Operating Instructions - Language - English
4
Listening to CDs
The letters such as A in the various illustrations refer to the descriptions in the “Location of Controls” section.
Other Play Methods
Location of Controls
BAC EDFG
H
I
J
LM K
HOLD
DC IN 4.5V
K
A Skip/search buttons (
:
,
9
)
B Memory/recall button (MEMORY/RECALL)
C Mode button (MODE)
D Headphone volume control buttons (j, VOL, i)
E EQ button (EQ)
F Stop/operation off button (∫)
G Play/pause button (
1
/
;
)
H Display
I Lock release (4OPEN)
J Battery lid
K Headphone jack (Ë)
L Hold switch (HOLD)
M
DC IN jack (K DC IN 4.5 V)
Skip play
The disc plays from the selected track through to the
last track, then play stops automatically.
Preparation: Put unit in stop mode.
1 Select the desired track.
2
Changing the sound quality
Press during play or stop mode.
The setting switches in the sequence indicated below
each time [EQ] is pressed.
S-XBS>TRAIN>Cancel (no indicator is shown)
^------------------------------------------------}
S-XBS:
Select this setting to boost the low frequency response.
TRAIN:
Select this setting to avoid annoying other passengers
with noise from your headphones while riding on the
train, or to reduce fatigue when listening for a long peri-
od of time.
Note!
The setting returns to S-XBS when you disconnect the
power source.
Repeat play/Random play
Press during play or stop mode.
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1 `)(----------------]
One track is repeated. |
v|
All-track repeat (`) |
All the tracks on the disc are repeated. |
v |
Random (RANDOM) |
The tracks play once each in random |
order and then play stops. |
v |
Random repeat (RANDOM
`
) |
The tracks play repeatedly in random |
order. |
v |
Cancel (no indicator is shown)
--------------}
When pressed during program play
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1
`
M)(------------]
One track is repeated. |
v|
Memory repeat (
`
M) |
The programmed tracks are repeated. |
v
|
Cancel (
M) -------------------------------------------}
Note!
≥You can select the first track to play in random play
and random repeat play by pressing [9] while the
disc is stopped. All the tracks are played.
≥You cannot select random play or random repeat play
during program play.
≥The resume function does not work when random or
random repeat are on.
≥The mode is canceled when you disconnect the power
source.
A
G
C
MODE
Program play
Up to 24 tracks can be entered in the program.
Preparation: Put unit in stop mode.
1 Select the desired track.
2 Register in sequence.
(The indication “M” and the programmed se-
quence appear on the display.)
3 Repeat steps 1 and 2 to program all
desired tracks.
4
∫ To program the same track in the se-
quence more than once
∫ After step 2, press [MEMORY/RECALL] the desired
number of times.
∫ If “'” is displayed
∫ No more tracks can be programmed.
∫ To confirm the contents of the program
∫ Press [MEMORY/RECALL] while the disc is playing.
(The numbers of the programmed tracks appear on
the display in sequence.)
∫ To delete the entire programmed se-
quence
∫ Press [∫].
Note!
The repeat and random play modes are canceled after
steps 1 and 2.
E
EQ
B
MEMORY/
RECALL
A
G
Side panel
of the unit