Operating Instructions
Table Of Contents
Putting the player together
12
Connecting to the PHONO terminals and AC IN terminal
Make connection to the PHONO terminals and AC IN terminal before setting up or installing
the player.
1
Take out the player from the package, and rest the player in the assembled
cardboard box so that you can make connection to the PHONO terminals
and AC IN terminal on the back side.
2
Connect the supplied PHONO cable, PHONO earth lead, and AC mains lead.
Be careful not to tip over the player.
Attention
To avoid damaging the player,
cover the player contact area
with a soft cloth or a protection
sheet wrapping the player.
②
Fold the pad along the creases on the back side.
③
Put the pad into
cardboard box.
⑤
Rest the player in the box.
Connecting the PHONO earth lead to
the player and amplifier.
(Black)
(White)
(Red)
Insert the AC mains lead
up to a point just before
the round hole.
④
Fold the front flap inside.
Proceed to
2
.
Pad
Turn the terminal to the left
to loosen.
Insert the earth lug and
tighten the terminal
securely.
Point the vertex of
▷
at the
short side of the cardboard box.
①
Take out the pad in the
bottom
.
SL-1200GR2EBTQBM0908.indd13SL-1200GR2EBTQBM0908.indd13 2023/06/3013:10:382023/06/3013:10:38