Instruction Manual (PP)

30
VQT0T50
Changing the picture quality on the LCD monitor (LCD AI)
Press the menu button, then use the
cursor button to select
[ SETUP]#[ LCD AI]#
[DYNAMIC] or [NORMAL]. (P26)
– [DYNAMIC]:
The image on the LCD monitor becomes
clear and vivid.
– [NORMAL]:
Switches to the standard picture quality.
In order to increase the brightness of the entire LCD monitor
Press the [POWER LCD] button.
[ ] appears on the LCD monitor.
≥ If the [POWER LCD] button is pressed, the
entire LCD monitor will become approx. twice
as bright as the normal.
≥ LCD stands for Liquid Crystal Display, and in
this context refers to the LCD monitor.
Adjusting LCD monitor (continued)
MENU
SETUP ENTER
EXIT
POWER SAVE
LCD SET
BEEP SOUND
INITIAL SET
SETUP
NORMAL
DYNAMIC
2/3
LCD AI
≥ When [DYNAMIC] is set, the LCD
monitor is set to the
color level and
brightness optimally suited for the
particular scenes to be recorded. Crisp
and bright images will be displayed.
≥ The effect will vary depending on the
scene recorded.
≥ This function is automatically set to
[DYNAMIC] when the brightness of the
LCD monitor is increased (when [ ] is
displayed) and cannot be set to
[NORMAL] independently.
≥ This will not affect the images to be
recorded.
POWER LCD
≥ When the button is pressed again, [ ] goes off, and the original brightness is restored
to the LCD monitor.
≥ This will not affect the images to be recorded.
≥ When the AC adaptor is used, [ ] appears automatically and the monitor becomes
brighter when the power is turned on.
VQT0T50_PP_ENG.book 30 ページ ２００５年８月３１日 水曜日 午後２時２５分