial to select 1 SETUP 1/2 DISPLAY DATE/TIME DATE FORMAT YES FORMAT CARD POWER SAVE SETUP , or .
VQT0T50_PP_ENG.book 66 ページ 2005年8月31日 水曜日 午後2時25分 DPOF setting This is for writing the printing data on an SD card. You can write the data of pictures to be printed, number of copies, and other information (DPOF data) onto the SD card. ¬ Rotate the mode dial to select 1 PLAY SETUP PLAY MODE LOCK DPOF SET NO SET . Press the menu button, then use the cursor button to select [ PLAY SETUP]#[ DPOF SET]# [SET].
VQT0T50_PP_ENG.book 67 ページ 2005年8月31日 水曜日 午後2時25分 ∫ What is DPOF? DPOF stands for Digital Print Order Format. This enables picture printing information to be written onto an SD card so that it can be used on a system supporting DPOF. ≥ The DPOF setting can be established for up to 999 scenes. ≥ DPOF setting made on another camera may not be recognized by this unit. Please perform the DPOF settings on this unit. ≥ You cannot add the recording date to pictures to be printed with the DPOF settings.
VQT0T50_PP_ENG.book 68 ページ 2005年8月31日 水曜日 午後2時25分 PictBridge (continued) 2 PictBridge SETUP 3 0 Press the cursor button up, down, left or right to select a scene to be printed, then press the button in the center. 3/24 The number of pictures set is displayed. ENTER PictBridge Press the cursor button up or down to select the desired number of prints, then press the button in the center. 3/24 2 SETUP 4 ENTER Press the menu button to display the menus screen.
VQT0T50_PP_ENG.book 69 ページ 7 PictBridge DATE PRINT PAPER SIZE PAGE LAYOUT STANDARD PRINT SETUP 8 DATE PRINT PAPER SIZE PAGE LAYOUT YES PRINT NO ENTER 水曜日 午後2時25分 Use the cursor button to select [ PAGE LAYOUT], then press the cursor button right to enter the layout setting. – STANDARD: Layout specific to the printer – : No frame print – : Frame print ≥ You cannot set page layouts not supported on the printer.
VQT0T50_PP_ENG.book 70 ページ 2005年8月31日 水曜日 午後2時25分 Playback on TV Images recorded by this unit can be played back on a TV. ¬ Insert an SD card with recordings into the unit. 1 Open the terminal cover and then connect the multi cable (supplied) to the multi-connector terminal [MULTI] and the TV. [VIDEO IN] [AUDIO IN] MULTI [S-VIDEO IN] 1 2 1 Multi cable (supplied) Insert the plugs as far as they will go. ≥ If the TV has an S-Video terminal, then also connect an S-Video plug.
VQT0T50_PP_ENG.book 71 ページ 2005年8月31日 水曜日 午後2時25分 Connecting to a TV with a 4:3 TV aspect ratio When motion pictures recorded with a 16:9 aspect ratio (the motion picture recording menu’s [WIDE] setting is [ON]) or still pictures recorded with the same aspect ratio (the still picture recording menu’s [PICTURE SIZE] setting is [HDTV]) are played back on a TV with a 4:3 aspect ratio, the images shown on the LCD monitor may be elongated vertically.
VQT0T50_PP_ENG.book 72 ページ 2005年8月31日 水曜日 午後2時25分 Using this unit’s recorded data on other devices This is for copying recordings from a DVD recorder’s SD card slot onto its hard disk. To prevent accidental deleting of images recorded, or when the SD card is full, record the files on the SD card to the DVD recorder’s hard disk or DVD-RAM. Depending on the type of DVD recorder used, it may not be possible to copy motion pictures (MPEG2) recorded with this unit onto a hard disk, etc.
VQT0T50_PP_ENG.book 73 ページ 2005年8月31日 水曜日 午後2時25分 PC With a PC When the CD-ROM (supplied) is inserted into the PC, the CD launcher starts. Video editing software MotionSD STUDIO 1.0E This software allows pictures to be acquired from this unit, edited and output. You can also send a picture acquired from this unit by e-mail, and edited pictures can be written to the DVD drive. For information about how to use MotionSD STUDIO 1.0E, read the PDF operating instructions.
VQT0T50_PP_ENG.book 74 ページ 2005年8月31日 水曜日 午後2時25分 With a PC (continued) ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some personal computers cannot be used. ≥ This software is not Macintosh compatible. ≥ This software is not compatible with Microsoft Windows 3.1, Windows 95, Windows 98, Windows Me and Windows NT. ≥ Operation is not guaranteed on an upgraded OS. ≥ Operation on an OS other than the one pre-installed is not guaranteed.
VQT0T50_PP_ENG.book 75 ページ 2005年8月31日 水曜日 午後2時25分 Operating environment for MotionSD STUDIO 1.0E (Video Editing Software) Personal computer IBM PC/AT compatible personal computer OS Microsoft Windows 2000 Professional SP4/Microsoft Windows XP Home Edition SP2/Microsoft Windows XP Professional SP2 CPU Intel Pentium III 800 MHz or higher (including compatible CPU) (Intel Pentium 4 1.
VQT0T50_PP_ENG.book 76 ページ 2005年8月31日 水曜日 午後2時25分 With a PC (continued) Operating environment for using the unit as a Web camera Personal computer IBM PC/AT compatible personal computer OS Microsoft Windows 2000 Professional SP4/Microsoft Windows XP Home Edition SP1 or SP2/Microsoft Windows XP Professional SP1 or SP2 (The standard driver of OS is used after Windows XP SP2.
VQT0T50_PP_ENG.book 77 ページ 2005年8月31日 水曜日 午後2時25分 Installing MotionSD STUDIO ≥ Before attempting to start up the CD launcher, close all other software applications which are running. ≥ Do not perform any other operations on your PC while MotionSD STUDIO is being installed. 1 Insert the CD-ROM into the PC. The CD launcher starts. (Refer to page 79 if the CD launcher fails to start automatically after the CD-ROM has been inserted into the PC.) 2 Click [MotionSD STUDIO 1.0E].
VQT0T50_PP_ENG.book 78 ページ 2005年8月31日 水曜日 午後2時25分 Installing the Web Camera Driver ≥ Before attempting to start up the CD launcher, close all other software applications which are running. ≥ Install the driver if you are using Windows XP SP1 or Windows 2000 SP4. (With Windows XP SP2, the driver does not need to be installed because the Web camera is run using the operating system’s standard driver.) ≥ If you are using Windows XP, installation may take some time depending on the environment.
VQT0T50_PP_ENG.book 79 ページ 4 2005年8月31日 水曜日 午後2時25分 Read carefully through the terms and conditions shown on the screen for the [License Agreement], then click [Yes]. ≥ You cannot install the application if you click [No]. ≥ After the application has been installed, the PC will reboot automatically. ≥ Depending on the operating environment, you may be required to install DirectX 9.0b. If so, click [Yes], and install it.
VQT0T50_PP_ENG.book 80 ページ 2005年8月31日 水曜日 午後2時25分 Connection and recognition procedures After the driver and software applications are installed, the unit must be connected to the PC and be correctly recognized by the PC. ≥ Connect after installing the driver and software applications. If you connect this unit to a PC before installation, this unit may not be properly recognized. ≥ If a CD-ROM is inserted in the PC, remove it.
VQT0T50_PP_ENG.book 81 ページ 2005年8月31日 水曜日 午後2時25分 When this unit is in motion picture recording mode or still picture recording mode, verify the driver. (P86) ≥ If you are running Windows 2000, the message shown on the right may appear the first time you connect this unit to the PC (the first time you use motion picture recording mode or motion picture playback mode). This has no affect on operation so click [Yes]. – [Panasonic SD Video Camera Web Camera Device] is displayed.
VQT0T50_PP_ENG.book 82 ページ 2005年8月31日 水曜日 午後2時25分 Using MotionSD STUDIO ≥ Before initial use, select the software’s [Read this first] from the start menu, then read through the additional instructions or updated information. ≥ The End User Licence Agreement is displayed when the software is first started so read carefully through its terms and conditions, then click [I agree]. ∫ Starting MotionSD STUDIO 1 Select [start]> [All Programs (Programs)]> [Panasonic]> [MotionSD STUDIO 1.
VQT0T50_PP_ENG.book 83 ページ 2005年8月31日 水曜日 午後2時25分 Reading the MotionSD STUDIO operating instructions For details on how to use MotionSD STUDIO, read the PDF instructions or the help files. 1 Select [start]> [All Programs (Programs)]> [Panasonic]> [MotionSD STUDIO 1.0E]> [Manual (PDF format)]. ≥ After starting the software, on the menu select [Help]>[Help] to display the help files. ≥ You will need Adobe Acrobat Reader 5.0 or later to read the PDF operating instructions.
VQT0T50_PP_ENG.book 84 ページ 2005年8月31日 水曜日 午後2時25分 Using the unit as a Web Camera (continued) ∫ Software that can be used when using the unit as a Web Camera (±: Available, —: Not available) 2 Windows XP 1 Windows XP Windows 2000 Windows 2000 Windows Messenger MSN Messenger MSN Messenger Windows Messenger ± — — MSN Messenger — ± ± MSN Messenger — ± ± Refer to page 76 for information about the operating environment.
VQT0T50_PP_ENG.book 85 ページ 2005年8月31日 水曜日 午後2時25分 Software application uninstallation Follow the steps below to uninstall any software applications that you no longer require. 1 Click [start]>([Settings]>) [Add or Remove Programs (Applications)] in [Control Panel]. 2 Click here. Select the software application to be deleted, then click [Change/Remove] ([Change or Remove] or [Add/Remove]). ≥ Proceed with the uninstallation by following the on-screen instructions.
VQT0T50_PP_ENG.book 86 ページ 2005年8月31日 水曜日 午後2時25分 Verifying the driver If the driver does not work properly, follow the steps below to verify if it has been recognized properly. Select the unit’s mode, connect the unit to the PC via the USB cable, then verify the driver. (P80) ≥ With some PCs including those made by NEC, the Device Manager may not be displayed if a mode that places restrictions on the functions has been established.
VQT0T50_PP_ENG.book 87 ページ 2005年8月31日 水曜日 午後2時25分 ∫ If the driver has not been recognized properly ] [!] or [Unknown device] appears at [USB (Universal Serial Bus) controller] or [Other devices], etc. (Where the display will appear depends on the type of PC you are using.) Disconnect the USB cable, uninstall then re-install the [Web Camera Driver] (P78) and connect the USB cable again. In the following cases, the Web camera driver has not been installed properly.
VQT0T50_PP_ENG.
VQT0T50_PP_ENG.
VQT0T50_PP_ENG.
VQT0T50_PP_ENG.book 91 ページ 2005年8月31日 水曜日 午後2時25分 Setup menu ∫ [ ∫ [ DISPLAY] ≥OFF ≥ON The screen indications are selected as shown in the illustration below. OFF ; 3:42 PM DEC 15 2005 ON SP R 0h00m 0h00m00s ; 3:42 PM DEC 15 2005 ∫ [ BEEP SOUND] ≥OFF ≥ON This allows operations such as starting and ending recording to be signalled by a beep. When [OFF] is set, no beep is heard when an operation such as recording is started or ended. 1 Beep When you start recording or turn on the power.
VQT0T50_PP_ENG.book 92 ページ 2005年8月31日 水曜日 午後2時25分 Indications Recording indications 1 Motion picture recording 1 SP R 0h00m 2 Still picture recording 0h00m00s ; 2 O.I.S. AUTO ; O.I.S.
VQT0T50_PP_ENG.book 93 ページ 2005年8月31日 水曜日 午後2時25分 Playback indications 1 Motion picture playback 1 1/24 2 Still picture playback 2 1/24 2 R SETUP 1 Playback ; Pause 5/6 Cue/Review playback 7/8 QXGA UXGA SXGA Last/first file paused 9/: Skip playback D/E Slow motion playback / SETUP PLAY Frame-by-frame playback XGA SVGA 0h00m00s Motion picture playback time Select playback Volume adjustment Slide show playback 100-0001 Still picture folder/Scene number display No.
VQT0T50_PP_ENG.book 94 ページ 2005年8月31日 水曜日 午後2時25分 Indications (continued) Confirmatory indications CANNOT RECORD. Data writing to the SD card has failed. CHECK CARD. This card is not compatible or it cannot be recognized by the unit. THIS CARD CANNOT RECORD IN VIDEO MODE. An 8 MB or 16 MB SD card has been inserted in motion picture recording mode. CARD LOCKED. The write protection switch on the SD Memory Card is set to [LOCK]. (P15) SCENE NUMBER IS FULL. 94 VQT0T50 PROGRAM NUMBER IS FULL.
VQT0T50_PP_ENG.book 95 ページ 2005年8月31日 水曜日 午後2時25分 CHANGE TO MANUAL MODE. You have set the [AUTO/MANUAL/FOCUS] switch to [AUTO] and are attempting to set [SCENE MODE] from the menu screen. CANCEL MAGICPIX MODE. You are attempting to set [SCENE MODE] from the menu screen while MAGICPIX is set. (P42) TURN OFF POWER LCD. You are attempting to set [LCD AI] from the menu screen when the [POWER LCD] button has been pressed to brighten the LCD monitor. NO INK IN PRINTER. NO PAPER IN PRINTER.
VQT0T50_PP_ENG.book 96 ページ 2005年8月31日 水曜日 午後2時25分 Indications (continued) ∫ About recovery When the SD card was accessed, you tried to playback a file displayed as a thumbnail in shades of blue and white (P101) or faulty control information or a play list created on another device was read, a control information recovery message or play list delete message such as those shown below may be displayed. (After recovery starts, it may take time depending on the error.) REPAIRING CONTROL DATA.
VQT0T50_PP_ENG.book 97 ページ 2005年8月31日 水曜日 午後2時25分 Functions that cannot be used simultaneously Some functions in this unit are disabled or cannot be selected due to the unit’s specifications. The table below shows examples of functions restricted by various conditions.
VQT0T50_PP_ENG.book 98 ページ 2005年8月31日 水曜日 午後2時25分 Troubleshooting Problem This unit cannot be turned on. ≥ Is the battery fully charged? > Charge the battery using the AC adaptor. (P17) This unit is turned off automatically. ≥ If you do not use the unit for approximately 5 minutes, the power is automatically turned off to conserve the battery charge. (P91) To resume recording, turn the power back on. The power will not turn off automatically when the power save function (P91) is set to [OFF].
VQT0T50_PP_ENG.book 99 ページ 2005年8月31日 水曜日 午後2時25分 Problem Check points Recording does not start although power is supplied to this unit and the SD card is correctly inserted. ≥ Has the SD card’s write protect switch been set to [LOCK]? > No recording is possible while the write protect switch is set to [LOCK]. (P15) ≥ Is the SD card’s memory full? > If the card has no more available memory, free up some memory by copying some scenes to a PC (P80) and then deleting unnecessary scenes.
VQT0T50_PP_ENG.book 100 ページ 2005年8月31日 水曜日 午後2時25分 Troubleshooting (continued) Problem Check points Although this unit is ≥ Have you selected video input on the TV? correctly connected to a > Please read the operating instructions of your TV and TV, playback images select the channel that matches the input used for the connection. cannot be seen. Playback image is not clear. Sound breaks up or noise affects the picture and/or sound.
VQT0T50_PP_ENG.book 101 ページ Problem 2005年8月31日 水曜日 午後2時25分 Check points The scenes are not correctly displayed in thumbnails. ≥ Scenes displayed as 1/3 thumbnails in shades of blue and white cannot be played back or deleted. If the scenes are unnecessary, format the SETUP PLAY SD card to erase the data. ≥ Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased. Store important data on a PC, etc.
VQT0T50_PP_ENG.book 102 ページ 2005年8月31日 水曜日 午後2時25分 Others About condensation When condensation forms on the unit, the lens will cloud up and the unit may not work properly. Make every effort to ensure that condensation does not form. If it does form, take the actions described below. Causes of condensation Condensation takes place when the ambient temperature or humidity is changed as follows. ≥ When this unit is brought inside from the cold (e.g. a ski slope) to a warm room.
VQT0T50_PP_ENG.book 103 ページ 2005年8月31日 水曜日 午後2時25分 Explanation of terms Automatic white balance White balance adjustment recognizes the colour of light and adjusts so the white colour will become a purer white. The unit determines the hue of light that comes through the lens and white balance sensor, thereby judging the recording condition, and selects the closest hue setting. This is called automatic white balance adjustment.
VQT0T50_PP_ENG.book 104 ページ 2005年8月31日 水曜日 午後2時25分 Explanation of terms (continued) Auto focus The lens is moved forward or backward automatically to bring the subject into focus. Auto focus has the following characteristics. ≥ Adjusts so that the vertical lines of a subject are seen more clearly. ≥ Attempts to bring an object with higher contrast into focus. ≥ Focuses on the screen center only. Due to these characteristics, auto focus does not work correctly in the following situations.
VQT0T50_PP_ENG.book 105 ページ 2005年8月31日 水曜日 午後2時25分 s Cautions for Use About this unit Read the operating instructions before use. ≥ The unit and SD Memory Card become warm after long operation, but this is not a malfunction. Keep the unit away from magnetized equipment/mobile phones, microwave ovens, TVs and video game equipment. ≥ If you use the unit on or near a TV, the images or sound may be disturbed due to electromagnetic wave radiation.
VQT0T50_PP_ENG.book 106 ページ 2005年8月31日 水曜日 午後2時25分 s Cautions for Use (continued) About the battery The battery used in this unit is a rechargeable lithium-ion battery. It is susceptible to humidity and temperature and the effect increases the more the temperature rises or falls. In cold areas, the full charge indication may not appear or the low battery indication may appear about 5 minutes after starting use.
VQT0T50_PP_ENG.book 107 ページ 2005年8月31日 When the status indicator flashes at intervals of about 0.5 second (on for about 0.25 sec. and off for about 0.25 sec.): ≥ The battery has not been recharged. Remove the battery from the unit, and try charging it again. ≥ The battery temperature or ambient temperature may be extremely high or low. Wait until the appropriate temperature is restored before charging the battery again.
VQT0T50_PP_ENG.book 108 ページ 2005年8月31日 水曜日 午後2時25分 Specifications SD Video Camera: Information for your safety Power source: DC 9.3 V (AC adaptor)/7.4 V (Battery) Power consumption: When recording: 3.9 W (AC adaptor)/3.5 W (Battery) 108 VQT0T50 Signal system EIA Standard: 525 lines, 60 fields NTSC color signal Image sensor 1/6-inch 3CCD image sensor Total pixels approx. 800 Kk3 Effective pixels Motion picture: approx. 640 Kk3 (4:3)/ approx. 540 Kk3 (16:9) Still picture: approx.
VQT0T50_PP_ENG.book 109 ページ 2005年8月31日 水曜日 午後2時25分 USB Card reader/writer function (No copyright protection support) USB 2.0 compliant (Hi-Speed) PictBridge-compliant Web Camera function Flash GN 4.5 Available flash range: approx. 1 m to 2 m (3.3 feet to 6.6 feet) Dimensions Approx. 49.9 mm (W) k 96.7 mm (H) k 80.4 mm (D) Approx. 1 31/32 inch (W) k 3 13/16 inch (H) k 3 3/16 inch (D) (excluding the projecting parts) Mass Approx. 242 g (8.54 oz) Mass in operation Approx. 282 g (9.
VQT0T50_PP_ENG.book 110 ページ 2005年8月31日 水曜日 午後2時25分 Limited Warranty (For USA Only) Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.
VQT0T50_PP_ENG.book 111 ページ 2005年8月31日 水曜日 午後2時25分 service by anyone other than a Factory Servicenter or other Authorized Servicer, or damage that is attributable to acts of God. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.
VQT0T50_PP_ENG.book 112 ページ 2005年8月31日 水曜日 午後2時25分 Customer Services Directory (For USA Only) For Product Information, Operating Assistance, Literature Request, Dealer Locations, and all Customer Service inquiries please contact: 1-800-272-7033, Monday-Friday 8:30am-8pm EST. Web Site: http://www.panasonic.com/consumersupport You can purchase parts, accessories or locate your nearest servicenter by visiting our Web Site.
VQT0T50_PP_ENG.book 113 ページ 2005年8月31日 水曜日 午後2時25分 Please photocopy this form when making a request for service notice, in the unlikely event this product needs service. Request for Service Notice: •Please include your proof of purchase. (Failure to do so will delay your repair.) •To further speed your repair, please provide an explanation of what is wrong with the unit and any symptom it is exhibiting.
VQT0T50_PP_ENG.book 114 ページ 2005年8月31日 水曜日 午後2時25分 Warranty (For Canadian Customers) FOR CANADA Panasonic Canada Inc. PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase.
VQT0T50_PP_ENG.book 115 ページ 2005年8月31日 水曜日 午後2時25分 Index A AC adaptor ......................................... 17, 106 Adobe Acrobat Reader ............................... 73 Aperture/Gain ............................................. 48 Auto focus ................................................ 104 Auto mode .................................................. 32 Automatic white balance ........................... 103 B Backlight Compensation ............................. 39 Battery ..................
VQT0T50_PP_ENG.book 116 ページ 2005年8月31日 水曜日 午後2時25分 Spanish Quick Use Guide/Guía rápida para el usuario en español ∫ Cómo insertar/quitar una tarjeta SD Antes de insertar/quitar una tarjeta SD, asegúrese haber apagado la unidad [OFF]. Si se inserta o se quita la tarjeta SD con la unidad encendida, esta unidad podría no funcionar bien o los datos grabados en la tarjeta SD podrían perderse.
VQT0T50_PP_ENG.book 117 ページ 2005年8月31日 水曜日 午後2時25分 Cómo quitar la batería Quite la tapa de la batería, luego extraiga la batería. ≥ Después de quitar la batería, vuelva a poner la tapa de la batería en su lugar. ∫ Recarga de la batería ¬ Ponga el interruptor de encendido en [OFF]. 1 Conecte el adaptador CA A (suministrado) a B esta unidad y a la toma CA. A 1 2 DC IN 9.3V 3 1 Abra la tapa del terminal de esta unidad. 2 Conecte el adaptador CA al terminal de entrada DC de esta unidad [DC IN 9.3V].
VQT0T50_PP_ENG.book 118 ページ 2005年8月31日 水曜日 午後2時25分 Spanish Quick Use Guide/Guía rápida para el usuario en español (continuación) ∫ Grabación de imágenes dinámicas 1 Gire el selector de modo para seleccionar . PC Ahora la tapa del objetivo se abre automáticamente. 2 Pulse el botón de grabación para empezar la grabación. Fin de la grabación Pulse de nuevo el botón de grabación. ≥ [¥] y [;] son de color rojo durante la grabación. No mueva esta unidad hasta que [;] sea de color verde.
VQT0T50_PP_ENG.book 119 ページ 3 2005年8月31日 水曜日 午後2時25分 Pulse completamente el botón de grabación (hasta el máximo) para grabar. ∫ Reproducción de imágenes dinámicas 1 Gire el selector de modo para seleccionar . La tapa del objetivo se cierra automáticamente. PC 2 Pulse los botones de las flechas hacia arriba, hacia abajo, hacia la izquierda o hacia la derecha para llevar a cabo las distintas operaciones. Reproducción/Pausa: Pulse . Reproducción de revisión: Siga pulsando :.
VQT0T50_PP_ENG.book 120 ページ 2005年8月31日 水曜日 午後2時25分 Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Panasonic Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 C 2005 Matsushita Electric Industrial Co., Ltd.