Owner’s Manual Network Audio Connector Model No. SH-ALL1C Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Register online at www.panasonic.com/register (U.S.
Table of contents Accessories ........................................................................................ 3 Unit care ............................................................................................. 4 Control reference guide...................................................................... 5 Indicator illumination .......................................................................... 6 Connections .............................................................................
Accessories 1 AC power supply cord (AC mains lead) (K2CB2CB00022) For the United Kingdom and Ireland (K2CT2YY00097) For Continental Europe (K2CQ2YY00119) For Australia and New Zealand (K2CJ2YY00101) 1 Audio cable (K2KYYYY00242) 2 Stands (RYQ1443-K1) ≥ Do not use AC power supply cord (AC mains lead) with other equipment. ≥ Product numbers provided in this owner’s manual are correct as of May 2014. These may be subject to change.
Unit care Clean this unit with a soft, dry cloth. ≥ Never use alcohol, paint thinner or benzine to clean this unit. ≥ Before using chemically treated cloth, carefully read the cloth’s instructions. ∫ To dispose or transfer this unit The unit may keep the user settings information in the unit. If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to the factory defaults to delete the user settings.
Control reference guide : Touch area 1 2 MODE –WPS 4 3 5 6 1 Mode switch [MODE] Set the downsampling setting (l 24)/ Turn the beep sound on/off (l 25) 2 WPS pairing switch [-WPS] Enter WPS pairing mode (l 16) / firmware update mode (l 23) 3 Standby/on switch [Í/I] Touch to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
Indicator illumination The indicator patterns illustrated below are displayed during normal operational conditions. Indicator Description Operation indicator (amber) Blinks once ≥ The unit detects the switch touched. Blinks twice ≥ The unit detects a valid operation performed by touching and holding the switch. MODE –WPS Mode indicator (amber) MODE –WPS Blinks once ≥ The following setting is turned on.
Indicator Description Network indicator (blue/red) MODE –WPS MODE –WPS Network indicator (blue) MODE –WPS Network indicator (blue) MODE – Wait for maximum of approximately 60 seconds before the blinking stops. – Do not disconnect the AC power supply cord (AC mains lead). Doing so may cause malfunction or damage. Blinks slowly ≥ The unit is ready for network setup. (l 12) Blinks ≥ The unit is waiting for the WPS connection. (l 16) Blinks fast ≥ The unit is waiting for the WPS PIN code connection.
Connections You can enjoy music from a device on the network by using this unit. At first, you must connect an audio system, amplifier or receiver, etc. to this unit. Ex. Connecting to an audio system STEP1: Installation This unit can be installed either vertically or horizontally. ∫ Horizontal Install the unit with the rubber feet side down as shown below.
∫ Vertical Place the stands and fit the unit into them. Install the unit with the AllPlay icon side up. Rubber feet Stands (supplied) Stands (supplied) When placing the stands, align them with the rubber feet.
STEP2: Connecting to an audio system, etc. Connect an audio system, amplifier or receiver, etc. to this unit using an audio cable (supplied) or an optical cable (not supplied). ∫ Using an audio cable (supplied) Audio cable (supplied) R L AUDIO IN R RAUDIO OUTL L AUDIO OUT ∫ Using an optical cable (not supplied) Optical cable (not supplied) ≥ For details, refer to the operating instructions of the connected device.
STEP3: Connecting to an AC outlet AC power supply cord (AC mains lead) (supplied) To an AC outlet ≥ It takes some time until the unit connects to a network and becomes ready for use after it is connected to an AC outlet and turned on. Once connected to a network, the unit can be used at all times unless the AC outlet is turned off. We recommend connecting the unit to an AC outlet that is always live.
Network settings You can stream music from a device on the network by using the Qualcomm® AllPlayTM smart media platform or DLNA feature. To use these features, this unit must join the same network as the device. Choose a network setting method from the following. “Using an Internet browser” (l 13) ≥ You can access this unit’s network settings from the Internet browser on your smartphone or PC, etc.
Using an Internet browser ≥ The following steps are based on a smartphone. ≥ Do not connect a LAN cable. Doing so will disable the Wi-Fi® function. 1 Turn this unit on. 2 Go to Wi-Fi® settings on the device. ≥ Proceed to the next step after the network indicator changes from blinking in blue and red to blinking in blue. – The blinking in blue starts after maximum of approximately 60 seconds. If the blinking in blue does not start, restore the factory defaults.
4 Start the Internet browser on the device to display the settings page. ≥ [iOS] : The settings page will be automatically displayed. ≥ [Except_iOS] : Once you open the Internet browser, the settings page will be displayed – If the settings page is not displayed, type “http://172.19.42.1/” into the URL address field. 5 Type a device name and then select “Next”. ≥ The device name will be displayed as this unit’s name on the network. ≥ The guaranteed limit is 32 characters.
6 Select your network name (SSID) and type the password. ≥ Check the wireless router for the network name (SSID) and the password. ≥ A list of network names (SSIDs) will be appeared when you select the “Network Name” box. ≥ To show the characters typed in the “Password” box, select “Show Password”. ≥ If your network requires specific settings, select “DHCP” to disable DHCP. – You can use specific IP address, subnet mask, default gateway, primary DNS, etc.
Using WPS (Wi-Fi Protected SetupTM) ≥ Do not connect a LAN cable. Doing so will disable the Wi-Fi function. e.g., A compatible wireless router may have the WPS identifier mark. 1 Turn this unit on. ≥ Proceed to the next step after the network indicator changes from blinking in blue and red to blinking in blue. – The blinking in blue starts after maximum of approximately 60 seconds. If the blinking in blue does not start, restore the factory defaults. (l 27) 2 Touch and hold [-WPS] on the unit.
Using a LAN cable 1 Disconnect the AC power supply cord (AC mains lead). 2 Connect this unit to a broadband router, etc. using a LAN cable. e.g., Broadband router, etc. LAN cable (not supplied) 3 Connect the AC power supply cord (AC mains lead) to this unit, and turn the unit on. ≥ When the connection is established, the network indicator (blue) lights up. ≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
To make network-related settings You can change this unit’s name on the network, and use specific IP address, subnet mask, default gateway, primary DNS, etc. Preparation ≥ Complete the network settings. 1 Check this unit’s IP address (l 26), and note it down. 2 Connect your device to the same network as this unit. 3 Start an Internet browser on your device and then type this unit’s IP address into the address field to display the settings page.
Enjoying music You can enjoy music on your home network and online music services. Home network To stream music from the device on the network to this unit as AllPlay/ DLNA speakers, you need to download the app “Panasonic Music Streaming” (free of charge), etc. ≥ [iOS] : App Store ≥ [Android] : Google PlayTM Preparation ≥ Connect the following devices to the same network as this unit. – Device with “Panasonic Music Streaming”, etc.
5 [iOS] : From “ ”, select this unit as the output speakers. e.g., My room [Android] : From “Select Speaker”, select this unit as the output speakers. ≥ If you have multiple AllPlay speakers, you can enjoy synchronized sound from them. Select “ ” and then select the speakers to group. – You can also play different songs on other AllPlay speakers at the same time. – The number of AllPlay speakers that can perform playback at the same time differs depending on the situation of use.
Online music services This unit is compatible with several music services. Visit the following website for the compatibility information. www.panasonic.com/global/consumer/homeav/allseries/service Preparation ≥ Make sure that the network is connected to the Internet. ≥ Connect a device with a compatible app installed to the same network as this unit. 1 Turn this unit on. ≥ The network indicator (blue) lights up. – If the network indicator is blinking in blue and red, wait until the blinking stops.
∫ Using online music services other than Spotify After step 2 3 From “ ”, select this unit as the output speakers. ≥ Depending on the service, you might need to open full screen player to display “ ”. ≥ If you have multiple AllPlay speakers, you can enjoy synchronized sound from them. Select “Group” and then select the speakers to group. ≥ This unit will turn on automatically from standby mode when you select the unit as the output speakers.
Firmware updates Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge. Preparation ≥ Connect this unit to the network. (l 12) – Make sure that the network is connected to the Internet. 1 Touch and hold [-WPS]. When the operation indicator (amber) starts blinking and while you are still touching and holding [-WPS], touch [MODE]. ≥ The mode indicator (amber) starts blinking.
Others Downsampling Set whether the high quality audio output from the optical terminal will be output as is (“off”) or not (“on”). ≥ When this unit is connected to a device that does not support a sampling frequency of 88.2 kHz or higher, change the setting to “on”. This unit will downsample the frequency as follows before outputting audio. (Audio will not be heard when “off” (default) is set.) – 88.2 kHz / 176.4 kHz # 44.1 kHz – 96 kHz / 192 kHz # 48 kHz Touch and hold [MODE].
Operation sound setting You can turn the beep sound on/off. Touch [MODE]. ≥ The mode indicator (amber) blinks. – Blinks once: on (default) – Blinks twice: off ≥ If the network indicator is blinking in blue and red, wait until the blinking stops. Wi-Fi signal strength To check the Wi-Fi signal strength where the unit is located. If you are playing music on the network, stop the playback. Touch and hold both [-WPS] and [MODE].
IP/MAC address To check the unit’s IP address and the MAC address. Preparation ≥ Download the app “Panasonic Music Streaming”. (l 19) 1 Start the app “Panasonic Music Streaming”. 2 [iOS] : Select “ ”. [Android] : Select “Select Speaker”. 3 Select “ ”. 4 Touch and hold “Group” e.g., e.g., in the title bar at the top. MAC address IP address ≥ This unit will be displayed as “Panasonic ALL1C” if the device name is not set.
Troubleshooting Before requesting service, make the following checks. If the problem remains unresolved, consult your dealer for instructions. Refer to the limited warranty on the “Owner’s Manual ”. Do you have the latest firmware installed? ≥ Panasonic is constantly improving the unit’s firmware to ensure that our customers are enjoying the latest technology. (l 23) General To return all settings to the factory defaults 1 Turn this unit on.
The network indicator does not stop blinking in blue and red. ≥ The unit needs to be repaired. Consult your dealer. This unit has stopped producing operation sounds. ≥ Set the operation sound setting to on. (l 25) Firmware updates The mode indicator (amber) keeps blinking twice. ≥ This unit is not connected to the network. Touch any switch, and then check the network connection. (l 12) The mode indicator (amber) keeps blinking three times. ≥ The update has been failed. Touch any switch, and then try again.
The device name is not changed. ≥ Turn the unit off, and then disconnect and reconnect the AC power supply cord (AC mains lead). Cannot select this unit as the output speakers. ≥ Make sure that the devices are connected to the same network as this unit. ≥ Reconnect the devices to the network. ≥ Turn off and then on the wireless router. Playback does not start. The sound is interrupted. ≥ If using the 2.4 GHz band on the wireless router, simultaneous use with other 2.
Specifications ∫ GENERAL Power supply AC 120 V, 60 Hz For the United Kingdom and Ireland For Continental Europe AC 220 V to 240 V, 50 Hz For Australia and New Zealand Power consumption 3W Power consumption in standby mode Approx. 2.5 W Dimensions (WkHkD) Horizontal installation 135 mmk51 mmk142 mm (5 11/32q k 2 1/32q k 5 19/32q) Vertical installation with stand Mass (Weight) With stand Operating temperature range Operating humidity range 71 mmk142 mmk142 mm (2 13/16q k 5 19/32q k 5 19/32q) Approx.
∫ AUDIO SECTION ANALOG AUDIO OUTPUT Output Level (1 kHz, 0 dB) Frequency Response (fs 192 kHz) Signal to Noise Ratio (IHF-A) (1 kHz, 0 dB, fs 192 kHz) Total Harmonic Distortion Plus Noise (1 kHz, 0 dB, fs 192 kHz) DIGTAL AUDIO OUTPUT Stereo Pin jack 2 Vrms 4 Hz to 80 kHz, -3dB 102 dB or more 0.005 % or less Optical ∫ Audio support format (AllPlay) MP3/AAC Sampling frequency Audio word size Channel count Bit-rate FLAC/ALAC/WAV Sampling frequency Audio word size Channel count 32/44.
≥ Specifications are subject to change without notice. ≥ Mass and dimensions are approximate. ≥ Uncompressed FLAC files may not operate correctly. Qualcomm® AllPlayTM smart media platform is a product of Qualcomm Connected Experiences, Inc. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States, and other countries and used with permission. AllPlay and the AllPlay icon are trademarks of Qualcomm Connected Experiences, Inc., and used with permission.
For the United Kingdom and Ireland customers Sales and Support Information Customer Communications Centre ≥ For customers within the UK: 0844 844 3899 ≥ For customers within Ireland: 01 289 8333 ≥ Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays). ≥ For further support on your product, please visit our website: www.panasonic.co.
Manufactured by: Panasonic Corporation Kadoma, Osaka, Japan Importer for Europe: Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Panasonic Corporation http://www.panasonic.com Web Site: http://panasonic.net Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 www.panasonic.