Manual

Operation
Note: Turn the amplifier on, and set it for listening to the sound.
(Refer to the operating instructions of the amplifier.)
Reduce the volume level of the amplifier.
Set the amplifier's tone controls to the center position, and set _
the super bass or loudness switch to "OFF".
Set the power switch to "on".
Set the tape-monitor selector of the amplifier to
"Tape" position. (Refer to note)
(Refer to the operating instructions of the amplifier for further details.)
Reverse mode selector
This unit
(SH-8038)
To listen to corrected sound of compact disc or radio.
To record the corrected sound of compact disc or from the radio.
To record the uncorrected sound of compact disc or from the radio.
To listen to corrected sound from a tape deck.
4 5 6
equalizer rec mode ;i ........ ctor
m
"on"(l--_)
Setto any position.
"EQ"(I--_)
_ "straight" (__ II)
_ to any position.
,i OU "
s rce (h_l)
tAne" (i __:L)
_ _r
Press the equalization switch (equalizer) to the "off" (__ II) position to listen to uncorrected sound, or when recording.
7
8
Using the left and/or right channel band-
level controls, adjust the tone quality as
desired.
Adjust the volume level of the amplifier.
Set the reverse mode selector to the "on" position (ll_j,.).
(By doing so, the equalization characteristic will be reversed,
thus changing the sound range of sounds emitted from the
speakers.)
Notes
elf the amplifier has a recording mode selector and an input selector: (Make setting as shown in the figure.)
(rec selector) _O
phono or tuner
D
(input selector) /
tape
elf your amplifier has terminals (GRAPHIC EQ./EXTERNAL) for connection of other equipment, use of the recording selector is
unnecessary.
-6-