Instruction Manual (PP)

51
VQT0T50
3 Press the record button all the way
down (as far as it will go) to record.
To record still pictures clearly
≥ When zooming in on the subject with a magnification of 4k to 10k, it is difficult to
reduce the slight shaking from holding this unit by hand. We recommend decreasing
the zoom magnification and approaching the subject when recording.
≥ You can record stable pictures without shaking by using a tripod and the remote
control.
∫ Screen indications in still picture recording mode
1 Quality of still pictures
2 Size of still pictures
3 Remaining number of still pictures
(Flashes red when [R 0] appears.)
≥ The sound cannot be recorded.
≥ When the access lamp is lit, do not
operate the mode dial.
≥ When the access lamp is lit, do not insert
or remove an SD card.
≥ If the write protection switch on the SD
card is set to [LOCK], it cannot be
used for recording. (P15)
≥ Another product may degrade or not play
back still pictures recorded on this unit.
≥ If set [PICT. QUALITY] to [ ],
mosaic-pattern noise may appear on a
playback image depending on the picture
content.
≥ When the [PICTURE SIZE] is set to other
than [640], the mega pixel recording
mode is set.
R 3
R 3
R 3
1
2
3
VQT0T50_PP_ENG.book 51 ページ ２００５年８月３１日 水曜日 午後２時２５分