7708en.book 2 ページ ２００４年２月１４日 土曜日 午後３時２４分 System SC-HT822V Main unit SA-HT822V Front and surround speakers SB-FS822 Center speaker SB-PC820 Active subwoofer SB-WA822 Operations in these instructions are described mainly with the remote control, but you can do the operations on the main unit if the controls are the same. CAUTION! CAUTION: DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED.
7708en.book 3 ページ ２００４年２月１４日 土曜日 午後３時２４分 Table of contents Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 The remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . .5 Tape information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Discs that can be played . . . . . . . . . . . . . . . . . . . . . . .6 Disc handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7708en-p04-31.fm 4 ページ ２００４年２月１６日 月曜日 午後２時７分 Accessories Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts. The remote control Batteries Remote control To order accessories, refer to “Accessory Purchases” on page 55. ∏ 1 Remote control (EUR7722X20) ∫ Batteries ∏ 2 Batteries for remote control ∏ 2 AC power supply cords (K2CB2CB00006) ≥Insert so the poles (i and j) match those in the remote control.
IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 10) Protect the power cord from being walked on or pinched 1) Read these instructions. particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 2) Keep these instructions.
7708en.book 6 ページ ２００４年２月１４日 土曜日 午後３時２４分 Discs that can be played Disc Logo Indication in these operating instructions [RAM] DVD-RAM [JPEG] DVD-Audio Remarks Recorded using Version 1.1 of the Video Recording Format (a unified video recording standard). ≥Recorded with DVD video recorders, DVD video cameras, personal computers, etc. ≥Remove discs from their cartridges before use. Recorded using the DCF (Design rule for Camera File system) standard.
Control reference guide ≥If [SHIFT] appears after the button name the function will not work unless you use with [SHIFT] button. Make sure to press [SHIFT] and the button.
Control reference guide ≥If [SHIFT] appears after the button name the function will not work unless you use with [SHIFT] button. Make sure to press [SHIFT] and the button. Remote control—VHS operation A VHS remote control mode button [VHS] . . . . . . . . . . . . . . . .32 Switch the remote control mode to VHS. Make sure you press before doing VHS operations. When in VHS mode, the [VHS] button lights each time you press one of the VHS operation buttons indicated below. 1 Numbered buttons [1–9, 100, 0] . .
Main unit and subwoofer ∫ Common buttons [1] Power button [Í/I POWER]. . . . . . . . . . . . . . . . . . . . . . . . . . 17 Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. [2] Remote control signal sensor [3] Source selector button [INPUT SELECTOR] VHS>DVD/CD>FM>AM ^"""""""""""""n [4] Demo button [–DEMO]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 [5] Display [6] Headphone terminal [PHONES] . . . . . .
Simple setup 1 STEP Assembly and connection of front and surround speakers ≥You can attach the speakers directly to their bases (if you want to put them on shelves, for example). [Note] ≥Never short-circuit positive (i) and negative (j) speaker wires. Be sure to connect only positive (copper) wires to positive (i) terminals and negative (silver) wires to negative (j) terminals. Incorrect connection can damage the speakers. Caution Hold the speakers by the sides.
7708en.book 11 ページ ２００４年２月１４日 土曜日 午後３時２４分 Other speaker setup options (Center speaker only) ∫ Attaching to a wall [Note] ≥The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg (22 Ib.) per screw. Consult a qualified building contractor when attaching the speakers to wall. Improper attachment may result in damage to the wall and speakers. ≥Do not attempt to attach these speakers to walls using methods other than those described in this manual.
7708en.book 12 ページ ２００４年２月１４日 2 STEP 土曜日 午後３時２４分 Locating How you set up your speakers can affect the bass and the sound field. Note the following points. ≥Place speakers on flat secure bases. ≥Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains. ≥The front left, right and surround speakers are all the same.
3 STEP Connecting speakers with the subwoofer Sheet of speaker-cable stickers Speaker cables ≥1a4-m (13-foot) cable (For Center speaker) ∫ Attaching the stickers to the speakers Attach the speaker-cable stickers to make connection easier. Short cables Long cables Copper 1 3 2 4 Silver 5 1 Front (L) 4 Surround (R) 3 Surround (L) 5 Center 2 1435 Click! 6 Subwoofer [Note] ≥Never short-circuit positive (i) and negative (j) speaker wires.
7708en.
7708en.book 15 ページ ２００４年２月１４日 土曜日 午後３時２４分 For better video from DVD The following connections are for video from the DVD section only. Make sure you have connected the VIDEO OUT terminal with the television to view video from the VHS section (➜ page 14). You may need to change the video-input mode on the television to view video from the VHS and DVD sections. Read your television’s operating instructions for details.
5 STEP Radio and system connection DVD Y RF IN 75 FM ANT LOOP AM ANT DVD/ VHS EXT VIDEO OUT VIDEO IN PB/CB RF OUT LOOP ANT GND L PR/CR R EXT COMPONENT VIDEO OUT S-VIDEO OUT LINE OUT AC IN LINE IN Conserving power The system consumes a small amount of power, even when it is turned off. The amount of power used depends on the display setting (➜ page 42): BRIGHT: 3.8 W DIM: 3.5 W OFF: 2.
7708en.book 17 ページ ２００４年２月１４日 6 STEP 土曜日 午後３時２４分 Plug-in Auto Tuning After plugging the unit into your household AC outlet and pressing [Í] to turn the unit on for the first time, the unit automatically tunes in all the channels it can receive and sets the clock. TV INPUT SELECTOR DVD/VHS FM/AM The unit determines the type of transmission, TV or CATV, as follows: TV: when there are less than 5 CATV channels. CATV: when there are 5 or more CATV channels.
7708en.book 18 ページ ２００４年２月１４日 7 STEP 土曜日 午後３時２４分 Operating the television ∫ TV maker setting You can control the television by entering the remote control code. TV 1 INPUT SELECTOR DVD/VHS FM/AM TV DVD 2 TV VHS DISC 1 DISC 2 DISC 3 1 2 3 DISC 4 DISC 5 4 5 6 8 9 PICTURE MODE 7 2 CH Aiming the remote control at the television While pressing and holding [TV] ( TV ), press the numbered buttons to enter the code number. CH ≥Example: To select 01, press [0] ➜ [1].
8 STEP DVD QUICK SETUP Turn on the television and select the video input for the DVD. The QUICK SETUP screen assists you to make necessary settings such as: ≥Menu Language (➜ page 31) ≥TV Type (➜ page 30) ≥TV Aspect (➜ page 30) 1 2 3 4 5 6 7 Press [DVD] to put the remote control in DVD mode. Press [Í] to turn on the unit. Press [DVD/VHS] to select “DVD/CD” as the source. Press [SHIFT]i[SETUP] to show QUICK SETUP screen. Follow the messages and make the settings using [3 4 2 1] and [ENTER].
7708en.book 20 ページ ２００４年２月１４日 土曜日 午後３時２４分 Basic play DVD Turn on the television and select the appropriate video input for the DVD. 1 Put the remote control in DVD mode. 2 Turn on the unit. POWER DVD 4 4 Select the disc tray.
7708en.book 21 ページ ２００４年２月１４日 土曜日 午後３時２４分 [Remember] Press [DVD] first.
7708en.book 22 ページ ２００４年２月１４日 土曜日 午後３時２４分 Convenient functions DVD TV POSITION MEMORY PROG INPUT SELECTOR DVD/VHS FM/AM DVD VHS TV DISC 1 DISC 2 DISC 3 1 2 3 DISC 4 DISC 5 4 5 Position memory Memorizes the position to resume play. TUNER DVD VOLUME 8 9 ENTER SETUP Subtitle MIX 2CH SUBTITLE S10 0 100 Expands the letterbox picture to fit the screen. 6 PICTURE MODE 7 Zoom ZOOM SPEED CH SLOW/SEARCH SKIP JET REW OPEN/CLOSE/EJECT Changes the subtitle language.
Multi Re-master Enjoys more natural sound. Page skip Selects still pictures. CD Mode (CD sequential play) Plays discs in succession. Quick replay Replays a scene. See below for details. [RAM] [DVD-V] (Discs recorded with 48 kHz only) [DVD-A] (Discs recorded with 44.1 kHz and 48 kHz only) [VCD] [CD] ≥During 2ch output of these discs, this feature gives you a more natural sound by adding the higher frequency signals not recorded on the disc, for example, playing DVD-Video recorded with 48 kHz at 96 kHz.
Convenient functions All group/Program/Random play See below and the following page for details. ≥[VCD] [CD] Step 1 is unnecessary when programming tracks on the same disc. ≥[DVD-A] [DVD-V] [WMA] [MP3] [JPEG] To select an item using the cursor buttons Press [ENTER] and [3 4] to select an item, then press [ENTER] again to register. All the items in the selected disc, title or group are selected when you select “ALL”. While stopped, press [PLAY MODE].
Repeat play See below for details. (Only when the elapsed play time can be displayed [JPEG]: Works with all JPEG content.) [VCD] [CD] 1-DISC (RND): You can play all the items on a disc in the play position in random order. A-DISC (ALL RND): You can play all the items on all the discs in random order. [DVD-A] [DVD-V] [WMA] [MP3] [JPEG] You can play selected item(s) on a disc in the play position in random order.
Using navigation menus DVD VHS TV DISC 1 DISC 2 DISC 3 1 2 3 DISC 4 DISC 5 TUNER DVD Numbered buttons TOP MENU 4 5 6 8 9 VOLUME Playing HighMAT discs SLOW/SEARCH SKIP JET REW OPEN/CLOSE/EJECT TOP MENU DIRECT NAVIGATOR MENU or NAVI S10 0 100 TOP MENU ENTER SETUP Playing data discs CH PICTURE MODE 7 MENU or NAVI CD MODE NAVI MENU TOP MENU NAVI DIRECT NAVIGATOR PLAY LIST DIRECT NAVIGATOR MENU PLAY LIST Playing the programs ENTER OSD/ DISPLAY OSD/ DISPLAY TV
7708en.book 27 ページ ２００４年２月１４日 土曜日 午後３時２４分 [Remember] Press [DVD] first. Playing HighMAT discs Playing the programs [WMA] [MP3] [JPEG] [RAM] 1 2 1 Press [TOP MENU]. Press [3 4 2 1] to select the item following the on-screen instructions. e.g. New Playlist Item Long Name Display Te Menu1 P l ay l i s t 2 2 Prev PAG E 1 / 3 P l ay l i s t 1 Menu2 Menu3 P l ay l i s t 3 3Return Next1 Menu: Takes you to the next menu which shows play lists or another menu Playlist 3 No.
7708en.book 28 ページ DVD ２００４年２月１４日 土曜日 午後３時２４分 Using On-Screen Menus Refer to page 7 for remote control button positions. 1 2 3 Go to the next menu Select OSD/ DISPLAY ENTER Return to the previous menu Press once. 4 Select 1 2 3 4 5 6 7 8 RETURN ENTER Register Register Select the menu. 9 ENTER 0 S10 Make the settings. Press to exit. (When pressed twice, the elapsed play time indicator appears. ➜ below) Items shown differ depending on the type of software.
7708en.book 29 ページ ２００４年２月１４日 土曜日 午後３時２４分 [Remember] Press [DVD] first. Other settings [RAM] [DVD-V] To change play speed – from k0.6 to k1.4 (in 0.1 units) Play Speed ≥After you change the speed –Output is in stereo. –Sampling frequency of 96 kHz is converted to 48 kHz. ∫ Audio Menu Dolby Pro Logic II Dialogue Enhancer ∫ Play Menu (Only when the elapsed play time can be displayed [JPEG]: Works with all JPEG content.
7708en-p04-31.fm 30 ページ ２００４年２月１７日 火曜日 午前８時５５分 Changing the player settings DVD Refer to page 7 for remote control button positions. 1 2 3 4 Select SHIFT r 5 Select Select SETUP 100 ENTER ENTER Go to right Shows Setup menu. 2 3 4 5 6 7 8 ENTER Register Select the tab. 1 Register Select the item. ≥The settings remain intact even if you switch the unit to standby. ≥Underlined items are the factory preset. 9 SHIFT r SETUP 100 ENTER 0 S10 Make the settings.
∫ “Display” tab Menu Language ≥English ≥ Français On-Screen Messages ≥On ≥Off ≥Español ∫ “Others” tab HighMAT ≥Enable ≥Disable (Unable to use the HighMAT function.) QUICK SETUP ≥Yes Re-initialize Setting ≥Yes: The password screen is shown if “Ratings” (➜ page 30) are set. Please enter the same password. After “INIT” on the display disappears, turn the unit off and on again. ≥No This returns all values in the Setup menus to the default settings.
7708en.book 32 ページ ２００４年２月１４日 土曜日 午後３時２４分 Playback VHS Turn on the television and select the appropriate video input for the VHS. 1 Put the remote control in VHS mode. 2 Turn on the unit. POWER VHS Play starts automatically if you insert a prerecorded tape or one that has had its tab removed. INPUT SELECTOR Í/I TV 4 Insert a tape. 3 Select “VHS”.
7708en.book 33 ページ ２００４年２月１４日 土曜日 午後３時２４分 [Remember] Press [VHS] first. TV INPUT SELECTOR SHIFT DVD/VHS FM/AM VHS PICTURE MODE DVD VHS TV DISC 1 DISC 2 DISC 3 1 2 3 DISC 4 DISC 5 4 5 6 8 9 7 PICTURE MODE 7 Picture mode Changes the picture quality to suit the material you are playing. TUNER CH PICTURE MODE i CH CH Press and hold Repeat play Plays a program repeatedly.
7708en.book 34 ページ ２００４年２月１４日 TV Preparation Turn on the television and select the video input for the VHS. INPUT SELECTOR DVD/VHS FM/AM Numbered buttons 午後３時２４分 Manual recording VHS DVD VHS 土曜日 DVD VHS TV DISC 1 DISC 2 DISC 3 1 2 3 DISC 4 DISC 5 4 5 TUNER FM/AM DVD/VHS TUNER TV CH 6 PICTURE MODE i SHIFT CH CH REC Recording a program VOLUME 7 8 9 ENTER SETUP S10 0 100 See below for details.
7708en.book 35 ページ ２００４年２月１４日 土曜日 午後３時２４分 [Remember] Press [VHS] first. Using another source while recording Recording from other equipment You can watch and listen to other content when the unit is in timer recording standby or during VHS recording. You can record from other video equipment (video cassette recorder, camera, etc.) ∫ Television (➜ page 18) Preparation ≥Connect the equipment to this unit’s input terminals. –Turn the unit off before making connections.
7708en.book 36 ページ ２００４年２月１４日 土曜日 午後３時２４分 Timer recording VHS TV You can create up to 16 timer recording programs. You can set the timer to record an individual program up to a month in advance, record at the same time on the same day every week, or at the same time daily.
7708en.book 37 ページ ２００４年２月１４日 土曜日 午後３時２４分 [Remember] Press [VHS] first. To check, correct, and cancel timer programs ∫ To check a program Press [PROG]. The timer-programming screen appears. ∫ To correct a program While the timer programming screen is on the television, 1 Press [PROG] to highlight the program you want to correct and press [ENTER]. 2 Select the item with [2 1] and correct it with [3 4].
Finding programs with the Jet Navigator and VHS Index Search System (VISS) TV The unit saves the date, channel, time, and category of the recordings you make and shows them on the Jet Navigator list, making it easier to find and play them. It can save the data for up to 14 recordings on a tape, for 20 different tapes, and for a total of 50 recordings.
7708en.book 39 ページ ２００４年２月１４日 土曜日 午後３時２４分 [Remember] Press [VHS] first. Setting categories Set categories to make it easier to see what kind of programs are in the list. 1 Press [1] (cursor) while the program you want to categorize is highlighted. 2 Press [3 4 2 1] to select a category and press [MENU] to confirm and return to the previous screen. Finding programs—VHS Index Search System (VISS) Use the index marks on a tape to find sections to play.
7708en.book 40 ページ ２００４年２月１４日 土曜日 午後３時２４分 Changing settings VHS TV 1 INPUT SELECTOR DVD/VHS FM/AM 2 3 4 Select VHS [1], [2] DVD VHS TV DISC 1 DISC 2 DISC 3 3 MENU 1 2 DISC 4 DISC 5 4 5 CH 7 8 Register 9 Shows VHS MENU. ENTER S10 0 Register Select the item. Make the settings. Press to exit. SLOW/SEARCH SKIP JET REW OPEN/CLOSE/EJECT ≥The settings remain intact even if you switch the unit to standby.
7708en.book 41 ページ ２００４年２月１４日 土曜日 午後３時２４分 [Remember] Press [VHS] first. CHANNEL SET The unit tunes automatically after you plug it in and turn it on for the first time (➜ page 17, Plug-in Auto Tuning), but you can start the process again if necessary. ≥Make sure you have tuned to a television channel. This does not work if you have selected “AU” channel. 1 While VHS MENU is displayed (➜ page 40) Press [3 4] to select “CHANNEL SET” and press [ENTER].
7708en.book 42 ページ VHS ２００４年２月１４日 土曜日 午後３時２４分 Changing settings Refer to the remote control illustration on page 40. REMOTE CONTROL OPTION 1 Panasonic video cassette recorders use the same remote control system so they may respond unintentionally to a command from this remote control. Change the code on this unit and its remote control (the two must match) if you place another Panasonic video cassette recorder close together. ≥Use “1”, the factory preset, under normal circumstances.
Refer to the remote control illustration on page 40. On-screen display To see these displays, set the OSD item in the OPTION menu to ON. Press [OSD/DISPLAY]. The time and operation details appear on the screen for about 5 seconds. CH 1 STEREO LR 0:00.22 1 SP 1 STANDARD 1 Channel display Displays the cable television channel or television channel currently being received. 2 STEREO/SAP indication Indicates when a program is broadcast in stereo or SAP. ➜ right for audio type details.
The radio Press [TUNER] to put the remote control in TUNER mode. Up to 15 stations can each be set in the FM and AM bands. 1 2 3 Press [FM/AM] to select “FM”. 1 2 Press [6] or [5] to tune to the lowest frequency (“FM 87.9” MHz or “FM 87.5” MHz). Press and hold [ENTER]. Press [FM/AM] to select “FM” or “AM”. Press the numbered buttons to select the channel. Alternatively, press [W CH] or [X CH]. To select a 2-digit number e.g. 12: [S10] ➜ [1] ➜ [2]. Release the button when “AUTO” is displayed.
RQT7708 45
Sound field and sound quality Sound Field Control Changes the sound quality. Super Surround Adds surround effects to stereo sound. Center Focus For clearer dialogues. “DVD/CD” as the source only Dolby Pro Logic II Changes stereo sound to surround sound. “VHS”, “FM” or “AM” as the source only Dolby Pro Logic Changes stereo sound to surround sound. [Note] You may experience a reduction in sound quality when these sound field systems are used with some sources.
7708en.book 47 ページ ２００４年２月１４日 DVD VHS TV DISC 1 DISC 2 DISC 3 1 2 3 DISC 4 DISC 5 4 5 6 8 9 TUNER “DVD/CD” as the source only C.S.M SFC r SHIFT Custom Sound Memory Stores up to 30 sound setting (one setting per disc). VOLUME ENTER SETUP SHIFT SLOW/SEARCH SKIP JET REW OPEN/CLOSE/EJECT “DVD/CD” as the source only VOLUME S10 0 100 午後３時２４分 CH PICTURE MODE 7 土曜日 r CD MODE MENU TOP MENU Down-mixing Down-mixes multi-channel signals to 2 channels.
7708en.book 48 ページ ２００４年２月１４日 土曜日 午後３時２４分 Other convenient features TV INPUT SELECTOR DVD/VHS FM/AM SHIFT DVD VHS TV DISC 1 DISC 2 DISC 3 3 1 2 DISC 4 DISC 5 4 5 TUNER r SLEEP PL Sleep timer Turns the unit off after a set time. CH 6 PICTURE MODE VOLUME 7 8 9 ENTER SETUP VOLUME S10 0 100 PROGRESSIVE MUTING JET REW OPEN/CLOSE/EJECT Muting Mutes the sound.
Optional connections ≥The equipment connections described are examples. ≥Peripheral equipment and optional cables sold separately unless otherwise indicated. ≥Before connection, turn off all equipment and read the appropriate operating instructions. Listening to an external source/Recording to other equipment [A] You can record sound from discs, video cassette tapes, or radio, etc., to a tape deck. Audio cable (not included) White (L) Red (R) 1 Discs Press [DVD/VHS] to select “DVD/CD” as the source.
7708en.book 50 ページ ２００４年２月１４日 土曜日 午後３時２４分 Optional connections If the antenna connector doesn’t match Other antenna connections to the unit Other antenna connections from the unit to the television Use one of the following connections to suit the antenna lead. ≥If your television has both lead and coaxial VHF terminals, use the lead connection to minimize signal loss. Use one of the following connections to suit the antenna terminals on your television.
7708en.
7708en.book 52 ページ ２００４年２月１４日 土曜日 午後３時２４分 Troubleshooting guide Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the “Customer Services Directory” on page 55. Power Page No power. ≥Insert the AC power supply cords and system cable securely. 16 The unit is automatically switched to the standby mode. ≥The Sleep timer functioned.
7708en.book 53 ページ ２００４年２月１４日 土曜日 午後３時２４分 Picture incorrect Picture distorted. ≥Ensure that the unit is connected directly to the television, and is not connected through an A/V selector or other equipment. 14 The television may display incorrectly or colors appear faded. ≥The unit and television are using different video systems. Use a multi-system or NTSC television. ≥The system used on the disc doesn’t match your television. PAL discs cannot be played.
7708en.book 54 ページ ２００４年２月１４日 土曜日 午後３時２４分 Troubleshooting guide Unit display The unit’s display lights and ≥Demo function is on. Press and hold [–DEMO] on the main unit to select “DEMO OFF”. changes when the unit is turned off. 16 The unit’s display disappears or fades once the unit is turned off. ≥The DISPLAY setting is set to “DIM” or “OFF” under OPTION from the VHS MENU. Select “BRIGHT” if you want the display bright all the time. 42 The tape counter isn’t changing.
Limited Warranty Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc., Ave. 65 de Infantería, Km. 9.
7708en.book 56 ページ ２００４年２月１４日 土曜日 午後３時２４分 Index Common Batteries........................................................................................... 4 Center Focus ................................................................................. 46 Cleaning Discs ........................................................................................... 6 Main unit ................................................................................... 54 Video heads..................................
