User Guide

+
+
-
-
OPEN
A
A
A
B
B
Location of controls/Connection to other equipment
Rechargeable battery
compartment
Hold switch
Headphone
jack
Open
switch
Play/Pause/
Top menu,
top playlist
recall
Stop/Turn off
∫ To optical digital/line out jack (OPT OUT/OUT)
∫ To magnetic adaptor terminal
∫ To battery case terminal (EXT BATT)
Display panel
A Volume control/
Menu, playlist
selection
Play/Stop/
Turn off/
Top menu,
top playlist recall
B Skip/Search/Level selection
Tone selection
Play mode selection
Memory/Recall/Display/AB repeat/
Anti-skip on-off/Digital Re-master
Earphones
Digital connection
Analogue connection
To Optical jack
To CD or AUX terminals
Audio system
Adjust the volume
level on the audio
system.
AC adaptor
To household
mains socket
External battery case
Car power adaptor (SH-CDC9) (not included)
You can recharge the batteries with this
connection.
Some cannot be
connected.
Car audio
Optical cable (not included)
Audio cable (not included)
Hold switch
Car stereo cassette adaptor (SH-CDM10A)
(not included)
∫ To remote control jack
Lens
The AC adaptor differs according
to the area.
Main unit
Remote control
4
∫ To DC IN jack
Magnetic adaptor
Power Supply
Rechargeable batteries Recharge before initial use.
Turn the unit off before recharging.
1 2 3
≥You can also connect the AC adaptor directly to the DC IN jack.
≥The AC adaptor differs according to the area.
≥You can recharge the batteries before they are fully discharged.
≥Press the - end and lift out to remove.
≥Fit the battery lid so it is secure and flush with the battery compartment.
If it comes loose, it may scratch your discs.
≥Keep the magnetic adaptor away from items easily influenced by
magnetism (e.g., bank cards, commuter passes, and clocks).
Dry cell batteries (not included)
12 3
Press
You can get longer play by using the rechargeable and dry cell batteries
together.
The battery indicator
Magnetic
adaptor
∫ While the unit is off
Release HOLD on the main unit (➪ page 5) and press
[VOL,+,BATT CHECK].
The number of buttons on the main unit that light indicates the charge.
The unit switches off shortly after the
indicator starts flashing.
The unit is in the standby condition when the AC adaptor is
connected. The primary circuit is always “live” as long as the AC
adaptor is connected to an electrical outlet.
∫ While the unit is on
AC adaptor
LR6, AA, UM-3
EXT BATT jack of
the main unit
To
household
mains
socket
If the power plug will not fit your
socket, use the power plug adaptor.
Plug type:
3.5 mm stereo
Plug type:
3.5 mm
stereo
≥Use the AC adaptor (batteries run down easily).
≥
There is no WMA/MP3 output.
≥ Anti-skip function does not work, do not subject the unit to vibration.
Play time (➪ Specifications, page 2)
≥Turn off this unit and the other equipment before connection.
≥If you don't want the remote control sound turn it off. (
➪
page 5)
HighMAT
switch
≥Set the unit’s volume to 10–15.
Close
securely.
Recharging starts.
Flashing stops.
(Approximately 5 to 6 hours)
Buttons flash sequentially.
Recharging complete.
Except for Europe, Australia,
N.Z., China and Hong Kong area
≥ Before playing starts the battery indicator may flash although the
batteries are not drained. It appears correctly once you start play.